Find Verified Construction Materials Suppliers, Manufacturers and Wholesalers

Description:
Fairing Coat Mortar: is one component, polymer modified, cementitous mortar based containing silica fume.
Product name: Fairing Coat Mortar
Compressive Strength: â?¥ 20 Mpa (1 day)
â?¥ 50 Mpa (28 days)
Mixing ratio:
- Approx. 5.5 L of clean water per 25 kgs barrel
- Approx. 1.1 L of clean water per 5 kgs barrel
Layer Thickness: Max. 5mm
Pot Life ~ 30 min. (at 27�ºC / 65% r.h)
Usage:
Fairing Coat Motar: is used as repair mortar for minor surface defects on:
- Concrete
- Mortar
- Stone
Fairing Coat Mortar: is a cosmetic mortar designed to eliminate surface defects due to demoulding, pores or honeycombs, and is suitable forsmall repairs on:
- Precast concrete elements
- Fair-face concrete
- Columns and beams
- As levelling mortar and fairing coat or finishing skim coat to concrete, mortar patches and screeds.
Advantages:
- Ready to use requiring only the addition of water
- Excellent workability
- Rapid strength development
- Good mechanical strength
- Good adhesion to substrate
- No corrosive effect on reinforcement steel
- Non-toxic
Packaging: Barrel 5kgs and Barrel 25kgs
Colour: Powder / Grey
Shelf life: 9 months if stored properly in unopened, original packaging.
Storage conditions: Dry, cool, shaded place
Mixing ratio:
Water : (Fairing Coat Mortar) powder = 1:4.0 (parts by weight)
Approx. 5.5 L of clean water per 25kgs barrel.
Approx. 1.1 L of clean water per 5kgs barrel.
Layer Thickness:
Max. 5mm
Pot Life:
~ 30 min. (at 27�ºC / 65% r.h)
Fairing Coat Mortar: should be mechaically mixed in a clean container using a low-speed electric mixer (max. 500 rpm). A minimum mixing time of 3 minutes is recommended to throughly blends the components.
Fairing Coat Mortar: can be applied by spatula or trowel. Work the mixed mortar well into the substrate. Force material against the edge of the repair, working towards the center.
Curing treatment:
To achieve the full potential of any cement based material, curing is essential. In warm or windy weather, the use of standard curing methods are necessary (use of polyethylene sheets or damp hessian) to prevent premature drying out of mortar.
Cleaning of tools:
Remove non-hardened Products from tools and requipment with water. Hardened material can only be remove mechanically.

Description:
VFLOOR1 is a single component Cementitious Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Standard primers give excellent bonding to the VFLOOR1 products
Product name VFLOOR1
Compressive strength >40 Mpa, 28 days later
Flexural strength >8 Mpa, 28 days later
Application temperature 5-30 degree
Mixing ratio 20kgs powder + 5.2kgs Liquid
Product name PRIMER
Mixing ratio 2kgs Primer + 2L water + 4kgs cement
Feature & Benefits:
- Single component, just mix with water
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture.
- VFLOOR1 20kgs barrel required approximately 5.2 litres of clean water
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 3 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR1 will appear to be dry after approximately 24 hours.
Floor laying may commence after 48 hours.
Coverage:
- At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.

Sprayed concrete is a fast hardening material for stabilization and support of structures and for concrete applications without using any moulds. Sprayed concrete is an interaction of man, machine and concrete. Man, personified in the work of the nozzleman, requires technical skills and dedication to the job. The operator must be able to rely fully on the machine and the sprayed concrete material. It is the interaction and quality of these components that finally determines the success of the sprayed concrete application Sprayed Concrete has many advantages
Application to any elevations because sprayed concrete adheres immediately and bears its own weight
Can be applied on uneven substrates
Good adhesion to the substrate
Totally flexible configuration of the layer thickness on site
Concreting without formwork
Reinforced sprayed concrete is also possible (mesh/fiber reinforcement)
Rapid load-bearing skin can be achieved without forms or long waiting times.
Sprayed Concrete Applications:
- Excavation stabilization in tunnneling and mining construction
- Slope and trenching stabilization
- Protective lining
- Concrete repair (concrete replacement and strengthening)
- Special lightweight load-bearing structures
- Restoration of historic buildings (stone structures)
- Sealing works
- Construction of swimming pools
User Notes:
The technical details and recommendations contained in this data sheet are given in good faith and represent the best of our knowledge and experience at time of priting. It is the responsibility of the user to ensure that the products are used in accordance with Sprayed Concrete Products instruction.
Consumption:
6 kgs Additives /100 kgs cement
Shelf Life:
Storage in dry conditions, raised above floor level and temperature range of between 5�ºC and 30�ºC. The usable shelf life shall be approximately 9 months.
Safety Data:
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuff
Packaging: 25kg/barrel

