we manufacture and supply all products related to conveyor systems.
This is a conveying solution to load the trucks. This is used in go downs and industries to load the trucks with less efforts and less man force.
Used for Loading and unloading conveyor
The Belt conveyor is highly custom-designed for different conditions. It can be used for bag transportation as well as grains and seeds. The belt materials can be rought rubber, food-grade belt The belt can also be covered for outside usage.
Description: Casing Scraper is ideal for the removal of mud, cement, bullets, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing. Maintaining a clean casing I.D. is important when operating drilling, fishing, or wireline tools.
Idlor and bracket which has been used in Conveyor belt
Steel Cord Conveyor Belt The belt core, comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber with the upper side and lower side covered with rubber layer. Widely used in coal, mine, port, metallurgy, electric power, chemical industry for high strength, long distance and heavy load materials conveying. According to cover character, steel cord belt include normal grade use, flame resistant, cold resistant, abrasion resistant, heat resistant, acid-alkali resistant, oil resistant, etc. High tensile strength, long service life, short elongation under service, groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed.
Why You Need A Self-aligning Carrying Idlers? Conveyor belt is the most expensive part of a conveyor system, Making sure the belt is fully functional and not damaged is very important. Associated with the conveying of bulk materials, a misaligned conveyor belt may cause many potential risks and problems, include but not limited to material spillage, shorter life of conveyor belt and conveyor structures. Our self-aliging carrying idlers can keep your conveyor belt stay on the correct tracks, greatly reduced the possibility of a sever damage to belts.
High Density Polyethylene (HDPE) Roller HDPE is a high density polyethylene, which is an environmental chemical that composed of carbon and hydrogen, only carbon dioxide and hydrogen oxide are produced after burned. It wont contain and toxic substances and heavy metals and will not cause any pollution to the environment.
Maximum Noise Absorption, Wear Resistant, and Friendly to Belt Impact roller is installed below the drop material section of the conveyor to reduce the impact of the falling material on the conveyor belt to extend the service life of the conveyor belt. BuMtesD impact roller is specially suitable for mining application, which is an effective way to reduce a sudden and large load capacity, friendly to the rollers under the impacting zone.
The conveyor belt is a rubber, fiber and metal composite products or plastic and fabric composite products used for carrying and transferring materials in belt conveyor. The conveyor belt is widely used in concrete, coking, metallurgy, chemical, steel, power, coal mine, terminal ports and other industries. Classified as per structure materials: common cotton canvas conveyor belt, nylon conveyor belt, steel cord conveyor belt, PVC solid woven conveyor belt, PVG solid woven conveyor belt, corrugated sidewall conveyor belt, etc.
Brief description The equipment has the characteristics of low speed, high conveying efficiency, step-less speed regulation, low energy consumption and so on. It can ensure that the material is conveyed to paste pump at a certain pressure. Application This equipment is based on a bi-axial spiral rectangular structure and is widely used in the treatment of paste materials such as slime, sludge, calcium carbide sludge, printing and dyeing sludge, etc. It is a part of the paste material pumping system. After stirring and conveying, the materials are conveyed to the KOS series paste pump through the bottom discharge port under the stirring of the twin-shaft coupled spiral blades. Effectively solve the problems of material compaction and uneven mixing. It greatly improves the transfer efficiency of paste and viscous materials, and reduces the unit time cost.
Conveyor Belt from Mining company. Not Steel only textile.
Parameter 1.Model:MTW/MTT/MTP/MTS/MTI/MTM/MTH 2.Drive method:independent stepper motor 3.Lifting method:electromagnetic lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 30mm non-working state(small and equal 30mm working state) 6.Support maximum speed:6000rmp/min 7.Voltage/power:110-240/150w 8.Applicable models:sigle and double sewing machine, herringbone machine,stretch sewing machine,synochronous machine,burried machine,overlock sewing machine(limited to MTH) Product advantage 1.The combination of digital puller and conveyor belt, the efficiency is increased by more than 300% compared with traditional sewing machine 2.Synchronous digital puller with automatic conveyor belt with sewing machine,can automatically rewind,improve the edge efficiency and ensure the quality of the hemming 3.Workers are easy to operate,fast-handed,and solve the difficulties of factory recruitment problems 4.Standard servo motor and drive, automation conveyor belt transmission force,accurate data transmission 5.Professional-grade autonous control system,an electronically controlled direct-synchronized drag tug and conveyor belt, stable and reliable
A screw conveyor or feeder is a mechanism that uses a rotating helical screw blades, called Flight of Screw, usually within a Pipe, to convey granular materials. They are used in many bulk handling systems.
Technical parameters Model Baiting power (kw) Shoving power (kw) Feeding diameter (mm) Baiting quantity (kg/h) Case content (kg) Case dimension (mm) Weight (kg) DTC-600 0.75 0.75 76 600 80 650x650x800 80 DTC-1000 1.5 0.75 102 1000-3000 150 900x850x860 150 DTC-2000 1.5 0.75 120 2000 200 1200x800x800 200 DTC-3000 1.5 0.75 140 3000 250 1600x800x800 300
Conveying the finished-packet up. Equip with packaging equipments. Speed (adjustable) 25m/min Height of the lowest point 60mm Loading height(vertical) 850mm Belt Width 250mm Belt Length 1470mm Power AC 220V 60W Package Size 1560x430x350mm 1100x420x800mm Weight 62kg
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Endless transfer belts series products include: a. PBO+KEVLAR temperature resistance: 550, peaking at 650 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm b. KEVLAR Temperature resistance: 480ï¼?peaking at 550 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm c. NOMEX Temperature resistance: 280ï¼?peaking at 370 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm d. POLYESTER Temperature resistance: 180ï¼?peaking at 260 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
