Introduction:
The HDMI Extender over ONE CAT5E/CAT6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT5E/CAT6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Extender and receiver, over ONE CAT5E/CAT6 extender is your substantial HDMI extender tool.
Features:
HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.
* Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
* Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away.
* When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is 50 meters.
* Supports XVYCC
Specification:
Frequency Bandwidth : 2.25Gbps (single link)
HDMI Transmitter Input/Output Ports: 2 x HDMI Female port/1 x CAT5E/CAT6
HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT5E/CAT6
Power Supply: 5V/1A DC
ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge)
Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Chassis Material: Aluminum
Operating Temperature: 0C ~ 40C / 32F ~ 104F
Storage Temperature: -20C ~ 60C / -4F ~ 140F
Relative Humidity: 20~90% RH (non-condensing)
Operation Controls and Functions:
1. HDMI Extender Transmitter
Front Panel
1) HDMI1:HDMI1 Input port.
2) SW: Switch the HDMI1 and HDMI2 input port.
3) HDMI2:HDMI2 Input port.
Rear Panel:
1) Power: Plug the 5VDC power supply into the unit
and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on, the
Indicator will be light.
3) CAT5E/CAT6 OUT: Connect the CAT5E/CAT6
output of the transmitter with the CAT5E/CAT6 input
of the HDMI over single CAT5E/CAT6 receiver.
2. HDMI Extender Receiver
Front Panel
1) HDMI Out: HDMI output port.
2) LED indicator: When the HDMI input signal is locked,
the indicator will be light.
Rear Panel:
1) Power: Plug the 5VDC power supply into
the unit and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on,
the indicator will be light.
3) CAT5E/CAT6 Input: Connect the CAT5E/CAT6 Input of the Receiver with the CAT5E/CAT6 output of the HDMI over single CAT5E/CAT6 Transmitter.
Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor.
Features:
* Video and audio in full digital HDMI format, no transmission loss!
* Supports all Wii display modes (NTSC 480i 480p, PAL 576i).
* HDMI upscale to 720p or 1080p high definition output.
* Provides advanced signal processing with great precision. Colors, resolutions!
* High quality, state of the art motion adaptive de-interlacing for 480i ,576i input.
* No power adaptor, no messy cords¡Xjust one HDMI cable.
* Hassle Free! Plug and play as you go.
Specifications:
Dimensions:
34 x 73 x 14 mm
Weight:
15g
Power Consumption:
below 2W
Supported Video input Mode:
Includes all the display modes of the Wii console (480i, 480p, 576i)
Supported HDMI output Mode:
720P@60Hz, 1080P@60Hz
Input Connector:
Wii AV Multi Out Plug x 1
Output Connectors:
HDMI Connector x 1
3.5mm Stereo Audio Jack x 1.
Features:
* Automatic Configuration.
* Connects up to 4 HDMI / DVI displays at the same time to one video source.
* Allows simultaneous display
* Supports 720P, 1080i and 1080P resolutions.
* Works with HDMI 1.3 compliant devices.
* Works with HDCP compliant devices.
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-pin female.
* Power supply: DC5V 3A
Features:
* Automatic Configuration.
* Connects up to 4 HDMI / DVI displays at the same time to one video source.
* Allows simultaneous display
* Supports 720P, 1080i and 1080P resolutions.
* Works with HDMI 1.3 compliant devices.
* Works with HDCP compliant devices.
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-pin female.
* Power supply: DC5V 3A
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX
Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.
Export standard packaging
2142 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
Features:
* switches easily between any five hdmi 1.3 sources.
* maintains 480i/p, 720p, 1080i and 1080p solutions.
* support hdmi 1.3(12-bit) deep color.
* support hdcp compliant devices.
* hdmi or dvi to hdmi cables are used to connect the inputs and switcher output.
