Model DM20CNC Max. drilling capacity: 20mm Max. face milling capacity : 63mm Max. end milling capacity : 20mm Spindle taper : MT2 T-slot size/distance/No : 12mm/63mm/3 Table size : 500x180mm z travel : 275mm Y travel : 135mm x travel : 300mm Rate of feed z axis : 2000mm Rate of feed y axis : 3000mm Rate of feed x axis : 3000mm spindle speed 80-3500rpm(vario speed) positioning accuracy 0.02/300mm Rep positioning accuracy 0.01mm X stepping motor torque 3N. M Y stepping motor torque 3N. M Z stepping motor torque 4N. M Spindle motor power 600W/380V~50HZ 850W/220V~50HZ. N. W /G. W 300kg /340kg Packing size 1300*1000*1680mm.
MODEL C370R BLASTHOLE DRILL SPECIFICATIONS RATED CAPACITY : Nominal hole size 10 5/8” (270 mm) to 12 ¼” (311 mm)dia by Rotary method . Total depth capacity: 160’ with 40’ long drill pipe STANDARD MOUNTING : CAT USA, 200mm Triple grouser track long with 13 bottom rollers and 3 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 1.6 KMPH on plain grounds and 0.8 KMPH on Gradients. Gradeability upto 25% grades with Mast down. PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 43’ head travel for handling 40’ long drill pipe. Bit Loading : 80,000 LBS. Hoisting capacity : 33,000 LBS. Standard feed rate : 12 FPM Standard hoist rate : 25 FPM Fast feed rate : 80 FPM Fast hoist rate : 170 FPM MAST : Electrically welded square and rectangular steel tube construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 52’ 2” for 40’ long drill pipe. ROTARY HEAD : Axial piston hydraulic motors driven top head drive through Planetary gearbox and spur gear reduction with a constant torque of 1,08,000 Inch-pounds at 0 - 150 RPM infinitely variable speed. AIR COMPRESSOR : Screw compressor with a capacity of 1880 CFM at 100 PSI. PRIME MOVER : CAT USA make Diesel engine model C23 or Cummins Make QSK23 800 H.P running @ 1800 RPM and drives Screw compressor from the flywheel and a set of Hydraulic pumps from the front PTO. Emission norms as per EPA TIER III. Fuel tank capacity: 1000 Lits DRILL PIPE HANDLING : Hydraulically operated 4 pod loader suitable for handling 10 ¾” dia , 40’ long drill pipe Hydraulic power breakout system and stem wrench are provided as standard. LEVELLING JACKS : Three hydraulic jacks – one front 200mm bore, 48” stroke and two rear 160mm bore, 48” stroke equipped with heavy duty telescopic guide tubes and lock check valves for safety. OPERATOR’S CAB : Fully enclosed steel fabricated, sound suppressed to 85dB, spacious, Double panelled and safety glassed cab with centralised Electric “Joy stick” controls for operator’s convenience. Adjustable seat for operator’s comfort and a seat for helper DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor driven suction blower and dry type filter cartridges. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, fan and auxiliary circuits. Axial piston, variable volume pumps - 2 no’s, 58 GPM each at 4000 PSI for Tram/Rotation circuit. Axial piston variable volume pump 18 GPM at 3000 PSI for feed circuit. Tandem gear pump 64 GPM at 3500 PSI for ROC fan circuit and 26 GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters and pressure filter for pilot line. Relief valves in all circuits. POWER BREAKOUT : Hydraulically operated Power Breakout system for easy removal of drill pipes. NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times. Lights suitable for 24V, DC supply. ANGLE HOLE DRILLING : Angle hole drilling kit upto 25 in steps of 5. WINCH : Hydraulic winch is provided for handling accessories. ACCESSORIES : Four nos of Drillpipes, Two nos Spindle subs and one no each of Bitsub, Hammersub,Bit breakout baskets are supplied. OPTIONAL EQUIPMENT : Centralised Lubrication system Water injection system with water tank Shocksub for rotary head Rotary Deck Bushing Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system.
