Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Roller covers series products include:
a. PBO KEVLAR Felt Roller Covers
Temperature resistance: continual 550, peaking at 650
Minimal diameter:33-230mm
Length: Any length
Thickness: 5-12mm
b. KEVLAR roller covers
Temperature resistance: continual 480, peaking at 550
Minimal diameter:33-230mm
Length: Any length
Thickness: 5-12mm
c. NOMEX roller covers
Temperature resistance: continual 280, peaking at 370
Minimal diameter: 33-230mm
Length: Any length
Thickness: 5-12mm
d. POLYESTER
Temperature resistance: continual 180, peaking at 260
Minimal diameter: 33-230mm
Length: Any length
Thickness: 5-12mm
The Best Replacement of Traditional Woven Belt
Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below:
A. High speed, high wear resistance(more than 350m/min)
B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard.
C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets.
D. Normal service life is more than 40 million extension meters.
E. There is no significant geometry change of the belt during the whole production process.
THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER
No. 2006-1T-005
No. Test items Unit Standard requirements Test results Conclusion
1 Performance / Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Qualified
2 Size deviation(width) mm ±10 -3 Qualified
3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified
4 Mass deviation per unit area % ±3.0 2.3 Qualified
5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified
6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified
7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified
8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified
9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified
10 permeability cm³/
(cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified
NOTE: Sample thickness: 10mm
The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard.
The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results.
It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Chain mesh belt
brief introduction
By general conveyor belt on both sides installs chain and transverse supporting rod and, drive sprocket, mesh belt fixed broadband deformation. Adjust the network with different pitch, can be installed chains with different forms, easy to install network with the accessories, such as baffles, flank. The net surface smooth, carrying heavy pressure and tension, ventilation breathable performance is good, energy saving and environmental protection, net surface clean non-toxic, and easy cleaning, maintenance and the disassembly is very convenient, with chain type network is widely used for frozen food, vegetables, with the exception of the sand cleaning and sterilization, sterilization pre cooking, baking, drying, electronic industry production line.
Customer ordering chain network with required data
1, the outer width, length of the chain type mesh belt
2, net belt of the chain of the material model
3, the diameter of the supporting shaft material length of the distance of the branch
4, the wire diameter of the mesh wire winding wire diameter of wire mesh belt material mesh belt pitch
5, the chain mesh belt can take the edge of the baffle
7140 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
The Great Wall network with horseshoe chain cellular network
The Great Wall network with horseshoe chain, plate mesh belt, metal mesh belt, towing, honeycomb mesh belt track
A flat metal plate and metal screw rod composed of round wear, mesh belt light weight, mesh gap, smooth surface, smooth operation, will not walk. Do the washing, drying, cooling, conveying line heat treatment. The food bread line, the spiral tower refrigeration machinery in conveying, spraying, the widespread use of Qing Dynasty washing machinery and heavy transport machinery. Is a friction drive for continuous material transport machinery, application of the Great Wall network with the material in the transmission line from the initial feed point to the final discharge point between the formation of a material delivery process. The Great Wall net belt which can transport pieces. The material, also can convey goods. In addition to the pure material handling, matching can also process and production processes of various industrial enterprises in the requirements, the formation of the rhythmic flow transport line. So the the Great Wall network with wide application In modern industrial enterprises, is the automatic device and in the modern automation line the essential important parts. With great wall material of low carbon steel A3, steel 45# and 1Cr13 heat-resisting steel, stainless steel, 304 stainless steel, 1Cr18Ni9Ti stainless steel. 0Cr18Ni14NO2CU2 resistance to heat and acid resistant steel and other. Automatic line of products are widely used in light industry machinery, sterilization machine, silk printing and dyeing, food, power, pharmaceutical, garment processing and other industries the delivery.
Procurement of the the Great Wall network with the need to provide data information:
1 mesh width: the total width of the the Great Wall network with the total width. The diameter of the wear axis: connecting the the Great Wall mesh belt mesh diameter of the rod.
2 the length of the rod segment: the distance from the axis distance between the two connecting rods of the the Great Wall mesh belt mesh.
3 inside width: the Great Wall mesh belt mesh back bend.
4 transverse pitch: two mesh back to the curved angle spacing.
5 the Great Wall network with a normal material selection: 201 stainless steel 304 stainless steel, iron, can also be selected according to the specific requirements of the material.
The belts are widely used in curing, electronic circuit board industry solid melting, drying, reflow. Cap of plastic industry drying; food industry for chocolate, biscuits, baked fillets, frozen, dried, the belts can be used to edge chain drive. The belts: also called ladder shaped mesh belt or a net this belt, usually gear transmission belt, has advantages of good air permeability, tensile force uniform, fine workmanship, this belt has flexible rotation, good stability, high temperature resistance, pressure resistance, corrosion resistance, long life and other characteristics; the belts: material mainly adopts 202 stainless steel, 304 stainless steel, stainless steel 1cr18ni9ti special material made by stainless steel, high temperature resistance, corrosion resistance, good air permeability and other special features; the belts: mainly used in printing and dyeing, radio, electronic, food machinery and scientific research units.
