Ready-Mixed Mortar for Various Construction Purposes
Our Ready-Mixed Mortar Factory can supply large quantities of ready-mixed mortars for different construction purposes. They are:
Masonry mortar
Plastering mortar
Special thin layer masonry mortar
Special thin layer plastering mortar
Flooring mortar
Polymer crack-resistant waterproof mortar
Thermal insulation mortar
Soundproof mortar
Door and window joint filling mortar
ALC panel bonding mortar
Ceramic tile adhesive
If you have interest in any of the above ready-mixed mortars, please feel free to contact us with your specific requirements including packing and possible order quantity, etc., and we will provide all the necessary details.
Advantages of ready-mixed mortar:
Ready mixed mortars offer top quality construction with low cost.
Ready-mixed mortars solve the problem that the proportion of mortar prepared by traditional mixing is difficult to control and thus influences the construction quality. The measurement of ready-mixed mortar is very accurate and the quality is reliable. Because mortar with different purposes has different requirements for shrinkage, crack, heat preservation and moisture, etc., and the workability, water retention and setting time of construction requirements are also different, these specific requirements need to be formulated strictly according to scientific formulas, and only the production process of ready-mixed mortar can meet these requirements.
Because of the accurate measurement and quality assurance, the engineering quality after using ready-mixed mortar is obviously improved, the construction period is obviously shortened, and the amount of labor, reduced.
Ready-mixed mortar is a factory-ready-mixed material, which can be used only by adding water and stirring it evenly at the construction site, with little dust escape and more environmental protection. Excellent construction quality will greatly increase the confidence of contractors and owners. The leakage of waterproof mortar layer traditionally mixed on site is also a prominent problem that puzzles owners, but many special waterproof materials in ready-mixed mortar will fundamentally solve such problems.
Our ready-mixed mortar factory has been trying to develop new products and one of them is the ready-mixed heatproof mortar. Here are the product details.
1. Basic information
Specification and color: 20kg/bag; white powder
Compliance standard: Q/DGJC 12-2018 "Flat Roofing Mortar for Buildings"(China National Standard)
2. Product features
Heat insulation and waterproof, anti-cracking and anti-alkali, fire and flame retardant, green and environmental protection.
3. Scope of application
It is applicable to:
---the protection and heat insulation of substrates such as waterproof layer of buildings and cement mortar for flat roofs.
---the protection of house waterproof layer and liquid coil waterproof layer.
---substrates such as cement mortar, cement-based or asphalt-based waterproof coating
It is not applicable to:
---substrates such as colored steel tiles, glazed tiles, ceramic tiles, etc.
---sloping roofs.
4. Product Overview
Ready-mixed heatproof mortar is a new type of inorganic material pre-mixed and dry-mixed with selected lightweight aggregates, inorganic cementitious materials, additives, ect.
It has excellent thermal insulation performance, aging resistance and fireproof performance, and is easy to use.
Just add water, stir and start the on-site construction work.
The product is one of the components of the roof waterproof system, which is used for thermal insulation protection of flat roof, with good thermal insulation effect and waterproof layer protection effect. It can also be used for the protection and thermal insulation of other substrates such as cement mortar flat roofs.
Brand name : ORBOFIX
Origin : Made in Turkey
Payment : TT, LC %30 in front at purchase, %70 before loading
Whole Sale Price
Minimum Order Quantity : 3000
WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish.
FEATURES :-
WALL GUARD
PUTTY
1. Provides smooth and uniform finish to rough plasters
2. Good Workability
3. Does not require curing with water
4. Good water resistance
5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength
6. Controlled water vapour permeability
7. Excellent abrasion resistance
8. Resists growth of algae and fungi on wall
9. Good intercoat adhesion to emulsion paints
RECOMMENDED APPLICATION :-
It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : 6-8 HOURS
GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA :-
ABRASION RESISTANCE : Excellent
WATER RESISTANCE : Excellent
SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint.
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
SUMO ACRYLIC WALL PUTTY It is one of the best products of itâ??s kind available in the market, provides a very strong, durable foundation and brings out the best performance from the finish paints, both in looks and in durability.
FEATURES :-
SUMO Acrylic Wall Putty is a water based, ready-to-use putty meant for filling and smoothenening out cracks and dents on the plastered wall or similar interior surfaces.
a) The putty has special acrylic binders that ensure that it retains a strong grip on the wall surface, thereby increasing the life of thw paint film.
b) It is made using special equipment and technology that ensure smoothness and consistency
c) On account of the puttyâ??s exceptional whiteness and smoothness, emulsions painted over the putty will tend to look richers
d) It also enhances breathability and lesser porosity compared to conventional putty, thus improving paintperformance further
e) It is quick drying, thus ensuring faster completion of jobs
f) It has better alkali resistance, thus making it more suitable for new walls
RECOMMENDED APPLICATION :-
SUMO Acrylic Wall Putty Can be used for priming plastered walls, asbestos, brick work, concrete, etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 1 coat: 38-40 sq.ft/KG
2 coats: 24-30 sq.ft/KG
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : Surface drying time â?? 20 minutes
GLOSS LEVELS/SHEEN LEVELS : Silky smooth & Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
Ensure drying time of 1 Week before cleaning.