MODEL C650D-EXP BLASTHOLE DRILL SPECIFICATIONS RATED CAPACITY : Nominal hole size 7-7/8¡¨(200 mm ) by Rotary method, Upto a depth of 148¡¦ (45.12 m) using 30¡¦ long 6.25¡¨ OD drill pipes. STANDARD MOUNTING : Tengl, India make Under Carriage model T23/D4 , 24¡¨ Triple grouser track 10¡¦ 6¡¨ long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33¡¦ head travel for handling 30¡¦ long drill pipe. Pulldown capacity : 35,000 LBS. Hoisting capacity : 20,000 LBS. Standard feed rate : 14 FPM Standard hoist rate : 25 FPM Fast feed rate : 70 FPM Fast hoist rate : 124 FPM MAST :Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38¡¦ for 30¡¦ long drill pipe. ROTARY HEAD :Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR :Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER : Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING : Hydraulically operated Four pod loader suitable for handling 6.25¡¨ OD x 30¡¦ long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48¡¨ stroke; two rear 125 MM bore, 36¡¨ stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPERATOR¡¦S CAB :Fully enclosed spacious steel fabricated, sound suppressed, thermal insulated, Air-conditioned and safety glassed cab with centralised controls for operator¡¦s convenience. Adjustable seat for operator¡¦s comfort and a seat for Helper. DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor driven blower and dry type filters. NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times. Lights powered by engine alternator at 24V, DC supply. WEIGHT AND DIMENSIONS :(Approx.) Length(mast down) : 43¡¦ 0¡¨ Length(mast up) : 32¡¦ 0¡¨ Width : 14¡¦ 2¡¨ Height(mast down) : 16¡¦ 0¡¨ Height(mast up) : 42¡¦ 6¡¨ Operating Weight : 73,500 LBS OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank Angle hole drilling kit upto 25„a in steps of 5„a. 122
Models zm12\15\18t series electric coal drills are made up by flame-proof motor, reducer, switch and operation system. In order to operational safety, the handle of drill, switch hand and enclosures wind must be made of insulation plastic. Mine cable size uz34, connect after putting the plastic sleeve on the flaking tinning. Pay attention to the mark ¡° ©û ¡± on the connectors, absolutely cannot meet wrong.
Circulating valve is for the drill stem testing, the spec. Is according to the casing size and casing weight.
Air suction motor power: P2=4kw Motor power: P=1.5x16kw=24kw Drilling length: L=2440mm Hydraulic station power : 3Kw Drilling depth: H=35mm Processing width: B=1220mm Drill row wheelbase: A=32mm Drill row by row distance: P=64mm Air pressure : P=0.6-0.8Mpa Drillng shaft number : N=20x8=160pcs Weight of machine: G=3800 kgs Exterior dimensions: 4000x2400x1800mm. Wooden case.
Trumil offer precision grade drill sleeves of various sizes, made from 20MNCR5, case hardened to 55-58 HRC, as per is : 9094(1) -1979. Export worth packing.
1.Type: twist drill bits, center drill bits, short shank drill bits, tapper shank drill bits, spotting drill bits. 2.Material:hss, hss-e, carbide, etc. 3.Coating:tin, bright, ticn, etc. Individual in plastic case.
Call or email for details
We manufactures various drilling rigs (1000HP¡«3000HP), incl. AC variable frequency, DC motor, mechan-electric, and mechanical driven rigs. The Company has the capability of design, manufacture, and final assembly (commission) of complete set of rigs and provides our customers with comprehensive solutions & service of complete set of rigs to ensure them receive the highest quality oilfield products and services. * This kind of DC driven rig is available in four models. 1000HP ZJ40/2250DZ 1500HP ZJ50/3150DZ 2000HP ZJ70/4500DZ 3000HP ZJ90/6750DZ Notes : DZ-Drilling rig driven with D.C. motor; * This kind of AC variable frequency driven rig is available in four models. 1000HP ZJ40/2250DB 1500HP ZJ50/3150DB 2000HP ZJ70/4500DB 3000HP ZJ90/6750DB Notes : DB-Drilling rig driven with A.C. motor with frequency converter. Basic parameters of this kind of rig are in accordance with SY/T5609-1999 Type & Basic Parameters of Oil Drilling Rigs: * DC driven rig adopts international advanced AC-SCR-DC power system, realizing the stepless speed regulation for drawworks, rotary table and mud pump to obtain better drilling performance. * AC variable frequency rig uses VFD and digital control technology, simplifying drawworks construction and enhancing drilling performance. * Main components are manufactured in conformity with API Spec and applied API monogram on them.
This kind of rig is available in three models. 1000HP, 1500HP, 2000HP. The drilling rig is driven by diesel engines, hydraulic coupling & chain compound box or diesel engines, reducers & narrow V-belt, which provides smooth mechanical power to the drawworks. A number of hoisting speeds and rotary speeds are available. Main mechanical parts are in conformity with API Spec and applied API monogram on them.
