Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Endless transfer belts series products include: a. PBO+KEVLAR temperature resistance: 550, peaking at 650 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm b. KEVLAR Temperature resistance: 480ï¼?peaking at 550 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm c. NOMEX Temperature resistance: 280ï¼?peaking at 370 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm d. POLYESTER Temperature resistance: 180ï¼?peaking at 260 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Multy-ply fabric conveyor belt, chevron conveyor belt, steel cord conveyor belt, corrugated sidewall conveyor belt, bucket elevator conveyor belt, endless conveyor belt, heat, cold, fire, acid, alkali, oil resistant conveyor belt, rough top conveyor belt.
Chain mesh belt brief introduction By general conveyor belt on both sides installs chain and transverse supporting rod and, drive sprocket, mesh belt fixed broadband deformation. Adjust the network with different pitch, can be installed chains with different forms, easy to install network with the accessories, such as baffles, flank. The net surface smooth, carrying heavy pressure and tension, ventilation breathable performance is good, energy saving and environmental protection, net surface clean non-toxic, and easy cleaning, maintenance and the disassembly is very convenient, with chain type network is widely used for frozen food, vegetables, with the exception of the sand cleaning and sterilization, sterilization pre cooking, baking, drying, electronic industry production line. Customer ordering chain network with required data 1, the outer width, length of the chain type mesh belt 2, net belt of the chain of the material model 3, the diameter of the supporting shaft material length of the distance of the branch 4, the wire diameter of the mesh wire winding wire diameter of wire mesh belt material mesh belt pitch 5, the chain mesh belt can take the edge of the baffle
The Great Wall network with horseshoe chain cellular network The Great Wall network with horseshoe chain, plate mesh belt, metal mesh belt, towing, honeycomb mesh belt track A flat metal plate and metal screw rod composed of round wear, mesh belt light weight, mesh gap, smooth surface, smooth operation, will not walk. Do the washing, drying, cooling, conveying line heat treatment. The food bread line, the spiral tower refrigeration machinery in conveying, spraying, the widespread use of Qing Dynasty washing machinery and heavy transport machinery. Is a friction drive for continuous material transport machinery, application of the Great Wall network with the material in the transmission line from the initial feed point to the final discharge point between the formation of a material delivery process. The Great Wall net belt which can transport pieces. The material, also can convey goods. In addition to the pure material handling, matching can also process and production processes of various industrial enterprises in the requirements, the formation of the rhythmic flow transport line. So the the Great Wall network with wide application In modern industrial enterprises, is the automatic device and in the modern automation line the essential important parts. With great wall material of low carbon steel A3, steel 45# and 1Cr13 heat-resisting steel, stainless steel, 304 stainless steel, 1Cr18Ni9Ti stainless steel. 0Cr18Ni14NO2CU2 resistance to heat and acid resistant steel and other. Automatic line of products are widely used in light industry machinery, sterilization machine, silk printing and dyeing, food, power, pharmaceutical, garment processing and other industries the delivery. Procurement of the the Great Wall network with the need to provide data information: 1 mesh width: the total width of the the Great Wall network with the total width. The diameter of the wear axis: connecting the the Great Wall mesh belt mesh diameter of the rod. 2 the length of the rod segment: the distance from the axis distance between the two connecting rods of the the Great Wall mesh belt mesh. 3 inside width: the Great Wall mesh belt mesh back bend. 4 transverse pitch: two mesh back to the curved angle spacing. 5 the Great Wall network with a normal material selection: 201 stainless steel 304 stainless steel, iron, can also be selected according to the specific requirements of the material.
The belts are widely used in curing, electronic circuit board industry solid melting, drying, reflow. Cap of plastic industry drying; food industry for chocolate, biscuits, baked fillets, frozen, dried, the belts can be used to edge chain drive. The belts: also called ladder shaped mesh belt or a net this belt, usually gear transmission belt, has advantages of good air permeability, tensile force uniform, fine workmanship, this belt has flexible rotation, good stability, high temperature resistance, pressure resistance, corrosion resistance, long life and other characteristics; the belts: material mainly adopts 202 stainless steel, 304 stainless steel, stainless steel 1cr18ni9ti special material made by stainless steel, high temperature resistance, corrosion resistance, good air permeability and other special features; the belts: mainly used in printing and dyeing, radio, electronic, food machinery and scientific research units.
