Duct-Baling-Press TypeBP 4000 V / 19,5
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier.
Technical Data:
Drive:..................................19,5 kW/400 V/50 Hz
Pressure:...............................400 kN/m¦
Volume/stroke:.....................1,0 m¦
Cycle time:............................28 sec
Feed opening:......................1350x820 mm
Bale dimensions:..................800 x 900 x 600
..............................................1.200 mm
No of tightening wires:..........4
Press length:.........................5750 mm
Press width:..........................2050 mm
Press height with funnel:......1925 mm
press height complete:.........2360 mm
Weight:..................................6100 kg
FAKT BP 5000
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier.
Technical Data:
Drive:...................................35 kW/400 V/50 Hz
Pressure:..............................600 kN/m¦
Volume/stroke:....................1,3 m¦
Cycle time:...........................19 sec
Feed opening:......................1350 x 1160 mm
Bale dimensions:.................1100x750x600
.............................................1.200 mm
No of tightening wires:..........4
Press length:.........................6850 mm
Press width:..........................2650 mm
Press height with funnel:.....2150 mm
press height complete:........3700 mm
Weight:..................................14600 kg
Basic equipment
- Touchpanel
- photocell control
- bale longimetry
- fully automatic three-sided duct cross sectional adjustment device
- free pitching device
- fully automatic binding
- 4 pieces wire coil stands large
- 4 pieces wire bags for 40 kgs spools
- electric control ready to plug in (SPS Siemens)
engineering und documentation
space assignment plan
plans of electric control
operation manual
security instructions
7102 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
SBP 200
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................200 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:.....................1200x700 mm
Bale dimensions:................1200x700x500
..........................................up to 800 mm
weight of bale:.....................50 up to 200 kg
press length:.......................1990 mm
press width:........................1360 mm
press depth:........................1170 mm
weight.................................1300 kg
SBP 100
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................100 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:......................600x600 mm
Bale dimensions:.................500x700x500.- 900 mm
weight of bale:.....................50 up to 80 kg
press length:.......................1120 mm
press width:.........................830 mm
press height:.......................2000 mm
weight.................................980 kg
Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue resistance. Conveyor belts with nylon canvas inside have the characteristics of thin belt body, high tensile strength, good shock resistance, good troughability, high adhesion between plies, splendid flexibility and long working life. Nylon conveyor belts are suitable for medium, long-distance and heavy-load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports and etc.
For the excellent and special frame, v-belt bears the features of heat resistance, oil resistance, long-life and so on. For the power, speed, long life, small distortion and occupation. Is available, the v-belts are widely used in electromotor and internal- combustion engine and power transmission of equipment.
Cotton canvas is woven by cotton fibers both in warp and in weft, its elongation is relatively low. It is good in mechanical fastening and adhesion with rubber. Converyor belt has relatively small distortion under high temperature conditions. It is suitable for shot-distance and light-load transportation of materials.
Polyster cotton conveyor belt is the up graded product of cotton conveyer belt, and its tension resistant body is woven by polyester cotton fibers in warp and cotton fibers in weft. Its comprehensive physical and mechanical characteristics are obviously better than those of cotton conveyor belt, especially the belt body is thinner and lighter, the belt had better shock tesistance and thus it has better performance and can reduce energy and material consumpution for users. It is the idea selection for medium, short-distance and medium-load transporation of matetials.
Fabric specs: cotton: cc-56
Polyester cotton: t. C-56
Belt width(mm): 300~2600
1) Widely used in construction, mining, metallurgy, chemistry and food industries, as well as power plant and ports
2) Light weight and high strength
3) Acid, alkali, heat, humidity and impact resistant
4) Good trough ability
This belt conveyer series has a feature of large capacity, simplified construction, easy maintenance, standardized components. It is widely used in mining, metallurgy industry to transport both of materials and end products
This series of product is vibrated by the circling motion and the amplitude strength can be adjusted.It has a long screening production line and several layers. The vibrating equipment is used in separating the stuff. It is composed of main frame, screen web, electric motor, eccentric bock, rub spring, coupler and so on. We will offer you suitable type according to your requirements. Features simple and dependable eccentric type system, high screening capacity, high durability, no transmission of screen panels ready changing of screen plates rigid and vibrating resistance screen body.
Description: made by top quality material, through advanced producing process and technology to be well-guarantee of high quality products
Performance: excellent attrition resistance, erosion resistance, oil resistance, strong anti crack and nice flexibility etc.
Specification: dia.2mm20mm(a, b, c section)
Hardness: shore 15ashore 100a
Usage: industial transmission and driving sysytem
Materical:stainless steel lwire, medium or low
Carbon steel wire, galvanized iron mesh, nickl-
Chromium wire, iron-chromium-alumium wire, polyester fiber, etc.
Weaving and features:common weaving, stengthened weaving, sectional common weaving, etc.
Application:wire mesh conveyer belt widely used in petroleum, metallurgy, food machinery, medicine,
Lass, circuit panel, etc.
We are manufacturing diesel forklift fd series for different capacities from 1.5t to 42.0t. The choice of engine have domestic490, weichai4105, chaochai6102, imported engine of isuze, nissan, perkins.
The conveyors consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transfer lines.
The belt conveyors produced by sjlc can be operated in the temperature situation ranging from -20¦ to 40¦. The temperature of transferred material by this belt conveyor should be lower than 50¦.