Spiral mesh belt
Spiral net belt is commonly applied to the frozen food industry, is one of the essential for quick freezing machine accessories, imported computer net belt machine production, the net surface is tough and durable, not easy to deformation, the biggest feature is turning performance. It can realize the 360 degree turn, and smooth operation, root according to user requirements without mesh or on the mesh belt on both sides of the block edge. Pitch: 19.05mm, 25.4mm, 27.25mm, 27.4mm, 30mm, 31.75mm. plus mesh or mesh of different turning radius: rotation radius = 1.7 x network wide, rotating radius = 2.2 x network wide, rotating radius 1 x network wide material: 304 and 316 stainless steel
The data required for the spiral mesh belt in order to be made to order
1, mesh belt material.
2, the chain of the chain from the chain of the film is thick, high.
3, the effective transmission width of the mesh belt.
4, the diameter of the supporting shaft.
5, the wire diameter pitch of the mesh belt.
6, the total width of the spiral mesh belt.
Flex-link
Positive driven belt in 12.7mm and 25.4mm pitch variations .Used IN straight Runing and radius applications ( inside radivs is 2.2*belt width ), Driven via a stamped U shaped link on each edge joined with mesh overlay for very fine or flat product commonly used on cooling or freezing conveyors and spiral towers in the food processing and baking industries
The main frame of the electric roller conveyor is aluminum profile, with high torque and low power consumption, etc., it can control the speed and direction by PLC. Which is especially suitable for the high speed and stable conveying of bracket and carton, etc.
Machine features of Electric roller conveyor
The conveyor can carry heavy weight.
Internal DC 24V motor.
Convenient installation and stable performance.
Anti-corrosion, wear-proof and high temperature resistance.
Provide customized service.
Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn,pin and roller material is 40Cr.High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working.
Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.
Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.
Chain feed width :1200-2600mm
Capacity feedï¼?60-600m3/h
Motor power:3-55kw
Product introduction:
Our product is made of high-quality material :PBO and kevlar.It is mainly used for aluminum industry.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 500 degrees for a long time.Our factory mastered the most reasonable production process and the best PBO layer thickness and density of the balance point after years of practice and research.We can make sure that we can provide you the best product and the best service.
Specifications:
Brand:HUATAO
material :PBO and kevlar:30%PBO+70%kevlar ,or 20%PBO+80%kevlar
color:brown and yellow
Work temperature: 600 degrees for a short time(15mins)
500 degree for a long time
Length: All size are available
thickness :6mm~12mm
Maximum internal diameter:168mm
Minimum internal diameter:20mm
Advantages:
1. Heat resistance up to 600°C;
2. High density with no delaminating or fuzziness;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.
7. Resin treatment.
Product introduction:
High temperature felt roller is mainly used for aluminum industry, the main function is to transport,transfer extruded aluminum profile. Our product can protect its surface and improve the quality and grade of aluminum. It is made of 100% kevlar or kevlar &carbon mixture.Its work temperature can up to 500 degrees for a short time (about 15 minutes) and 200 degrees for a long time.
Specifications:
Brand:HUATAO
material :100% kevlar or kevlar&carbon mixture
color:yellow and green
The color of 100% kevlar is y ellow. The color of kevlar&carbon mixture is green.
Work temperature: 500 degrees for a short time(15mins)
200 degree for a long time
Length: All size are available
thickness :6mm~12mm
Maximum internal diameter:168mm
Minimum internal diameter:20mm
Advantages:
1. temperature resistance can up to 500 degrees;
2. High density with no delaminating or fuzziness;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.
7. Resin treatment.
Product introduction:
High temperature resistant felt belt is often used in aluminum factory. Our product is made of PBO and Kevlar. It have heat resistance characteristics.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 550 degrees for a long time.
Specifications:
Brand:HUATAO
material :PBO + kevlar + one layer Nomex tension member
color:brown and yellow
Size:Make-to-order
Work temperature:600 degrees for a short time(15mins)
550 degree for a long time
Length:900mm-25000mm
Width:20mm-1700mm
Thickness:5mm-15mm
PBO Thickness: 2mm~8mm
Advantages:
1. Temperature resistance up to 600°C;
2. High density structure;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.
Product introduction:
This product is suitable for third-class and forth-class cooling bed. Our product is made of 100% Nomex and one layer Nomex tension member. It have heat resistance characteristics. Its highest temperature resistance can up to 300 degrees.
Specifications:
Brand:HUATAO
material :100% Nomex + one layer Nomex tension member
color: offwhite
Size:Make-to-order
Highest work temperature:500 degrees
Length:1700mm-11000mm
Width:20mm-1500mm
Advantages:
1.Eco-friendly material
2.Anti-static
3.Good wearability
4. soft and flat surface
5. Small weight, convenient storage
6. Easy to install, everyone can operate
7. The blanket has no joint as a whole and there is no break zone
8. High density structure;
7140 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