Spiral mesh belt Spiral net belt is commonly applied to the frozen food industry, is one of the essential for quick freezing machine accessories, imported computer net belt machine production, the net surface is tough and durable, not easy to deformation, the biggest feature is turning performance. It can realize the 360 degree turn, and smooth operation, root according to user requirements without mesh or on the mesh belt on both sides of the block edge. Pitch: 19.05mm, 25.4mm, 27.25mm, 27.4mm, 30mm, 31.75mm. plus mesh or mesh of different turning radius: rotation radius = 1.7 x network wide, rotating radius = 2.2 x network wide, rotating radius 1 x network wide material: 304 and 316 stainless steel The data required for the spiral mesh belt in order to be made to order 1, mesh belt material. 2, the chain of the chain from the chain of the film is thick, high. 3, the effective transmission width of the mesh belt. 4, the diameter of the supporting shaft. 5, the wire diameter pitch of the mesh belt. 6, the total width of the spiral mesh belt. Flex-link Positive driven belt in 12.7mm and 25.4mm pitch variations .Used IN straight Runing and radius applications ( inside radivs is 2.2*belt width ), Driven via a stamped U shaped link on each edge joined with mesh overlay for very fine or flat product commonly used on cooling or freezing conveyors and spiral towers in the food processing and baking industries
The main frame of the electric roller conveyor is aluminum profile, with high torque and low power consumption, etc., it can control the speed and direction by PLC. Which is especially suitable for the high speed and stable conveying of bracket and carton, etc. Machine features of Electric roller conveyor The conveyor can carry heavy weight. Internal DC 24V motor. Convenient installation and stable performance. Anti-corrosion, wear-proof and high temperature resistance. Provide customized service.
Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn,pin and roller material is 40Cr.High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working.
Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.
Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper. Chain feed width :1200-2600mm Capacity feedï¼?60-600m3/h Motor power:3-55kw
Product introduction: 1.This equipment is placed after production line printer or before and after the equipments of different working Speed as a buffer; 2.PLC control system,Working is stably and reliably; 3.Easy to operate LED touch screen control interface; 4.FIFO(first in first out),LIFO(last in first out)and pass through function optiona; 5.Fast,smooth,accurate retrieval positioning; 6.Memory function,control the order of pcbs pass in and out; 7.Smooth and parallel width adjustment(leadscrew); 8.SMEMA port is compatible; Technical parameters Function This equipment is placed after production line printer or before and after the equipments of different working Speed as a buffer PCB thickness Min0.6mm MAX PCBs capacity 20pcs(0.6mm thickness PCB) Cycling time Approx 10 seconds Transport direction Left to right/right to left(optional) Transport height 900±20mm(or customized) Air pressure 4-6 bar, MAX10L/minute Power supply 100-230V AC(customized) single phase, MAX 250V/A If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,
Product introduction: 1.PLC control system, Working is stably and reliably; 2.Enclosed design ensure the highest security level; 3.Balanced, stable, accurate rotation mode; 4.Easy to operate LED touch screen control interface; 5.Smooth and parallel width adjustment(leadscrew) 6.SMEMA port is compatible; Technical parameters Function This unit is used to change direction in the production line PCB thickness Min0.6mm Cycling time Approx 15 seconds Transport direction Left to right/right to left(optional) Transport height 900±20mm(or customized) Air pressure 4-6 bar, MAX 20L/minute Power supply 100-230V AC(customized) single phase, MAX 300V/A If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,
Product introduction: 1.PLC control system,Working is stably and reliably; 2.Easy to operate LED touch screen control interface; 3.Fast, stable and accurate stepper motor moves; 4.Enclosed design ensure the highest security level; 5.Customized machine length according to customer requirements; 6.Buffer deceleration design more stable, accurate; 7.Smooth and parallel width adjustment(leadscrew); 8.SMEMA port is compatible; If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,
