Organic Solvent Residue Tester

Application GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments. Standards YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012 -

Scope Standard: astm d189 Carbon residue of petroleum products tester (conradson method) is based on gb / t268 "determination of carbon residue of petroleum products' design and manufacture. Applies to easily partially decomposed at the time of the atmospheric distillation, residual carbon content is relatively less volatile petroleum products by left after evaporation and pyrolysis of petroleum products in order to provide relatively coke tendency indicators. Features 1, the analyzer consists of a gas burner, a crucible, cover flame body and hob, hood and other components. 2, the instrument design is reasonable, easy to operate. 3, the main components made of stainless steel, beautiful and durable. Technical parameters 1, the work: single hole, 2. Working methods: kang type method, a gas burner

Supplier: Chemicals, Solvents, Hardness Tester, Bandsaw Blades, Iso Propyl Alchohol, N-95 Face Masks, PPE Kits, Hand Sanitizer

The glass-lined equipment is made by coating the high silicon content enamel onto the surface of metal body and then firing them at high temperature ( ~ 900℃ ) in order to achieve a high adhesive strength of the enamel on the steel basic body. The glass-lined equipment, therefore, has high mechanical features and corrosion resistance. Substituting stainless steel and nonferrous metal equipment, the glass-lined equipment is widely used in fine chemical, pharmaceutical, dyestuff, pesticide, metallurgical and food industries. Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180℃. Thermal shock resistance: resistance to sudden cooling 110℃, resistance to sudden heating insulation performance: the enamel surface should be strictly tested at 20kv.

Sunkiss matherm was the inventor of the thermal reactor and the first manufacturer who designed an innovating technology for ir radiation, adapting excellently to the requirements of drying, fusing and polymerizing of paints and varnishes. Sunkiss matherm, inventor of the thermoreactor®, was the first manufacturer to create and perfect infrared radiation technology that is particularly suitable for drying, fusion and polymerization. Today sunkiss matherm designs and builds installations for many industrial manufacturers who are looking for savings in time and space, better product finish, energy savings and more flexible operation. Commercial advantages: Atex ec certification: Ce type examination certification by validation of equipment and protective systems intended for use in potentially explosive atmospheres directive 94/9/ec. Time saving: Drying time is always one third to one eighth of the normal time because of the rapid rise in temperature and acceleration of evaporation, fusion and polymerization processes. Space saving: This saving always results in a more compact and shorter tunnel, which favours installation where space is limited. Quality: Improved finished appearance and paint film hardness occur because of core drying, solvent or water evaporation from inside to outside, and also because of the very quick fusion of powder paint. Freedom from dust: Dust contamination is avoided by rapid drying. Solvent vapor removal: The solvents (vocs) in contact with the thermoreactor® during the drying phase are destroyed by flameless oxidation. Energy savings: The reduction in energy consumption, which can be more than 50 per cent, can be explained by the direct transfer of energy from the thermoreactor® to the organic coatings. Productivity: Faster throughput resulting in minimal numbers of paint sprayed items queing for thermoreactor® treatment. Rapidity: The start-up for a tunnel with a thermoreactor® system is only ten minutes.

High flexible teflon insulated wire RoHS, CCC GB/T19001, ISO9001 Rated temperature: 200oC AC rated voltage: 300V-600V Conductor: Solid or stranded wire (0.014~95mm2 ) of tin-plated, silver or bare copper. Insulator: FEP(F46) Color: Red\blue\white \ yellow \green\brown\black\grey \transparent It is corrosion-resistant and almost impossibly soluble in any organic solvent and it is oil-resistant, less high-frequency loss, moisture-proof and has big insulation resistance. Also, it is incombustible, non-aging and durable. The length of delivery should not be less than 8 meters and the quantity of short delivery should not be more than the quantity of 20% of all delivery. Use Range It is used in air-conditioner, microwave oven, electric products, lighting sets, electric heater, oven, electric factory, various motors and so on.

Electric single core conductor Cable RoHS, CCC GB/T19001, ISO9001 Rated temperature: 250oC AC rated voltage: 300V-600V Conductor: Solid or stranded wire (0.014~95mm2 ) of tin-plated, silver or bare copper. Insulator : PFA Color: Red\blue\white \ yellow \green\brown\black\grey \transparent It is corrosion-resistant and almost impossibly soluble in any organic solvent and it is oil-resistant, less high-frequency loss, moisture-proof and has big insulation resistance. Also, it is incombustible, non-aging and durable. The length of delivery should not be less than 8 meters and the quantity of short delivery should not be more than the quantity of 20% of all delivery. Use Range It is used in air-conditioner, microwave oven, electric products, lighting sets, electric heater, oven, electric factory, various motors and so on.

4-20 mA/0-5v/0-10v Output NH3 ammonia sensor Product Description Our NH3 sensor uses the electrochemical principle to detect the concentration of ammonia (NH3). The reaction is rapid, sensitive, low-power, high-precision, anti-interference, and has excellent repeatability and stability. This product is widely used in the detection of ammonia in industrial, mining and environmental protection. Analog signal output, 4~20mA, 0~5V, 0~10V optional, equipment 10~30V wide voltage supply. The enclosure rating is high and can be adapted to different environmental monitoring. Power supply 10~30V DC output signal 4~20mA0~5V0~10V Power consumption 0~50ppm accuracy (high precision) 0.25W 0~100ppm accuracy (high precision) 0.25W 0~500ppm 1W Operating temperature -20~+50 Working humidity 15%RH~90%RH Pressure range Standard atmospheric pressure ±10% Stability (months) ï¼?10% Response time 150S Zero drift (-20~40C) -3~10ppm (0~100ppm products) Repeatability 10%output value Service life 24 months Precision 0~50ppm accuracy (high precision) ±10%FS 0~100ppm accuracy (high precision) ±10%FS 0~500ppm ±20%FS±10ppm Oxygen content: 18% Resolution 0~50ppm model: 0.01ppm 0~100ppm model: 1ppm 0~500ppmmodel1ppm Detailed Images 1. High-sensitivity gas detection probe, stable signal, accurate measurement of NH3 concentration (PPM), high accuracy. 2.Avariety of measurement ranges, 0~50PPM, 0~100PPM, 0~500PPM. 3.Avariety of analog signal output options: 4~20mA, 0~5V, 0~10V. 4. The product adopts wall-mounted waterproof shell, which is easy to install and has high protection level. . Installation Instructions No output or output error possible reason: 1) The range corresponding error causes the PLC to calculate an error. 2) The wiring method is incorrect or the wiring sequence is wrong. 3) The power supply voltage is incorrect (24V power supply for 0~10V models). 4) The distance between the transmitter and the collector is too long, causing signal disturbance. 5) The PLC collection port is damaged. 6) Equipment damage. Notes 1) The aging test before use is not less than 48 hours; 2) Electrolyte leakage will cause injury, please do not disassemble the sensor at will; 3) The sensor should avoid contact with organic solvents, paints, chemicals, oils and high-concentration gases; 4) The sensor should not be immersed in an oxygen-free environment for a long time, otherwise it will damage the performance of the sensor; 5) It should not be used for a long time in an environment containing corrosive gases, corrosive gases will damage the sensor; 6) It is forbidden to store and use in high concentration alkaline gas for a long time; 7) The air inlet holes must not be blocked or contaminated. Our Services & Strength 1.OEM servie, we can design as your requirements. 2.2 years warranty for our sensors 3.We have CE,FCC,ISO,ROHS certificates. 4.We have sensor in stock, can delivery immediately.