Microcomputer Vertical Tensile Strength Tester, Computer paper tensile testing machine is widely used in paper, paperboard and other non-metallic materials tensile strength, elongation, tensile energy absorption determination test occasions.
To test the oxygen transmission rate (OTR) of packaging materials, such as plastic film, composite film, coextrusion film, aluminum-plated film, aluminum foil, infusion bag,etc.Widely used in the industries of food, pharmaceuticals, personal care, household, electronics and so on.
leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard.
we have 3 different chambers 210*270mm 360*585mm 460*330mm.
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
PW460 (6*15A, 4*300V) is the 3 phase relay test equipment can test all types of protective relays.This relay test kit has in-built output monitoring and recording function and also supports testing kit IEC 61850 IED.Optional accessories include external amplifier,GPS,Circuit Breaker Simulator,Current Booster,etc.
Features
6*15A, 4*300V
Aux DC (0-300V), DC measuring inputs
8 binary inputs, 8 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
411 Electric Testers Suppliers
Short on time? Let Electric Testers sellers contact you.
PW466i (6*20A, 6*150V) is a powerful secondary injection test set with 6-currents and 6-voltages sources.This advanced secondary injection kit is capable of testing differential relay and synchronizing relay. Optional upgrade is available to support the test of IEC61850 relay.
Features
6*20A, 6*150V
Aux DC (0-300V)
8 binary inputs, 4 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on.
Features
8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power
Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently.
Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send.
Can check the GOOSE communication link
SV, GOOSE configure message can be saved and recall repeatedly
With the IEEE1588 synchronization function, deviation of the time is less than ±80ns
With GPS, IRIG-B code synchronization interface
TD series testing equipment consists of control unit and DC high current output unit.TD2000,the DC test equipment outputs 0-2000A with 0.1% high accuracy DC current used in HVDC convertor station and testing DC current transformer characteristics.
Features
Manual and auto test by software
Output DC current waveform by USB port
Multi high current connector for busbar
Easy panel control with LCD display and rotary encoder
T1000 primary injection test set is the model featured with light weight and 2 minutes output time at 1000a. This ideal primary injection test set with lcd display, quick control button and rotating mouse is very easy and convenient to operate.
Features
2 minutes continuous output at 1000a
Flexible control over output, such as manual, ramp, etc
Independent aux dc supply
In-built multi-meter facility
Typical ct testing functions are also included
Weight : 30kg
Application
GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments.
Standards
YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012
Application
GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,.
Technical Indexes
1.Temperature Control:
Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Application
Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.
Features
1: Our own patent technology
2: Embedded system control
3: Touch screen operation, easy to operate
4: TFT LCD display, UI flattening design
5: Dual heat jaws, temperature controlled independently
6: Micro-printer prints mini-report
7: Pressure easy to adjust, heat temperature and time touch screen input.
8: Emergency stop button, safety design to prevent burns
9: Over temperature protection, over pressure protection
10: Silence working
11: DB9 RS232 communication port.
12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data.
Technical Indexes
Heat temperature: Room temperature+6 ~ 300â??
Accuracy: ±0.2 â??
Dell time: 0.1~ 999.9s
Pressure: 0.05 MPa~1.1MPa
Heat jaw surface: 265mm Ã? 12 mm (customized)
Heat jaws: 2, controlled independently
Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide)
Gas source interface: Ф6mm
Outer dimension: 536 mm (L)Ã?335 mm (W)Ã?413 mm (H)
Work noise: 0db
Power supply: AC 220V 50Hz
Net weight: 33kg
Standards
QB/T 2358(ZBY 28004)ã?�ASTM F2029ã?�YBB 00122003
Configuration
Delivery: main unit, micro-printer, footswitch, sample feeding rod.
Optional: Communication cable, DSM system
Application
Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.
Features
1: Our own patent technology
2: Embedded system control
3: Touch screen operation, easy to operate
4: TFT LCD display, UI flattening design
5: Dual heat jaws, temperature controlled independently
6: Micro-printer prints mini-report
7: Pressure easy to adjust, heat temperature and time touch screen input.
8: Emergency stop button, safety design to prevent burns
9: Over temperature protection, over pressure protection
10: Silence working
11: DB9 RS232 communication port.
12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data.
Technical Indexes
Heat temperature: Room temperature+6 ~ 300â??
Accuracy: ±0.2 â??
Dell time: 0.1~ 999.9s
Pressure: 0.05 MPa~1.1MPa
Heat jaw surface: 265mm ? 12 mm (customized)
Heat jaws: 2, controlled independently
Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide)
Gas source interface: Ф6mm
Outer dimension: 536 mm (L)?335 mm (W)?413 mm (H)
Work noise: 0db
Power supply: AC 220V 50Hz
Net weight: 33kg
Standards
QB/T 2358(ZBY 28004)?�ASTM F2029?�YBB 00122003
Configuration
Delivery: main unit, micro-printer, footswitch, sample feeding rod.
Optional: Communication cable, DSM system
Application
OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Application
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Features
Standard Gurley, Low Pressure Gurley, High Pressure Gurley
Sheffield units, Bendtsen units
Interchangeable test heads
Output in seconds, other unit optional
Embedded system, remote service
Touch screen operation
Test data and curve real time display
Built in data query function
Built in micro-printer to print reports
Automatic overload protection.
Highly accurate sensors to ensure the accuracy and repeatability.