Product introduction: 1.Steel frame, static painted surface; 2.Balance weight design improve the stability; 3.Optional pass/inspection working mode; 4.Smooth and parallel width adjustment(leadscrew); 5.According the customers damand to customize the stoping PCB number; 6.Variable speed control; 7.SMEMA port is compatible; Technical parameters Function This equipment is used for the connection between the line PCB thickness Min0.6mm Transport direction Left to right/right to left(optional) Transport height 900±20mm(or customized) Power supply 100-230V AC(customized) single phase, MAX 100V/A If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,
Product introduction: Our product is made of high-quality material :PBO and kevlar.It is mainly used for aluminum industry.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 500 degrees for a long time.Our factory mastered the most reasonable production process and the best PBO layer thickness and density of the balance point after years of practice and research.We can make sure that we can provide you the best product and the best service. Specifications: Brand:HUATAO material :PBO and kevlar:30%PBO+70%kevlar ,or 20%PBO+80%kevlar color:brown and yellow Work temperature: 600 degrees for a short time(15mins) 500 degree for a long time Length: All size are available thickness :6mm~12mm Maximum internal diameter:168mm Minimum internal diameter:20mm Advantages: 1. Heat resistance up to 600°C; 2. High density with no delaminating or fuzziness; 3. Abrasion resistance with smooth cutting and even surface; 4. Long service life against high quality; 5. Pollution-free for extrusions; 6. Competitive price and good service after sales. 7. Resin treatment.
Product introduction: High temperature felt roller is mainly used for aluminum industry, the main function is to transport,transfer extruded aluminum profile. Our product can protect its surface and improve the quality and grade of aluminum. It is made of 100% kevlar or kevlar &carbon mixture.Its work temperature can up to 500 degrees for a short time (about 15 minutes) and 200 degrees for a long time. Specifications: Brand:HUATAO material :100% kevlar or kevlar&carbon mixture color:yellow and green The color of 100% kevlar is yellow. The color of kevlar&carbon mixture is green. Work temperature: 500 degrees for a short time(15mins) 200 degree for a long time Length: All size are available thickness :6mm~12mm Maximum internal diameter:168mm Minimum internal diameter:20mm Advantages: 1. temperature resistance can up to 500 degrees; 2. High density with no delaminating or fuzziness; 3. Abrasion resistance with smooth cutting and even surface; 4. Long service life against high quality; 5. Pollution-free for extrusions; 6. Competitive price and good service after sales. 7. Resin treatment.
Product introduction: High temperature resistant felt belt is often used in aluminum factory. Our product is made of PBO and Kevlar. It have heat resistance characteristics.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 550 degrees for a long time. Specifications: Brand:HUATAO material :PBO + kevlar + one layer Nomex tension member color:brown and yellow Size:Make-to-order Work temperature:600 degrees for a short time(15mins) 550 degree for a long time Length:900mm-25000mm Width:20mm-1700mm Thickness:5mm-15mm PBO Thickness: 2mm~8mm Advantages: 1. Temperature resistance up to 600°C; 2. High density structure; 3. Abrasion resistance with smooth cutting and even surface; 4. Long service life against high quality; 5. Pollution-free for extrusions; 6. Competitive price and good service after sales.
Product introduction: This product is suitable for third-class and forth-class cooling bed. Our product is made of 100% Nomex and one layer Nomex tension member. It have heat resistance characteristics. Its highest temperature resistance can up to 300 degrees. Specifications: Brand:HUATAO material :100% Nomex + one layer Nomex tension member color: offwhite Size:Make-to-order Highest work temperature:500 degrees Length:1700mm-11000mm Width:20mm-1500mm Advantages: 1.Eco-friendly material 2.Anti-static 3.Good wearability 4. soft and flat surface 5. Small weight, convenient storage 6. Easy to install, everyone can operate 7. The blanket has no joint as a whole and there is no break zone 8. High density structure;
