50M Small Core Exploration Drilling Rig

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

1. Equipped with the system of hydraulic feeding, which helps improve drilling efficiency and reduce labor intensity.

2. Safe and reliable, the drill adopts ball-type clamping mechanism, the anchor rod can be taken out without closing down.

3. The handles of concentrated distribution make the drill easy to operate and the hole pressure gauge can help you to grasp the drilling situation in operation.

4. Compact structure with less space occupying, the rig, pump and power machine are installed on the same base frame.

5. Lightweight and high decomposability, convenient to remove and suitable for operating in both plat and mountainous areas.

1. Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate.
2. Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc.
3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users.
4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.
5. The chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.

1. Applications of XYX-130 wheeled hydraulic core drilling rig
Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners.
2.Features of XYX-130 wheeled hydraulic core drilling rig
The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move.
Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency.
The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable.
The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process.
3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig
XYX-130 wheeled hydraulic core drilling rig
Drilling depth 130m
Max open hole caliber 220mm
End hole caliber 75mm
Drilling rod diameter 50mm
Drilling angle 90°-75°
Drill weight 950kg
Spindle 
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Windlass
Maximum lifting weight of single rope 1600kg
Single rope lifting speed 0.41 0.82 1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 27m
Mud pump
Type Horizontal single cylinder double action
Displacement diesel engine / motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Drilling depth 130m
Max open hole caliber 220mm
End hole caliber 75mm

Brand: HUANYU
Model: HY-50
Drilling depth: 0 - 5- meter
Weight: 280KG
Hole diameter(Soil): 110-200mm
Hole diameter(Rock): 75 - 110mm

Can be customized on request

Type 50 drilling rig is a high and medium speed drilling rig with hydraulic feed. Compared with other direct drilling rigs, it has the advantages of light weight, simple structure, convenient movement, fast drilling speed, and large core sampling diameter. It is currently common in China Hydraulic drilling rig. Particularly suitable for coring engineering and moving of special difficult terrain such as mountains, hills, rivers, etc. It is also suitable for engineering geological survey of railways, hydropower, transportation, bridges, dam foundations and other buildings; geological core drilling, physical survey, grouting Holes, wells, etc.

Weight: 350KG
Size(mm): 1400*800*1600
Diesel engine: R180 diesel engine (8 horsepower)

This HY-50 type drilling rig is a basic model, suitable for construction, no need to drill tower, directly connected to the drilling tool and drill pipe can be started, easy to operate, more suitable for small-diameter water wells or core use.

These types of Different Drilling Air Tool We are Exporting in the Global Market,

1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort;
2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity;
3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face;
4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole;
5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.

Product Introduction

1. Drills up to 100-200m deep, 75-500mm diameter.

2. Full hydraulic system and crawler mounted, easy to operate and move.

3. Drill on soil, sand, rock, quarry, marble and any hard ground.

4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc.

Main features

1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor.

2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city.

3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work.

4. 24V electric-start diesel engine reduces the operator's labor intensity.

5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance.

6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.

Product Description:
1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc.
2.With hydro-automatic feeding device, and high drilling efficiency.
3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes.
4.Close levers, convenient to operate, safe and reliable operations.
5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving.
6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas.
Product Parameter:
rated drill depth 200m
open hole diameter 200mm, max. 300mm
spindle rotation speed 118/236/505/1010 rpm
max. output torque 1500 N.m
max. lifting weight (single wire) 17 KN
drill rod diameter 42/50 mm
hole angle 90~75º
size (L x W x H) 1433 x 697 x 1273mm
weight 500 kg
diesel model S1100