Conveyor components
Such as brackets, clamp, hinge, handle, cross block, rollers, and so on
72/06LL sprocket assembly is one of the main parts of the transmission department of SZZ764/200 transfer machine. The sprocket assembly of the head is similar to the structure of the tail, which can be assembled and disassembled as a whole. The sprocket assembly is driven by the scraper chain. The sprocket assembly can be turned for a period of time to allow even wear on both sides of the sprocket teeth. Szz764/200 transfer machine head and tail sprocket is the same size, mainly by end cover, sprocket shaft, sprocket, floating seal, bearing and so on. The sprocket is forged as a whole with 7 teeth, the tooth shape is machined and the tooth surface is quenched. The inner holes at both ends are involute splines, and the power is transferred to the sprocket through the output shaft of the reducer, so that the sprocket drives the scraper to run. The sprocket can be disassembled as a whole without disassembling the transmission device for easy maintenance. Henan Shuangzhi can be customized new and restored sprocket components, if you need more information, welcome to visit the factory.
Sprocket components and scraper chain as the important transmission configuration of scraper conveyor, if there is a fault, it may affect the normal operation of underground coal mining work. So how do you deal with such situations? The sprocket components sometimes has the phenomenon of high temperature in the operation process, the cause may be the insufficient lubricating oil, or the damage of bearing and sprocket may cause the aggravation of friction, which makes the temperature rise. Then the solution is to oil the sprocket assembly, so that the amount of oil to the specified requirements, or replace the worn bearing, sprocket body to make a new replacement. The scraper chain has the condition of jumping teeth at the sprocket assembly, which is caused by many factors, such as too loose scraper chain, twisted chain segment, unequal length or elongation of double-strand chain or different number of rings, as well as the influence of excessive scraper deformation. The correct treatment method is to adjust it: re-tensioning the scraper chain, re-install the twisted chain segment correctly, check the scraper chain length and elongation if unqualified, it should be adjusted and replaced, and must use the odd ring chain, and is to replace the seriously deformed scraper. Inspect the daily maintenance of sprocket assembly and chain of scraper conveyer according to different conditions, deal with and solve the faults in time, reduce the influence of associated problems. Henan Shuangzhi production scraper transfer machine parts, crusher and reducer parts, etc. Welcome new and old customers to visit the factory.
TDY/BYD/DTY/TM Series Drum Motor/ Motorized Drum/ Motorized Pulley Application: Bulk Material Handling Belt Conveyor Application Environment: Quarry, Cement plant, Coal mining, Port, Steel plant..... Conveying Good : Coal,Stone,Sand,Iron ore The drum motor is one of the ideal driving equipment for belt conveyor. It perfectly combines the motor, gearbox and drive pulley. Products Features: 1. Simple design and installation Selecting an drum motor only needs to know the four parameters of diameter, velocity, power and belt width. Unlike the combination of gearbox and drive pulley, you must choose gearbox series, speed ratio, and drive pulley model, as well as coupling series and model.The installation of the drum motor does not require bracket of gearbox and motor, also don t need to adjust the concentricity of the equipment. 2. High efficiency The transmission efficiency of the drum motor is 3% -5% higher than that of the gearbox + transmission drum combination. 3. Save space The motor and reduce equipment are installed in the drum body to achieve maximum space savings. Very suitable for places with small spaces, such as tunnels 4. Low environmental requirements The drum motor is suitable for various harsh environments, such as high altitude, low temperature, high humidity , etc. 5. Excellent reduction gear Hard gear surface, Reducer structure is similar to Rulmca; It adopts the fixed shaft reducer structure when power is less than 18.5KW; It adopts the planetary reducer structure the power is greater than 18.5KW. 6. Functions such as backstop, brake, speed control, and explosion protection can be added according to actual needs
iameter: 50-219mm. Length: 150-3500mm. Lifetime: At least 30,000 hours. Type conveyor: DTII, DTII (A),TD75. Minimum ordered quantity: 5 pcs. Certification: ISO 9001:2000 etc. Port of loading: Tianjin port Payment terms: LC,TT,Western Union. standard wooden box or as per requested
Diameter: 50-219mm. Length: 150-3500mm. Lifetime: at least 30, 000 hours. Type conveyor: dtii, dtii (a), td75. Minimum ordered quantity: 5 pcs. Certification: iso 9001:2000 etc. Port of loading: tianjin port Payment terms: lc, tt, western union. Standard wooden box or as per requested
Supplier: Conveyor belt and punched rubber screen
Supplier: Mild steel conveyor rollers, impact , carry forward, returnable drum rollers.
Buyer: Ms tubes
ith an impressive growth record in this highly competitive industry, we are providing a qualitative range of KIC Belt Conveyor Roller. Belt Conveyor Roller which forms a continuous top and is supported by large chain rollers. Roller is ideal for conveying and/or assembling large heavy products, such as automobiles, heavy trucks, earth moving equipment, steel coils, commercial air conditioners, snowmobiles, ATV's, motorcycles, or for the assembly of engines, brakes, axles, transmissions, compressors and other components. Features: Highly durable Precisely designed Excellent strength
Plastics sprocket These products supply power to chains and connection with the parts of conveyor system.They are low friction, low maintenance cost , endurable and high efficiency, competitive prices.
