Lambton machinery counterflow process is the refined technology of exposing processed product to an upward moving stream of ambient airflow. The cooler works on the principal of blowing air through columns of hot & moist pellets, which results in evaporation of moisture from the pellets. For moisture evaporation, heat is taken from the pellets leading to cooling of pellets. The product just entering at the top of the cooling chamber is exposed to the warmest air available within the cooler minimizing temperature shock. The product exiting the bottom of the unit is cooled to within 5-10ípof the ambient air temperature. The product and air have opposite flows the gradual heat transfer greatly enhances the product quality and reduces stressing and fines. To achieve the required cooling effect, pressure and volumetric flow rate of air, length of column and the residence time will play an important role
Counterflow coolers are available in either a rectangle, square or circular cooling chamber design the circular design enables product to be evenly distributed throughout the unit, increasing cooling uniformity. The round design eliminates all poorly filled corners. Most system installations encounter limited space situations while counterflow coolers provide invaluable versatility in system design. Counterflow cooler is in its highly efficient design which produces a uniformly cooled product with a low operating and installation cost compared to other conventional type coolers.
---material and cool air is in reverse direction, so that the pellet can become cool quickly and equally.
---discharge with slide valve so that volume can be adjusted to smooth discharge
---a probe level is installed
---the temperature of cooled material is under 37.4-41
---efficient, trouble-free, and affordable cooling
---improved moisture control and low-shock, tempered cooling.
Lambton drag conveyor is widely used in horizontal and inclined drag conveying of different materials. It includes:
--horizontal drag conveyor
--inclined drag conveyor
--self-cleaning drag
--conveyor
Lambton ensures the high quality and low cost of horizontal and inclined conveying machines whose capacity can be up to 1500t/h.
Head and boot features:
--high duty roller bearing
--screw tension structure
--big cleaning door
--high duty wearable dust seals
--spare liner for bottom and side plate
Trunk features:
--pre-assembled section: long distance, high standard
--trolley of super antifriction material
--spare liner for bottom and side plate
Chain and scraper:
--high duty roller chain
--super antifriction scraper ensures smooth running
Uses cema standard, cad, cam and cnc technology, offering special conveyor design for different industries. Lambton belt conveyor is widely used in grain, food, seed, beer, beverage, pesticide, tailings, chemical engineering, coal, port and other industries. Its capacity can be up to 1500t (wheat)/h or 100t (malt)/h.
Drum belt conveyor features:
--advanced technology in drum design ensures smooth running and long life
--many kinds of drum combinations for different material
--conveyors with large capacity and length use large drum, cushion drum and regulating drum, ensuring safe running. It is widely used in industries like grain storage, port, coal mine, cement and electric power
--can meet requirement of no breakage and low residue level, applicable to seed, grain and oil industries
--optional conveyor structures are the complete close, semi-close and open style. Portable and fixed type are available for both level and inclined conveyor
--packaged type easy erection
Air bed belt conveyor features:
-- international advanced drum, air chamber design and manufacture skills ensure safe and smooth running
--stiffened belt
--specially suitable for outdoor work, no additional safe guard device is needed
--packaged type easy erection
--portable and fixed type are both available with perfect environment protection featureíííí
Bucket elevator is used to transfer the material from ground level to certain height. It consists of a cotton or rubber belt running on one drive pulley at the top and the other one is driven pulley, which is at the bottom inside a fabricated casing.
The model is a floor-to-floor incline or decline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline or decline to horizontal plane.
Detailed product description:
Incline belt conveyor of china
Bed - stainless steel galvanized carbon steel aluminum section
Belt widths: 50-1200mm
End drive (standard)
Driving mode motor reducer
Adjustable floor supports available
Reversible (with center drive).
Belt widths: 50-1200mm
End drive (standard)
Driving mode motor reducer
Adjustable floor supports available
Reversible (with center drive).
7118 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
Belt conveyer is a kind of machine that to transfer the material continuously. The belt works under the effect of frictional force. It is not only the components to transfer the material, but also the components to transfer the force.
The belt conveyer is advanced and simple in structure, easy to maintain. Its transfer capacity is high, transfer distance is long. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it Is a very important component of nonstandard machinery.
We can Provide the following Productions:
General Conveyor Mechanism
Horizontal Curve Conveyor Mechanism
Mobile Conveyor Mechanism
Pipe Belt Conveyor Mechanism
Screw Conveyor Mechanism
Conveyor Rubber Belt
General Steel Cord Conveyor Belt
Horizontal Curve Conveyor Mechanism
LK18 series cam master controller is suitable for the electric transmission devices of 50hz 380v ac and 220v dc, and used for the remote control of control station by changing the control circuit.