An expansion joint or movement joint is an assembly designed to hold parts together while safely absorbing temperature-induced expansion and contraction of building materials, and vibration, or to allow movement due to ground settlement or seismic activity
We have stock lot materials available at our UAE warehouse, it is now ready for sale in terms of full lot that is 500 MT which is included Channel, Girders, I-Beam, Conduite Pipe, Chequered & Plane Plate, Square Pipe etc.
A calcium silicate insulation board is a non-asbestos insulation product that can withstand continuous working temperatures from 650 to 1100 . It is lightweight, has low thermal conductivity, high strength, is easy to install, reliable and durable. Available in 2 grades, 650 and 1000 and 1100, they are commonly used as a backup insulation for furnaces in the steel, petrochemical, ceramic, cement and glass industries or for fire protection in building construction. It not only saves energy but also increases productivity and provides protection for personnel in industrial safety. In housing construction, calcium silicate insulation board is also used as a fireproof insulation material for ceilings and walls and as a decorative sound-absorbing material.
Properties of calcium silicate insulation board
Thermal shock resistance and stability
Consistently low thermal conductivity
High structural strength at high temperatures
Non-combustible
Electrical insulation properties when dry
Easy to process
Insoluble in water, non-corrosive
Applications
The calcium silicate insulation board is easy to install and handle, and its low thermal conductivity makes it ideal for insulation. It is non-toxic and asbestos-free.
The calcium silicate insulation board is widely used in urban heat networks, metallurgy, electronics, machinery, steel, petrochemicals, ferrous and non-ferrous metal casting, aluminum, ceramics, glass and other industries.
Advantages of calcium silicate insulation board.
Asbestos-free
Product Description
Single Axis Foot Description
Constructed from strong, lightweight composite materials and an advanced design, it provides state-of-the-art single-axle feet. 10% to 20% lighter than traditional single-axle feet, this low-mobility model features neutral, realistic, waterproof makeup and interchangeable front and rear bumpers with three durometers. Supplied with moulded titanium pyramids.
The unique design feature of the single axis foot is a single articulating joint set at or slightly below ankle height.
The joint allows the toes to be raised (dorsiflexion) and lowered (plantarflexion) relative to the tibia. The amount of movement is determined by a rubber cushion within the ankle unit.
The cushion absorbs shock and cushions the user as he transfers weight from heel touch to toe off.
Overview
1. Item no : 1H40
2. Material : Polyurethane
3. Color : beige
4. Weight : 140-500g
5. Heel height : 10+/-5mm
6. No. range : 21-28cm
7. Weight up to : 100-125kg
8. Quality : have past the one million times bent no break test.
1. Excellent adhesion - prevents falling of tiles
2. Low shrinkage - prevents cracking of tiles and joints
3. Needs no water curing - saves labour and time
The casing cement-head with double plugs (called as cement-head ) is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body , and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
The new anti - crusting lining board of our company has the characteristics of simple installation and high reliability. It can replace the formwork, and no demoulding is needed after pouring. Directly put into use, shorten the construction period, improve the construction efficiency.
Applicable PARTS: kiln tail smoke chamber, rising flue, cutting cone and cutting pipe and other parts that are difficult to repair with skin and wear, and can also be used for cutting slope and other parts.
Typical Application
1.Cement industry
kiln back lining thermal insulation
2.Ceramic industry
lining of various kilns for thermal insulation, Kiln door, kiln car and dilatation joint, etc,.
3.Petrochemical and metallurgy industries
Heat treatment furnace kiln back lining thermal insulation, mechanic and metallurgy heating furnace, thermal treatment furnace and others industrial furnace and hot face internal lining
4.Glass industry
Glass kiln lining and back lining thermal insulation
5.Aluminium industry
reduction cell firebricks back linings, high temperature reaction, heating device-wall lining and back linings
6.Back-up insulation to brick & castable
7.high temperature electrical equipment thermal insulation
The calcium silicate board is 100% non -asbestos, fire resistant, insulation, Can be used in furnace, kiln, oven's insulation project in many industry areas. common size: 600*300, 1000*500, working temperature 650C and 1050C, thickness: 25-140mm.
PCE is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios. Polycarboxylate superplasticizer is compatible with air-entraining agents, microsilica, accelerators and many other admixtures; however,each material should be added to the concrete separately.
Thickness 6 mm
Usage/Application Partition
Size 8-4 sq ft
Material Cement, Fibre
Attaching Type Screwed
Fiber cement boards are composite materials made of sand, cement and cellulose fibers. More specifically, they are composed of Portland cement with glass-fiber mesh on the surface. These boards can be used independently or along with plywood.
Additional Information:
Delivery Time: 24 hour
Packaging Details: loose
146693 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