Swagelok piping system, to ensure system tightness and long-term stability
Advanced control device, reliable operation and long service life
Standard communication interface, configurable professional computer software
The calibration can be traceable to ensure the measurability of the test data
Support DSM system
Technical indexes
Test Range: 30,60,000 Gurley seconds,Standard,
0.0021,200um/Pa.s,Standard,
300,60,000Gurley seconds,Optional,
0,60,000 Gurley seconds,Optional,
Resolution, 0.1 Gurley seconds
Sample Amount, 1 ,Standard,,3 can be customized.
Differential Pressure,0.01kPa,20kPa,STD,1.22kPa,
Accuracy: 0.01kPa
Test Area: 1.0in2. ,0.25in2, 0.1in2 optional,
Sample Thickness: ,5mm
Test Gas: Air, O2, N2, CO2,Self-provide,
Gas Resource: 0.3MPa,1.0MPa
Interface: Ф6mm
Dimension: 320mm,L,Ã?380mm,D,Ã?410mm,H,
Power Supply: AC 220V 50Hz
Net Wt. 25 kg
Standard
ISO 5636.5,ASTM D726, TAPPI T460,TAPPI T536,TAPPI T538,TAPPI T490
Configuration
Delivery,Mainframe, Test Head (1.0in2), Super Filter, Precision Pressure Regulator.
Optional: Sample Auto Feeder, Calibration Equipment,Test Head(1.0in2), Test Head(0.25in2),Test Head(0.1 in2).
Note: Specifications are subject to change without prior notice.
Application
GTR-7001 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes.
Features
Vacuum differential pressure method
Patent technology
3 specimens test simultaneously and independently
Computer control
One-button test, test automatically through whole process
High accuracy vacuum sensors embedded in
3 Chambers with independent temperature sensor
Test under various RH conditions with Humidity generator (optional)
Environment temperature and humidity sensor inside
Permeability coefficient ,solubility coefficient and diffusion coefficient test
Chambers with water bath temperature control technology
Unit based on embedded system,24bit AD
Multiple test modes optional
Data curves display
Traceable reference film calibration
Supports DSM system (DSM, lab data management system)
Technical Indexes
Test range: 0.01 - 190,000 cm3/m2â?¢24hâ?¢0.1MPa (Standard)
Resolution: 0.001cm3/m2â?¢24hâ?¢0.1MPa
Samples: 3, independent
Vacuum accuracy: 0.1Pa
Temperature range: 5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH (optional)
Humidity accuracy: ±1%RH (optional)
Sample thickness: less 5mm
Sample size: >= 150mm * 94mm
Test area: 48cm2
Test gas: O2, N2, CO2, He, etc
Differential pressure: -0.1MPa - 0.1MPa
Gas interface: Ф8mm
Dimension: 730mm * 510mm * 350mm
Power supply: AC 220V 50Hz
Net wt. : 63kg
Standards
ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003
Configuration
Delivery: Main unit, computer, G-TRANS software, Temperature controller, vacuum pump(BOC Edwards), tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional: Humidity generator, Reference film, vacuum grease, sample cutter, DSM system.
Application
Wvtr-9001 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
Features
Electrolytic sensor method
Patent technology
Film and package test
3 specimens test simultaneously and independently
One-button test, test automatically in whole process
Multiple test modes optional
Data curves display
Computer control
Digital flow adjustment
3 chambers with 3 temperature sensors
Environment temperature and humidity sensor inside
Chambers water bath technology
Unit based on embedded system, 24bit î?-î£ ad
Pressure, ppm water sensor and temperature overload protection
Traceable reference film calibration
Supports dsm system (dsm, lab data management system)
Standard
Iso 15106-3, gb/t 21529, din 53122-2, ybb 00092003
Configuration
Delivery: main unit, computer, w-trans software, temperature controller, tank regulator, pcie card, communication cable, sample cutter, vacuum grease.
Optional: package fixtures, reference film, vacuum grease, sample cutter, dsm system.
This testing machine is according to iec61058.1, iec60884 and iec60669.1 standards to design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test.
Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use, and if there are adhesion phenomena or prolonged closed or disconnected phenomena occur, inspect whether there are excessive wear and other harmful consequences with it. It is the special equipment for switch mechanical life machine and electrical life endurance tester.
Parameters
1.Power supply: ac220v10%/50hz or 110v/60hz
2.Station : stations, 1 and 2 station are used to perform switch test (rocker switches and push button switches can switch test, 3 and 4 station are used to perform the plug and socket testingm, all 4 workstation can work independently )
3.Operation interface: 7-inch color lcd touch screen
4.Drive mode: pneumatic, 58kg/cm2
5.Control systems: plc control
6.Preset times: 0999999s, can be preset
7.Test times: displays the current number of trials
8.The on time: 099.9s, can be preset
9.The off time: 099.9s, can be preset
10:travel time: mechanical adjustment, take the cylinders maximum stroke position
11.Test rate: adjustable valve, about 0.2s / times
12.Atmospheric pressure : 80106kpa
13.Environment temperature:540
14.Relative humidity : ( 2090)%rh
15.Working place: no violent shaking, vibration, electromagnetic interference, no dust,
Non-explosive and corrosive gases, good heat dissipation
16.Dimensions and weight : l*w*h=1180*750*750mm, 105kg
411 Electric Testers Suppliers
Short on time? Let Electric Testers sellers contact you.
