Auto Transfer Switch -Change

Features: Electrical and mechanical interlocks prevent cross connection of power sources. Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit. Rugged, heavy-duty, screw-type wiring terminals allow direct connection to contactor for more reliable operation. Heavy Duty metal enclosure with easy to use wiring diagram permanently attached. 1 year limited warranty

PC Type Load Auto Transfer Switch for Generators It adopted double complex contact/ horizontal pulling mechanism/micro motor energy pre storage and micro-computer control technology, basically come to Zero arc ( no arcing chamber); Adopted reliable mechanical interlock and electric interlock, executive unit adopt independent load disconnect switch, it makes more reliable and safety; Adopt "Zero Position" technology, it can force to set to Zero Position under emergency situation ( cutoff two way power supply, meet the fire linkage requirements; Load disconnect switch change over adopt singleness motor drive, switch over smooth and reliable, no noise, little impact; The driving motor have instant current across only under the load disconnect switch change over, stable working status no need to provide the working current, outstanding energy saving. Executive load disconnect switch have mechanical interlock, make sure the Normal power and Reserve Power working reliable and no interference; Distinct ON and OFF position indicator, padlock function etc., make reliable and safe isolation between power supply and loading. High security, high automatization, high reliability, working life more than 8000 times; Electromechanical integration design, accuracy change over, flexible, smoothly, adopt international advanced logical control technology, high anti-interference ability, no interference outward. Have main power ON, backup power OFF; main power OFF, backup power ON; main and backup power OFF; three working mode (I-o-II); Easy installation, control circuit adopt plug type terminal connection Four operating functions: Emergency manual, motor remote control, emergency OFF under auto control status, auto control operation. Basic Type Switch Control Characteristic Suitable for two way main and backup power system, auto transfer with auto recovery; Can expand functions by outer connection; Auto, Remote, Manual control functions; Delay 0.5s signal detect, avoid miss actuation; Under Auto control status have "O" position remote control; Can with RS-485 communication port ( optional), according to customer required.

Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Product NameRDS3 Series Dual Power Automatic Transfer Switch TypePC Type Material Of CoverPC StandardGB/T14048.11 Poles3P/4P Current16A-630A Controller TypeA: Basic type single phase monitor B:Standard type three phase monitor + fire-fighting,generator control C: Intelligent type three phase monitor+fire-fight, generator control+LCD display Use CategoryAC-33B TypeRDS3-125RDS3-250RDS3-630 Rated Working current (A) le16A-125A140A-250A315A-630A Rated Working voltage (V) Ue400400400 Rated Insulation voltage (V) Ui800800800 Rated short time withstand current (KA,rms) Icw10KA (200MS)10KA (200MS)25KA (200MS) Rated short circuit making capacity (KA,peak) Icm20KA30KA50KA Rated control power supply voltage (V) Us230V/50HZ230V/50HZ230V/50HZ Contact transfer time (s)1.51.82 About ATS NEW FEATURES ARRIVAL: 1, RS485 communication function available with RDS3 type. 2, Generator exerciser timer (Engine exerciser) is available, user can set the generator start daily, weekly or monthly. You can also choose the generator exerciser load mode, to test the generator on load or off-load. It is applied to the place where generator is not frequently used. 3, Under manual mode, by press "+" button to start or stop the generator manually. 4, High and low Frequency (Hz) protection. 5, ATS setting menu with password protected. RDS3 Series PC class dual power Auto transfer switch, mainly used in two way power supply system with rated voltage below 400V, AC 50/60Hz, rated current up to 630A, when one power supply abnormal, then it transfer between two power supply system, to ensure the power supply reliablity and safety. The ATS have " Main Power", "Backup Power" and "Two way OFF" positions, with higher breaking and making capacity, it not only can meet normal load transfer, but also can meet high inductive impedance or big motor load transfer, meanwhile due to have high short time withstand current capacity, no need special SPCD, doesn't affect the selective of inside circuit, meanwhile it also can meet the application at big capacity power supply side. Product confirm to GB/T14048.11 Standard RDS3 Advantages: a. Control power voltage

Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.

Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.

Static Transfer Switch (STS) and Automatic Transfer Switch (ATS) from 50A to 400A. It includes 2 poles STS, 3 pole STS and 4 pole STS with option of three and Single phase. STS has following features: 1) Increased power quality 2) Easy monitoring all parameters on LCD display 3) Fast microcontroller. Power blackout protection. 4) Automatic static switching. Remote monitoring of input power sources 5) Easy static and mechanical transfer between separate input sources. 6) Remote management of power events. Power event logging. 7) Advanced RS232 communication features. DRY contact alarm interface. 8) Password protected login system We offer from remote site (timed Access). 9) 2 redundant power supplies form electronic boards (hot swappable). 10) Easy front access to all components inside of the STS. 11) Second protection cover on live circuits which prevents electrical shock. 12) Input sources protected by fuses. 13) 3 positioned Maintenance bypass switch which prevents cross currents between input sources. 14) User adjustable parameters by entering a password. Built in real time clock. 15) Alarm history (with their date and time). 16) Automatic transfer test from a remote site or using front panel. Front panel Lamp test. 17) External emergency shutdown (EPO) input. 18) Hot plug construction during maintenance bypass. 19) High current output tolerant up to 1000%. 20) Temperature sensor inside the Cabinet. 21) Fast voltage black-out circuit. We offer brands like GE, EATON, MGE, APC, SOCOMEC, INFORM, Powerware. 22) Input phase balance and phase sequence fault detect circuit. 23) Adjustable Input source frequency lower/upper limits. -------------------------------------------------------------------------- CONTROL TECHNOLOGIES FZE (Ctrltech) Sharjah, UAE. T: +971 6 5489626 Mobile: +971 55 2338912 / +971 50 1537113 F: +971 6 5489627 E: sales@ctrltechnologies.com W: www.ctrltechnologies.com www.datacenter-serverroom.com

Automatic transfer switch is one of adopted international ATSE technology developed by our company. It is suitable for power supply system with rated insulating voltage is AC800V, rated working voltage is AC240/415V, and below DC250V, and AC 50Hz/60Hz, rated working current is 16A-3200A of two-path. The transfer switch and the matching intellect display, they are main used for high building, the post and communication, coal mining, shipping, military facilities industrial assembly line etc the situation of need the interruption power supply. 273*245*120

Product Description - We have power range for all products so we need to add ach power one by one. Is it possible to myself Product origin - We have Made in Turkey and Made in Germany option Minimum Order Size and Packaging details - There is no min order limit Oversea packing Key Specifications/Special Features Place of Origin - Turkey and Germany Brand Name - LOTUS Model Number - LOTUS-STS Usage - SVC Phase - Three Phase Protection - IP20 / IP55 / IP65 Frequency - 50Hz/60Hz Power factor - 0.8/0.9/1/Customized Color - Black or RAL7035 or Customized Rated power - 3KVA - 4000KVA 25A- 600A

Cooking Heater auto switch single to both