Dimmer switch 1 gang 1 way with rotary switch
FN7-12DR 12KV load break switch 400A 630A 1.General The AC H.V load switch FN7-12DR is a new type gas using indoor hv load break switch, adapt to 3 phases AC electrical power system with the frequency 50HZ and rated voltage 12KV. It is used to break out the load current and cut the short current. Rated voltage: 12 KV 1min power frequency withstand voltage, Earth to earth and between phase: 42 KV 1min power frequency withstand voltage, Isolation fracture: 48 KV Lightning surge withstand voltage, Earth to earth and between phase: 75 KV Lightning surge withstand voltage, Isolation fracture: 85 KV Rated current: 400A / 630A 4S Thermo stable current(virtual value): 12.5KA / 20KA Rated current(KV. Peak value): 31.5KA / 50KA
FN12-12D 12KV load break switch 630A 1000A 1. General FN12-12D/630-50 indoor AC high voltage load break switch, rated voltage is 12KV, rated frequency is 50Hz. It is a kind of three phases high voltage switch equipment. It can be used to breaking- closing load current, closed current, charge current for no-load transformer and cable, closing short-circuit current. The Load break switch which assembleds earthing switch can sustain short-circuit current. FN12-12DR/1000-31.5 indoor AC high voltage load break switch-fuse combination electrical appliance is a combinated indoor high voltage switch equipment which combinated by FKN12-12D load break switch and S?LAJ-12(XRNT?-12)high voltage limiting current fuse. This appliance can open any current up to short circuit current; Load break switch open working current, Fuse open short circuit current, combination open any current from working current to short circuit current, meantime Fuse makes the Load break switch opening through striking
1. Introduction JN15 12 kv series indoor high voltage earthing switch is a compositional type, and the technical parameters is corresponding to the requirements of IEC62271-102:2002. It is applicable for three-phase power system of 3-12kv, AC 50HZ. It can be used together with many types high voltage switchgear as a earthing protection unit. 2. Applicable environment 2.1 Altitude should not exceed 1000 m 2.2 The ambient temperature: -25?~ +40? 2.3 The seismic intensity should not exceed 8 degree. 2.4 Relative humidity should not exceed 95%, monthly average value should not exceed 90%. 2.5 Pollution degree: ? Main technical parameters Rated voltage: 12 kv Rated short-time withstand current: 31.5 KA Rated short-circuit duration time: 4 s Rated making current: 80KA Rated withstand current(peak value): 80KA Pole to pole distance: 150 mm, 210 mm, 230 mm, 250 mm, 275 mm Power frequency withstand voltage(1 minute) To earth, phase to phase: 42 kv, 48 kv
WD35 receives and processes radio signal which comes from the wireless switch to control various lighting equipments. Its integration with microprocessor, wireless transceivers relay makes it strong anti jamming ability. Wireless switch, wireless sensor and intelligent host are available to mate with WD35. B20 Wirelss remote control, no electricity, no battary smart switch Power supply mode self-powered Key form IO (I:turn on O:trun off) Radio working frequency within 1GHz Control range Indoor 30meters Outdoor 150meters Operating temperature Numbers of gang 2 gang Useful life 50,000 times, around 15 years Size 86mm*86mm*16mm Warranty 3~5 years
Oxygen lance is used to decarburize, dephosphorize or extract alum This kind of product is used for converter and eaf Raw material: steel pipe The main functions of oxygen lance body are: to supply oxygen and cooling water to the nozzle, whose structure should meet the production needs of converting steel-making, and is favorable to the replacement and maintenance of nozzles, to compensate action force to oxygen lance nozzle caused by outer pipe in case of thermal expansion. Appropriate lance barrel length goes upward oxygen&water supply pipe and downward molten bath surface, oxygen supply meets the need of converter nominal tonnage, and water supply guarantees cooling performance of that the oxygen lance furniture. In this case, oxygen lance designed and manufactured is reasonable, safe and stable, energy-saving and low consumption, which is effective practical converting steel-making equipment.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Features · low insertion loss · wide band, high isolation · low pdl · compact in-line package · high stability and reliability · epoxy free optical path Applications · optical amplifier · metro area network · wavelength add / drop · dispersion compensation · bi-direction communication
Features · low insertion loss · wide band, high isolation · low pdl · compact in-line package · high stability and reliability Applications · optical amplifier · metro area network · wavelength add / drop · dispersion compensation · bi-direction communication
OSW-1×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12.5×(H)8.5mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
QH-OSW-2×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension (L)28.0×(W)12.6×(H)8.0mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
QH-OSW-D2×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27×(W)12.6×(H)8.2mm . It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
QH-OSW-D2×2B Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12.6×(H)8.2mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
1 × N rack-mounted optical switch can be manually selected from front panel or control via RS232 port, Ethernet port. It can be controlled to switch step by step or set scanning automatically in certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
IR Sensor Switch FEATURES 1. Detection range: 5-10cm is recommended 2. Intertek CE approved 3. Voltage: 100-240V 4. Power: Max.250W