* inputs can be switched with the slim ir remote control
* installs in seconds
* fully hdmi 1.3 compliant
* plastic shell
Includes
(1) 5x1 switcher for hdmi 1.3
(1) 6v dc 1a power supply
(1) ir remote control
(1) user manual
* plug and play
* maintains 480i/p, 720p, 1080i and 1080p video formats
* support hdmi 1.3(12-bit) deep color
* support hdcp compliant devices
* fully hdmi 1.3 compliant
* transmit audio & video using cat5e stp cable
* plastic shell
*** supports 720p/1080i at distance up to 164ft ( 50meters) and 1080p 60hz at distance up to 115ft (35meters).
Includes:
(1) hdmi to rj45 converter-tx
(1) hdmi to rj45 converter-rx
(1) user manual
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
Features:
Automatic selection of optimal fusion splice program
Automatic detection of fiber end face
Automatic calibration of arc discharge
Automatic fiber alignment function
Automatic calculation of splice loss
5-inch color LCD monitor with clear digital image display
Dual mode of view, separately view of X/Y axis, simultaneous view of X and Y axis
Wind resistance function
Intuitive operating interface and menu design
Built-in battery
Compact size and light weight
Specifications:
Parameters Specifications
Applicable Fibers SM, MM, DS, NZDS
Fiber Cleaved Length (mm) 12 ~ 16 (Coating Dia.: 250um)
16 (Coating Dia. 250 ~ 1000um)
Fiber Diameter (um) Cladding diameter: 80 ~ 150
Coating diameter:100 ~ 1000
Fiber Count Single
Fiber Aligning Method Core aligning
Return Loss (dB) >60
Actual Average Splice Loss (dB) 0.02(SM), 0.01(MM), 0.04(DS), 0.04(NZDS)
Splice Mode Auto & Manual
Typical Splice Time (sec) 9 seconds with standard SM fiber
Fusion Splice Program 12 (templet), 188 (user)
Tube Typical Fusion Time 30 sec
Protection Sleeve Length (mm) 60, 40, 20
Storage of Splice Result 5000 results, 3 parameters per result
Tension Test (N) 2N
Fiber Magnification 400X (X or Y view), 200X (X and Y view)
Electrode Life 2500 times
No. of Splice/Heating with Battery Typical 130 cycles with built-in Li-battery
Monitor Reversible The fiber image can be turned over
Display Screen 5 inch color LCD monitor
Terminal RS232
Power Supply AC 100-240V with AC adapter inner Li-battery (6600mAH)
Operating Condition -10 ~ +50ó¬C; 0~95%RH (no condensation); 0-5000m above sea level; Max wind velocity of 15m/s
Dimensions (mm) 150(L) x 150(W) x 160(H)
Weight 3.52Kg including battery
Product features
Hot z-pluggable
Xaui electrical interface: 4lanse@3.125gbit/s
Below 2.2w power dissipation
Sc-duplex optical receptacle
Digital diagnostic monitor interface
Very low emi and excellent esd protection
Cooled 850nm vcsel laser and rosa
Up to 300m for om3 fiber
Operating temperature range 0ípc to 70ípc
Features
10gb/s serial optical interface compliant to 802.3ae 10gbase-sr
Electrical interface compliant to sff-8431 specifications for enhanced 8.5 and 10 gigabit small form factor pluggable module í¦sfp+í¦
850nm vcsel transmitter, pin photodetector
2-wire interface for management specifications compliant with sff 8472 digital diagnostic monitoring interface for optical transceivers
Operatingcase temperature: 0 to 70ípc
All-metal housing for superior emi performance
Low power consumption
Advanced firmware allow customer system encryption information to be stored in transceiver
Rohs compliant
Features:
Hot pluggable xenpak form factor
Xaui electrical interface:
4lanse@3.125gbit/s
Below 2.2w power dissipation
Sc-duplex optical receptacle
Digital diagnostic monitor interface
Very low emi and excellent esd protection
Cooled 850nm vcsel laser and rosa
Up to 300m for om3 fiber
Operating temperature range 0ípc to 70ípc
AV to VGA Convertor, PC Displayer for Monitoring, RCA Input
Connector : Support 1024X768 Resolution from CCD Camera to PC Displayer
VGA to AV Convertor, Transmission VGA Encoding Signal by Coaxial Cable
Support 1024X768, for Media -Eboard Distributed Instation
We are a professional manufacturer of membrane switch, graphic overlays, membrane circuit and the related supporting products, also produce or assemble fpc, pcb, silicone rubber & plastic, and hardware components
4 input hdmi signal and 16 hdmi signal sink , any input to output
With backward ir channel
Hdmi 1.3 protocol compliant
Hdcp 1.2 protocol compliant
Support deep color 36bit
Wall mounting with power protection & heat dissipation window
Dts-hd/true-hd/lpcm7.1/ac3/dts/dsd audio format
Full-hd 1080p/1600x1200uxga
It can smartly jump over these input sources which are not in work.
1 input hdmi signal can split to 8 hdmi signal sink devices simultaneously
Hdmi 1.3 protocol compliant
Hdcp 1.2 protocol compliant
Support deep color 36bit
Super slim type
Dts-hd/true-hd/lpcm7.1/ac3/dts/dsd audio format
Full-hd 1080p/1600x1200uxga
Capable for up to 2 times cascade without any transmission los
4 hdmi input and 4 output over cat5e/6 . Any input to any output
Hdmi1.2 1080p full-hd output
Hdmi1.3 1080p full-hd output, deep color 36bit
Wall mounting with power protection & heat dissipation window
Hdmi digital audio format: dts-hd/dolby-true-hd/lpcm7.1/dsd
Support xv-ycc and blue-ray player for 24fs film format
Manual or remote or with rs232 controled by computer select source input signal to different sink
It can smartly jump over those input sources which are not in work
Dc9v power supply
Color gift box, 5pcs/ctn
2142 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
