Hydraulic Tubing Drains for use with deep hole drilling tools, downhole devices and other oil and off shore drilling applications provide an accurate method to equalize the fluid level in tubing strings, without mechanical manipulation.
All Tubing Drains are made from high quality Alloy material and use brass shear screws. Replacement parts for all components are available from stock.
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction
Working principle
The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps
Drilling out
Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
Drill collars are extra-heavy integral tools used to concentrate weight onto the drill bit so as to produce sufficient force for the drill bit to break rock efficiently while drilling. They are made of AISI 4145H or 4145H modified steel and are connected between drill pipes and drill bits.
Our drill collar connections comply with dimensional requirements specified in API Spec 7-1. Drill collars also come with slip and elevator recesses for safe and efficient handling. Slip and elevator recesses can be used together or separately.
Contact Us
For more information, you can contact me :
It is recommended that centralizers be used on the rods for reduction of rod string and oil well tubing wear. The centralizers can be fixed; they can be installed directly on the rod body by pressure die casting method. The rotating centralizers are located between the locks on the rod body and can rotate on the same. Apart from ensuring wear protection, centralizers prevent deposits formation inside oil well tubing and increase the time between well overhauls.
2019 oil well down hole centralizers sucker rod centralizer
product show :
2019 oil well down hole centralizers sucker rod centralizer
2019 oil well down hole centralizers sucker rod centralizer
Company Information
Our Services
1. Are you manufacturer or trader company?
We are manufacturer and we could supply more professional technical services and goods.
The goods are new or used, if you will make technical drawing and production plans for us?
All our goods are new ones, the production schedule will offer to you once getting your purchase order.
2. Do you have related inspection equipments?
Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you.
3. Could you tell me if your price includs the third party inspection charges?
No, our price do not include the third party inspection charge, and we will notice on our Quotation.
4. Where did your products sell out?
United States, Canada, Mexico, Venezuela, Colubia, and other South American Region Russica, Azerbaijan and Central Asia Countires, UAE, Saudi Arabia and Mddle East Counties.
For more information, you can contact me :
Frac balls are inserted into wells to build up pressure in the ground. This high pressure created causes the fracking of specific identified areas. The balls vary in size, subject to its application. The frac balls should withstand high pressure and temperature in order to make a successful fracking process. The development of the dissolvable fracking ball has boosted functionality, efficiency of the technology, and saved on time and cost of retrieving them.
Our Dissolvable Metallic Frac Balls fully dissolve into particles much smaller than those of other products on the market.
The premium grade refined metal powders are blended then forged (not cast or sintered) into solid metal to ensure 100% theoretical density.
Our Services
For more information, you can contact me :
XY-1A well drilling rig, 150m small core drilling rig of china
Welcome to our factory in China,
Portable survey drilling rig, our company can provide video teaching, online engineering construction guidance, service first.
Water Well Drilling or Take rock core sample in mining exploration, geological survey.
XY-1A drilling rig is a multiple purposes light drilling rig. XY-1A is a model developed on the basis of XY-1, which is integrated with a hydraulic tower system.
The rigs are widely used for geological engineering investigation in various projects like water well, industrial and civil construction, railway, bridge, hydropower etc., and also for small diameter pile hole boring and anchor hole drilling.
Features:
1): wide range of R.P.M. and well-set gear
2): large torque in low R.P.M., suitable for core drilling and piling hole drilling and piling hole works.
3): mobile cylinder installed so that the drilling machine has a free travel of 400 mm, ensure easy operation of drilling stems
4): easy to handle, high efficiency, oil hydraulic feeding
5): stable and solid drilling tower with fewer single components. Easy for transportation and flexible in drilling angle adjustment (features of hydraulic tower, model XY-1A)
6): optimized structures, small volume and light weight.
Water Well Drilling or Take rock core sample in mining exploration, geological survey.
XY-200 drilling rig is a multiple purposes light drilling rig. XY-200 is a model developed on the basis of XY-1A, which is integrated with a hydraulic tower system.
The rigs are widely used for geological engineering investigation in various projects like water well, industrial and civil construction, railway, bridge, hydropower etc., and also for small diameter pile hole boring and anchor hole drilling.
Features:
1): wide range of R.P.M. and well-set gear
2): large torque in low R.P.M., suitable for core drilling and piling hole drilling and piling hole works.
3): mobile cylinder installed so that the drilling machine has a free travel of 400 mm, ensure easy operation of drilling stems
4): easy to handle, high efficiency, oil hydraulic feeding
5): stable and solid drilling tower with fewer single components. Easy for transportation and flexible in drilling angle adjustment (features of hydraulic tower, model XY-200)
6): optimized structures, small volume and light weight.
With the HY-50H drilling rig, the hoisting force is increased to 850 kg, which is a greater pulling force.
[50 machine high configuration parameters]
Drill rod length: 1 meter, 2 meters, 3 meters
Cylinder stroke: 600mm
Moving machine stroke: 200mm
Drill tower height: 4.5 meters
Diesel engine power: 8 horses
Rock core: 75-110mm (soil layer can be larger)
Applicable to: household well drilling, geological survey, drilling, grouting and other engineering projects.