DESCRIPTION:
Stop Leak is a liquid admixture when mixed with portland cement becomes an extremely rapid setting plastic material used to stop pressure leaks in concrete and masonry structures.
USES:
Stop Leak can be used to stop water leaks in dams, foundation walls, manholes, pipelines, underground structures, swimming pools, foundtains, tunnels, basement walls and floors.
ADVANTAGES:
Will stop water under pressure.
ECONOMICAL:
Sets within 60 to 90 seconds, generates minimal heat when setting
Becomes extremely plastic when combined with portland cement
Stop Leak liquid must be stored at temperatures above freezing.
MIXING RATIO:
1Kg Stop Leak : 2,8 kgs cement (2,2 pounds Stop Leak : 6,17 pounds cement)
LIMITATIONS:
Judgment must be used to mix Stop Leak in small quantities due tu the extremely rapid set. After the portland cement is added to the liquid Stop Leak, the mixed compound will set in approximately 60 seconds. This action allows the material to bond mechanically and chemically to saturated surfaces. A delay in setting, if required, can be attained by adding fine sand to the neat cement mixture or by reducing the amount of cement added to the liquid.
Safe
- Odorless, non-toxic, does not affect the health of users and the environment
- Should wear gloves and necessary protective equipment when using
- If splashed into eyes, use clean water or eye drops to wash several times
Storage conditions
Product must be stored in original unopened and undamaged sealed packging in dry conditions.
Colour: Clear liquid
Shelf life
12 months from the production date
Packaging
- Stop Leak 0,5Kg (1,1Pounds)
- Stop Leak 2,5Kg (5,51Pounds)
- Stop Leak 6,5Kg (14,3Pounds)

Compose A Joint Usg Boral - Ready Mix Joint Compound All Purpose

Joint Compound Is Usually Sold Pre-mixed. This Product Is Used For Almost Every Drywall Installation And Repair. Joint Compound Is Used To Finish Drywall Joints And Corners. It Provides Faster And Superior Performance In Joint Closure. It Is Also Useful For Repairing Cracks And Holes In Existing Plasterboard And Plaster Surfaces. You Can Save Time By Using Joint Compound Cause It Does Not Need To Any Extra Process. It Is Ready To Use. It Takes 6 To 12 Hours To Dry, Depending On The Humidity And Temperature.

Turkey Is One Of The World's Leading Country In The Gypsum Resources And Production Of Gypsum. As Board And Wall Company; We Export Highest Quality Of Gypsum Powder And Joint Compound All Around The World.

Megaturk Co. Ltd, Istanbul - Turkey

This type of product has a higher water reduction rate,
which is higher than JS-103, and has ultra-high slump protection performance. It is
especially suitable for the environment with poor materials or summer with high
temperature. Compared with the polycarboxylic acid mother liquor on the market, it can
reduce the consumption of slump protection mother liquor by 20%-40%.It is mainly used
in high-strength concrete with high requirements, and its products are mainly used in
high-speed railway and high-speed railway Road, hydropower and other large
engineering projects pumped concrete, super fluid self-compacting, high strength and
high performance concrete and commercial concrete.
Product Feature
1.It has a higher water reduction rate and a higher slump protection performance,
especially for the concrete with great loss in time.
2.High water reduction rate and low dispersion velocity.
3.The comprehensive cost performance is high, especially suitable for summer, high
temperature environment.

Facade with a clean design, but a relatively more expensive performance due to the specific requirements for the sealing gasket and weather conditions during installation
Possibility for glazing up to 64mm
Extremely good thermal performance uw> = 0.6 w / m2k

A new generation of facades corresponding to different types of construction and architectural solutions
Possibility of glazing up to 56mm
Extremely good thermal performance uw> = 0.6 w / m2k
Very good waterproofing and noise insulation characteristics

SourcEEZ is a multi product Indian sourcing agency which handles END TO END sourcing operations. Right from vendor analysis and selection, to overseeing the course of production, and to finally warranting a smooth sail for your products, we ascertain that you have a stress-free grip on the procurement process as a whole.

Dubond's Dupoxy is a stage of Grouting material of highest quality that provides asethetic effect and durability. It perfectly prevents stains,spillage,chemical attack in filled groove thicknesses of tiles,stones. Dupoxy is thixotropic two part epoxy based formulation having excellent resistance to wear and European choice special sheen affect which makes it a darling choice of consutant fraternity.

Part A consists of mixture of epoxy resin,siliceous aggregates and additives.

Part B consists of mixture of organic catalysts.

The advantage of two part epoxy grout system of Dupoxy is its high user friendliness that is i.e.the filling of this GEL filler in the grout is easier than all the distantly following equivalent products. It has a matt finish with an ingredient that provides crystalline sheen affect with ease of clean ability.

It is suited for residential and commercial installations 1ncluding those with total hygiene control, damp and wet environments.

Dubond's Dufill is a single part high degree of hardness, calibrated and smooth finish that is suitable for high resistance grouting from 1 mm to 12 mm on all horizontal and vertical surfaces with complete range of tiles and stone.
It is thixotropic has a wide range of colors and finishes. The heavy research by engineers for innovations via market feed back has made DU Fill an architect's choice and user'spride. DU Fill range of colours are developed to match all moods of colours, band including classic indian, victorian, contemporary.