1) The separable design for hopper from main machine,safe and convenient
2) Stainless steel hopper,light-weighted,durable,easy for cleaning
3) Overload protection device on motor
4) Computer control,easy for operation.
5) Independent filter,convenient for cleaning accumulated dust
6) Noise-free design
7) Auto-alarming buzzer protection device for material shortage
Hsz-hand chain hoist series is a manual lifting which is simple to use, a wide range of usage, and is portable, it can be used in factories, mines, agriculture, electricity, construction, shipside, docks, storage for machines be installed, the lifting of the goods, such as loading and unloading of vehicles, particularly applicable to the operations in the open air and no power.
Digidale volumetric screw feeder working with the principle of mechanical fluidisation and guarantees the problem free discharge in continuous as well as precious batch operation of granular and powdery product such as flour, milk powder, salt, starch, flakes, coal, pallets, bentonite, washing powder and agglomerates etc.
The volumetric screw feeder has only five moving parts, drive, coupling, screw and two bearings and it is virtually maintenance free. An agitator/conditioner screw available in all feeders fills the screw completely resulting in desired feed accuracies.
Silent running minimal noise pollution
Efficient enclosure for dust/security/contamination/spillage/weather
Minimal degredation of materials due to no movement of transported products
Steeper incline possible for most materials
Higher speeds possible
Cost saving in outdoor applications
Reduced structural and civil costs
Power consumption reduced
Neat profile
Minimised maintenance
Protection of personel from moving parts
Increased belt life
Air generated from a low pressure centrifugal fan
Air can be conditioned to suit the product
Available in mild steel, 3cr 12, 304/316 ss and aliminium
Suitable to convey most products
Ease of erection
22 years of proven design, success and reliability
Reduction in support tressles, unsupported span of 12 metres and up to 36 metres in certain applications
After sales service, on site maintenance contract available
Well suited for use as a reversable or a shuttle conveyor
Ideal for conveying precious materials (security)
The aerobelt is an 'air cushion belt conveyor'. In this system the belt is carried on a film of air. Air is blown into the plenum chamber through sections by a small fan. One fan is sufficient for over a hundred metres of belt conveyor.
Duct-Baling-Press TypeBP 4000 V / 19,5
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier.
Technical Data:
Drive:..................................19,5 kW/400 V/50 Hz
Pressure:...............................400 kN/m¦
Volume/stroke:.....................1,0 m¦
Cycle time:............................28 sec
Feed opening:......................1350x820 mm
Bale dimensions:..................800 x 900 x 600
..............................................1.200 mm
No of tightening wires:..........4
Press length:.........................5750 mm
Press width:..........................2050 mm
Press height with funnel:......1925 mm
press height complete:.........2360 mm
Weight:..................................6100 kg
FAKT BP 5000
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier.
Technical Data:
Drive:...................................35 kW/400 V/50 Hz
Pressure:..............................600 kN/m¦
Volume/stroke:....................1,3 m¦
Cycle time:...........................19 sec
Feed opening:......................1350 x 1160 mm
Bale dimensions:.................1100x750x600
.............................................1.200 mm
No of tightening wires:..........4
Press length:.........................6850 mm
Press width:..........................2650 mm
Press height with funnel:.....2150 mm
press height complete:........3700 mm
Weight:..................................14600 kg
Basic equipment
- Touchpanel
- photocell control
- bale longimetry
- fully automatic three-sided duct cross sectional adjustment device
- free pitching device
- fully automatic binding
- 4 pieces wire coil stands large
- 4 pieces wire bags for 40 kgs spools
- electric control ready to plug in (SPS Siemens)
engineering und documentation
space assignment plan
plans of electric control
operation manual
security instructions
SBP 200
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................200 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:.....................1200x700 mm
Bale dimensions:................1200x700x500
..........................................up to 800 mm
weight of bale:.....................50 up to 200 kg
press length:.......................1990 mm
press width:........................1360 mm
press depth:........................1170 mm
weight.................................1300 kg
SBP 100
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................100 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:......................600x600 mm
Bale dimensions:.................500x700x500.- 900 mm
weight of bale:.....................50 up to 80 kg
press length:.......................1120 mm
press width:.........................830 mm
press height:.......................2000 mm
weight.................................980 kg
electric control ready to plug in
7118 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
