Lancing castables grade 80/82 % Alumina, quantity in stock 400 m/t with wire
Usage : Interior Decor Material : Castable Design Method ; Factory Made Resistance Durability : Fire Resistant
Radhaswami industries manufactures castable refractory for use upto 1800 c. These are used to protect metallic vessels from extreme high temperatures and are usually hydraulic setting. In common terms, these are concretes capable of withstanding high temperatures. These come in different grades depending upon the temperature of application and the molten metals or any other chemicals to be heated/processed. 50 kg hdpe bag with liner.
SiC castable with high purity SiC raw material as main material, pure calcium aluminate cement and micro powder as binder, has high high temperature strength and wear resistance, can be cast, spraying and coating construction.It can be used in waste incineration furnace, blast furnace body, cyclone furnace, efferent furnace and boiler, etc.
Heavy castable is high temperature resistance, high strength, according to the use of the environment to mix, with wear resistance, flame erosion and other functions, generally direct contact with the flame.
According to the different wear medium and erosion speed of the flue wear pouring material, generally in the duct, elbow and cyclone separator at the construction thickness of 20mm, local wear is serious parts, such as the separator cutting cone bucket, cutting chute, etc., can increase the construction thickness to 30mm or 40mm.If the construction thickness is more than 20mm, it is necessary to weld the isolation rebar on the equipment motherboard first.When the construction thickness is 30mm, 6mm steel bar shall be adopted.When the construction thickness is 40mm, 8mm-10mm steel reinforcement shall be adopted;Then weld the steel mesh on the rebar, stirring and daubing procedures are the same as when the construction thickness is 20mm.
Al2O3 Content (%): 75%-90% Refractoriness (Degree): Common (1580°< Refractoriness< 1770°) Model Number: GLM- FIRE CAST Brand Name: GLM
Refractory castables are produced from refractory aggregates, refractory powders, binders and other additives and can use directly or use after adding appropriate water or other liquid. Refractory castable is used as lining turning kiln, hot converter lining heat treatment furnace, furnaces of metallurgy industry, chemical industry and construction industry, circulation part of furnaces. Characteristics High refractoriness, high refractoriness under load. High density, low porosity. Good slag resistance and corrosion resistance. High strength and wear resistance. Good resistance to flake performance. Good thermal shock stability. Scouring resistance. Long service life
In the rotary klin calcining petroleum coke, the petroleum coke is calcined in a natural way, and the temperature is at about 1350.The lining material hall be of good thermal shock resistance, small changes in the lining line and excellent abrasion excellence. The castable produced by our company adopts dense brown corudum and mullite as the aggregate and fine powder, mixed with 97 sillicon carbide to increase the thermal shock resistance and abrasion resistance, and ensure small changes in the lining line. In the process of use, each castable plate is tightly bonded, without seams and castable peeling. And the petroleum coke is not sticky to the klin wall in the calcining process.