3D Board provides a creative and cost effective solution for bringing decor to life in the home or commercial environment. 
3D Board surface is smooth, texture is lifelike, bulk density is even, color nature..It easy to maintain and clean.
3D Board board has a good performance on high hardness,strong adhesiveness ,abrasion resistance ,chemical resistance,scratch resistance,water proof and heat resistance.
3D Board board is used in wide range of construction,interior office decoration,furniture area like wardrobe,kitchen cabinet,slatwall,corridor wall,bathroom wall,etc.

SiC castable with high purity SiC raw material as main material, pure calcium aluminate cement and micro powder as binder, has high high temperature strength and wear resistance, can be cast, spraying and coating construction.It can be used in waste incineration furnace, blast furnace body, cyclone furnace, efferent furnace and boiler, etc.

It has the common advantages of corundum castable and mullite castable.High temperature strength, good thermal shock resistance and structure spalling resistance;Good thermal shock resistance, high load softening temperature, low high temperature creep rate, good chemical corrosion resistance, can be used for large power station boiler anti-wear lining and other high temperature kiln lining.

Lightweight castable has light volume, high compressive strength, acid and acid gas corrosion resistance.Low heat insulation, heat preservation, water absorption rate features, simple construction, is the most ideal construction of alkali resistant parts under high temperature.Good workability, adhesive power is strong, the initial setting time and construction operation time is long, fast growth strength, permeability resistance is strong, do not need to acidification treatment, easy to ensure the masonry mortar joint dense full, can significantly increase the tightness of chimney lining wall, integrity and lined with corrosion resistant ability, high chimney, and the high temperature flue duct lining ideal cementing materials, also can be used in petroleum, chemical industry, non-ferrous metallurgical industry such as acid pool, slot acid engineering, etc.

Heavy castable is high temperature resistance, high strength, according to the use of the environment to mix, with wear resistance, flame erosion and other functions, generally direct contact with the flame.

Low heat insulation, heat preservation, water absorption rate features, simple construction, is the most ideal construction of alkali resistant parts under high temperature.Good workability, adhesive power is strong, the initial setting time and construction operation time is long, fast growth strength, permeability resistance is strong, do not need to acidification treatment, easy to ensure the masonry mortar joint dense full, can significantly increase the tightness of chimney lining wall, integrity and lined with corrosion resistant ability, high chimney, and the high temperature flue duct lining ideal cementing materials, also can be used in petroleum, chemical industry, non-ferrous metallurgical industry such as acid pool, slot acid engineering, etc.

According to the different wear medium and erosion speed of the flue wear pouring material, generally in the duct, elbow and cyclone separator at the construction thickness of 20mm, local wear is serious parts, such as the separator cutting cone bucket, cutting chute, etc., can increase the construction thickness to 30mm or 40mm.If the construction thickness is more than 20mm, it is necessary to weld the isolation rebar on the equipment motherboard first.When the construction thickness is 30mm, 6mm steel bar shall be adopted.When the construction thickness is 40mm, 8mm-10mm steel reinforcement shall be adopted;Then weld the steel mesh on the rebar, stirring and daubing procedures are the same as when the construction thickness is 20mm.

12Mm Thickness Acoustic Concealed Mineral Board,Square Fissured Ceiling Board Tile
Transportation and storage
1. Steel corner is necessary at the touch point of the rope and the board box, so that can avoid damage of the box.
2. Support the mineral wool sound absorption board with wooden structure that is higher than 15cm when the board is put on the ground. The distance to the wall should be more than 40cm.
3. Please pay attention to the warnings on the box in transportation and storage.

Cycle and reutilization
Mineral fiber, the main raw material, contains recuperated slag, the organic fiber is recuperated newspaper. The recuperated materials do not contain any asbestos, formaldehyde and other venenous and noxious substance.

The scrape during manufacturing and old ceiling board can reused(the reusing rate can reach 79%) which decreased the builders rubbish and avoids the environment pollution.

Green production process
The production process accords with the standard of environmental protection. The main released substance during production process is steam.

Green application
The main function of mineral wool board is sound absorption and noise reduction which can help to ease oneself and abate the noise.
The mineral wool board can absorb and disassemble poisonous substance, increase the density of negative oxyanion effectively and help us to build a foresting cities.

Absorbing the excess moisture and improve the living environment.
The strong reflected ability can improve the indoor sunlight, protect the vision and ease oneself.

Energy saving and consume decreasing
The high reflectance of mineral wool board can decrease the electric power cost indirectly. The rate can reach 18%-25%.
The performance of heat preservation and heat insulation can decrease the costs of refrigeration and heating greatly and the rate can reach 30%-45%.

Patterns: Pin hole fine fissured, dune surface, sand textured, customized
Material: Wet formed mineral fiber
Surface: Vinyl latex
Color: White, black
Size: 595*595mm, 603*603mm, 603*1213mm, 600*1200mm, customized
Thickness: 6-20mm
Edge: Square, Tegular, Micro, Concealed
NRC: 0.4-0.6
Fire Resistance: Class 0/ Class 1-BS 476
Light Reflentance: 0.80-0.95
Humidity Resistance(RH): 80%-95%
Environmental protection: Non-asbestos, NO formaldehyde