This kind of rig is available in four models 1000HP, 1500HP,1500HP, 2000HP. Power: three-(or four)-diesel-engine (2000 or 3000 series) linkages, which are connected with couplers and reducer casings. * The drawworks and the mud pump are mechanically driven. The rotary table is independently driven by an AC/DC variable frequency motor. * Easy installation and better sealing as a result of taking an integral chain box or V-belt compound transmission unit. * The drawworks is equipped with the grooved drum and shifting a gear for it is carried out by air cylinders. The hydraulic disc brake is regarded as main brake and the eddy current brake as auxiliary brake. * The rotary table is driven independently by AC variable frequency motor and can accomplish stepless speed regulation with 0~210r/min. AC is supplied by an auxiliary generator set. * Main mechanical parts are manufactured in conformity with API Spec and applied API monogram on them.
There are seven models available F-1300,F-1600,3NB500C,3NB1000C,3NB1300C,3NB1600 ,LN1600H. F Series Mud Pumps: The power end: The housing is of welded steel-plate construction. It is stress-relieved after welding. The pinion shaft and the gear are herringbone gears with recess, which allow smooth operation with high efficiency and long life. The crankshaft is a one-piece steel casting. The power end is splash and pressure lubricated. The fluid end: The valve seat, the liner, the suction and the discharge flanges conform to API specifications
WG type roller reamer is used for reaming in drilling operation,especially used for the function of stabilization in drilling of the abrasive formation,it is a very popular tool, this tool can equip with three structure rollers and be suitable for hard formation in reaming operation. Type T is machined with hardfaced sharp teeth for soft formation. Type F is hardfaced flat teeth with anti-abrasive welding rod on its surface for medium hard formation. Type B is with pressed-in tungsten carbide buttons, for hard formation. 1. Minimum order quantity: 1set/sets 2. Packing: by plywood case or as per your requirements 3. Delivery time : 30days 4. FOB port: Dalian port , Tianjin port or according to your requirements 5. Payment: T/T or L/C 6. Standard: API and petroleum department.
We manufacture and supply carbide tipped slot drill which is widely used in the automobile and engineering industries. Sophisticated machinery is applied in the manufacture of our acclaimed assortment of products which is as per the norms and the standards. We offer customization of this range as per the needs of the client. It has following specifications: • DIN 8027 • Parallel shank • 2 flutes with end cutting geometry • Center cutting • 2 Straight flutes • Range : Dia 6 to 45.
Our products include drill collar, drill pipe, heavy weight drill pipe, stabilizer, subs, hole opener, roller reamer, casing scraper, key seat reamer, kelly valve, full opening safety valve, ft type drop-in check valve, fj type-arrow back pressurevalve, inside bop, float valve sub, by pass valve, cup tester, wear sub, circulating sub, cross over sub, reduce sub, saver sub, lift sub, different of drilling jar, fishing jar, shock absorber, bumper jar, oil jar, bumper sub, jar intensifiers. We also manufacture bowen 150, bowen70, bowen 20, overshot and spear, bowen 150, bowen70, bowen 20, overshot and spear, also different king of oilfield fishing tools, fishing magnet, milling tools(different kind of mill shoe and tap), internal casing cutter, external casing cutter, marine or mechanical, hydraulic bucking unit, downhole motor and tester, jar tester.
Plant & machinery > drilling & boring equipment Offer description: We are offering carbide tipped drill. Tapper shank to DIN 8041 Point angel 118 degree Web thining as per DIN 1412A Parellel shank Range: dia 6 to 32.
We offer carbide tipped end mill which gives immaculate performance through its usage in the engineering and the automobile industries. High grade raw material ids made use of in the making of this range, adhering to the requisite norms. Also, we customize according to client specifications. It includes the following specifications: • DIN - 8044 Parallel Shank • Straight Flutes • Helical Flutes • HelixAngle8°to16° • Range: Dia 6 to 50.
Model : C650D-EXP blasthole drill Specifications: Rated capacity : Nominal hole size 7-7/8(200 mm ) by Rotary method, Upto a depth of 148 (45.12 m) using 30 long 6.25 OD drill pipes. Standard mounting : Tengl, India make Under Carriage model T23/D4 , 24 Triple grouser track 10 6 long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. Pulldown and hoist :Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33 head travel for handling 30 long drill pipe. Pulldown capacity: 35,000 LBS. Hoisting capacity: 20,000 LBS. Standard feed rate: 14 FPM Standard hoist rate: 25 FPM Fast feed rate: 70 FPM Fast hoist rate : 124 FPM MAST : Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38 for 30 long drill pipe. ROTARY HEAD : Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR: Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER: Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING: Hydraulically operated Four pod loader suitable for handling 6.25 OD x 30 long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48 stroke; two rear 125 MM bore, 36 stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank.
Undercarriage parts.