Additional: the crawler chassis walking function can be added as needed, which is convenient for moving and reducing labor costs
1. With hydraulic automatic feed mechanism, improve drilling efficiency and reduce physical labor of workers.
2. The ball clamp clamping mechanism is used instead of the chuck, and the lever can be reversed without stopping the machine. The operation is convenient, safe and reliable.
The Ceramic Core Leaching Autoclave is designed for removing the silica-based ceramic cores. We have delivered many sets of core leaching autoclave to the aerospace turbine blades manufacturers all over the world. Except for the ceramic core leaching autoclave, we also can customize the core leaching autoclave for aluminum core.
The core leaching autoclave is widely used in high end precision castings manufacturing, and turns to be the most important core equipment during the investment casting.
Key features
â?¢ Efficiency : FUGE core leaching autoclave completes core leaching within several hours
â?¢ Safety : FUGE core leaching autoclave has no caustic liquid and air leaking to ensure the safety of environment and operator during its running .
â?¢ Stability : FUGE core leaching autoclave uses international brand key parts to ensure the reliable and stable running.
â?¢ Saving cost: FUGE core leaching autoclave use caustic and water circulating system aims to save costs.
â?¢ APC: FUGE core leaching autoclave is easy to operate and maintain through Siemens PLC control system and â??FUGEâ?? Advanced control technology.
â?¢ Telecommunication: FUGE core leaching autoclave has remote monitoring system facilitates the diagnosis and maintenance of the autoclave .
Parameter list
No. Name Specification
1 Model FG-TXF600 FG-TXF750 FG-TXF1065
2 Diameter 600mm 750 mm 1065mm
3 Depth 1200mm 1200 mm 1800mm
4 Effective working diameter 520mm 700 mm 990mm
5 Effective working depth 1000mm 1000 mm 1400mm
6 Maximum design pressure 10 bar 10bar 10bar
7 Normal working pressure 6 bar 6 bar 6 bar
8 Control system Siemens PLC Siemens PLC Siemens PLC
API 7-1 P530 Non magnetic Drill collar for oil&gas downhole drilling
The Non-magnetic drill collar is made of a kind of low carbon high chrome-manganese alloy steel, material normally is P530 or P550 or higher grades, which is refined after strict chemical composition ratio and forged to achieve its mechanical properties, this kind of drill collar has superb mechanical properties of low permeability and high strength. Mainly used for down hole directional drilling.
Our Strict control of chemical composition and special forging process guarantee the excellent mechanical properties of our non magnetic drill collar.
Special Treatment on ID: Roller Burnishing. (after roller burnishing, a comprehensive layer come into being)
Advantages:
Increase the corrosion resistance properties;
Increase the surface hardness of bore up to HB400;
Increase surface finish of bore to Ra 3.2m
Test and inspection carried out on each bar during production :
Chemical Composition;
Tensile Test;
Impact Test;
Hardness Test;
Metallographic Test (Grain Size);
Corrosion Test (According to ASTM A262 Practice E);
Ultrasonic Test over the whole length of the bar (according to ASTM A388);
BILLABONG HYDRAULIC WATER RAMS (BBHWRs)
BBHWRs IP ACQUISITION BUSINESS OPPORTUNITY
The BBHWRs are considered as an Icon in the Australian and Pacific Region water supply Industry.
A unique technology developed in Australia some 167 years ago. The BBHWRs uses only water to pump water. No other form of fuels (Petrol, Gas, Diesel, Solar, Wind etc.) is required for its operation. A high reliable technology renowned for its longevity. We have customers where a third generation of farmers in Far Nth. Queensland, Australia have been using the BBHWRs for more than 100 years.
As a part of our global expansion program, we are seeking BBHWRs Distributors and Licensees in various global locations.
We are also offering the Sale of the BBHWRs IP, under terms and conditions to be negotiated with the appropriate Party.
Note:
As an example, the above price of USD 1,500 (Ex Works, Melbourne, Australia) relates to BBHWR No.3 Selling Price.
Interested Parties should for further discussions contact in the first instance:
The Managing Director
Misal Technologies Pty. Ltd.
Australia
Mud Pump Piston
Mud Pump Piston assembly is the important spare parts and expendable parts of oil drilling mud pumps.
Mud Pump Pistons are made of high hardness alloy steel, and they are wear-resistant, anti-corrosive and anti-distortion after heat treatment. The seal of the piston can be made of polyurethane, polyether material and it can be also made of thiakol rubber.
Type: Bonded pistons, Replaceable pistons
Material of piston hub: forged by 45# steel or 40Cr with hardening and tempering
Material of piston cup: urethane NBR rubber
Surface treatment of piston hub: by phosphating and by Oxidizing
Size: 3 ~ 8 in
Brand: NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG
Horizontal Hole openers, also known as HDD reamer, are used to enlarge the diameter of a pre-drilled hole. They are custom built to specification, and come in a wide variety of sizes.
HDD is used when trenching and excavating is not practical. This drilling technology allows for a steerable trenchless way to drill underground. There are three stages, the first stage is to drill a small diameter pilot hole. The second stage is enlarge the hole with a larger diameter cutting tool called an HDD Reamer, Rock Reamer or Hole Opener. The third stage is inserting the casing pipe or other product into the enlarged hole.
Features:
1. The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling.
2. Directional crossing operation is widely used in unexcavated project.
3. Small torque force can be applied to hole opening with drilling machine.
4. Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes.
5. Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
