Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 200000
Compact-sized, Side actuated
High contact reliability, Good drop resistance
Reflow solderable , Fixing poles of the cover available
PCB-base structure ,which can be directly mounted on PC board
Available in embossed taping packages for automatic mounting.
Sealed with flux proof, RoHS and REACH compliant
Operating Temperature Range: -30 to +85
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.15±0.0.1mm
Operating Force: 1.6±0.3N
Strong Features
Type: SMD surface-mounted tact switch
Operation Life cycles: 200000
Positive tactile feedback, Dust proof and Flux proof
High contact reliability, Low-profile and light weight
Contributes to downsizing and light weight of application devices
Strong Features
Type: DIP with ground terminal tact switch
Operation Life cycles: 100000
Soft feeling
High operating force
Steady and low contact resistance
Compatible with most surface mount soldering processes
Improved operation by using a larger push plate
RoHS and REACH compliant
Operating Temperature Range: -30 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.15±0.05mm
Operating Force:1.8�±0.5N
Strong Features
Type: 2 Pin DIP tact switch
Operating Life Cycles: 50000
Good drop resistance
Improve mounting density of components on PC board.
Reflow solderable
Contacts are completely sealed, enhancing reliability
RoHS and REACH compliant
Operating Temperature Range:-20 to +70
Rated Current and Voltage:50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength:250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance:50m
Full Travel:0.25 0.1mm
Operating Force:1.0 �±0.3N 1.6�±0.5N 2.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height can be set at the full discretion of the consumer.
Strong Features
Type:2 Pin DIP tact switch
Operation Life Cycles:60000,80000,100000
Variety of lever lengths
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and RAECH compliant
2143 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Fore: 2.0±0.5N
Strong Features
Type: DIP tact switch with LED
LED Color: Red, Blue, White, Yellow, Green
Operating Life cycles: 500000
Models with ground terminals are available of protection against static electricity.
Some of output terminals can be also used as jumper leads to make the circuit design easy.
RoHS and REACH Compliant
Operating Temperature Range: -20deg to +70deg
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: â?¥100MOhm
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mohm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5Nï¼?2.6�±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life cycles: 60000 80000 100000
Several kinds of height
Cambered terminals to ensure self retention
Meets REACH and RoHS standards
Main Specifications
Operating Temperature Range : -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 00MoHM
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mOhm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Features
Type: 2 Pin DIP tact switch
Operation Life cycles: 100000
Large choice of caps
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and REACH compliant
Operating Temperature Range: -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 1.0±0.3N1.6±0.5N2.6±0.5N
Common Height:3.8mm,4.3mm,5.0mm,6.0mm,7.0mm
The HeighHcan be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life Cycles:40000,50000,60000
Positive tactile feeling
Various Knobs for low or high profile actuations
Cambered terminals to ensure self retention
Vertical and horizontal operating direction
RoHS and REACH compliant
Main Specifications
Operating Temperature Range:-20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.25±0.1mm
Operating Force: 1.6±0.5N
Common Height:
4.3mm,4.5mm,5.0mm,5.5mm,6.0mm,6.5mm,7.0mm,7.5mm,8.0mm,8.5mm,9.0mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Contact type: Vertical and Horizontal with bracket DIP tact switch
Operation Life cycles: 80000
Outline dimension 6.0mm x 6.0mm
Variety of lever lengths, Positive tactile feedback
Good drop resistance, RoHS and REACH compliant
Available with anti-ESD (Electro Static discharge) ground terminal
Additional models and versions available
Available with us a wide array of Automatic Transfer Switch that is known for its optimum quality and cost effectiveness. This switch is sourced from most reliable and trustworthy vendors of the industry. Apart from this, our offered switch is thoroughly examined by our quality experts to ensure its unmatched quality and durable finish. Offered switch is available in various sizes and capacities for our clients to
Being one of the most emerging manufacturer and supplier of Auto Change over Switch (3 Phase)
Working Procedures:
1. Two 3 phase motors can be concurrently Controlled(A motor ON/ B Motor Off and Vice Versa)
2. Delay time for motors programmable or settable
Feature:
Electrical and mechanical interlocks prevent cross connection of power sources.
Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
Time delay ensures generator voltage is at a stable level before transfer occurs. The time delay can be disabled when an inverter is used as the alternate source.
Rugged, heavy-duty, screw-type wiring terminals allow direct connection to contactor for more reliable operation.
Heavy Duty metal enclosure with easy to use wiring diagram permanently attached.
1 year limited warranty.
Features:
Electrical and mechanical interlocks prevent cross connection of power sources.
Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
Rugged, heavy-duty, screw-type wiring terminals allow direct connection to contactor for more reliable operation.
Heavy Duty metal enclosure with easy to use wiring diagram permanently attached.
1 year limited warranty
Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.
Optical Line Protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user.
In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes.
Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back. The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission
Wide operating wavelength range:1528nm~1565nm
Three Optical Amplifier C-Band applications:
Booster
ï??n-line
Pre-amplifier
Low noise figure: typical: 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier.
A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension.
An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link.
A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver.
Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Some EDFA Models include a Red and a blue port designed for Single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
2143 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
