Power Source: Battery With reasonable design, our locomotives have advantages as convenient in operation, longer usage life, bigger traction tonnage and smaller energy consumption, and easier in maintenance.
JG-KSB BLASTER is safe, high productivity and long life wear and tear parts as compare to others. The portable abrasive blaster is works on 'Direct Pressure System' resulting in very high cleaning rate and more economical system by Manual blasting, It's manufactured as per IS-2825 and hydraulically tested for 250 psi. The machine is supplied with long life tungsten carbide lined nozzle, anti-static blast 1hose, alloy steel wear and tear parts, with/without remote control for on /off and remote control versions are denoted with suffix "R", Remote control system is complete pneumatic control, when handle is activated blasting begins and when the handle is released the system releases air from the machine to allow for filling of abrasives: OPERATOR'S SAFETY WEARS JG-KSB are offered to safety wear for operator safe, comfortable and Hazard free working, in abrasive blasting operation dust and noise are generated so operator need protection in such environment. Air fed Helmet Helmet Air conditioner Air breather, Operator's suit Hand gloves Gum boots APPLICATION Mould / Die Cleaning De-Sanding De-Scaling Preparation of surface for protective coating De Rusting Etching De-Buring SPECIFICATION FOR OUR STANDARD PORTABLE BLASTER JG-KSB-P7-1001R 10CFT-1000KG METALIC GRIT, 15 TO 20 SQMTR PRODUCTION CAPACITY, NOZZLE 10/12mm, BLASTING HOSE 32mm, 240CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 75HP, FOR 12-80MESH GRIT, 250KG EMPTY WT., DIAxHT 800x1600mm. JG-KSB-P7-501R 5CFT-500KG METALIC GRIT, 9 TO 12 SQMTR PRODUCTION CAPACITY, NOZZLE 8mm, BLASTING HOSE 25mm, 135CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 40HP, FOR 16-80MESH GRIT, 190KG EMPTY WT., DIAxHT 610x1400mm. JG-KSB-P7-301R 3CFT-300KG METALIC GRIT, 4 TO 7 SQMTR PRODUCTION CAPACITY, NOZZLE 6mm, BLASTING HOSE 19mm, 70CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 25HP, FOR 25-80MESH GRIT, 150KG EMPTY WT., DIAxHT 365x1300mm. JG-KSB-P7-150 1.5CFT-150KG METALIC GRIT, 3 TO 4 SQMTR PRODUCTION CAPACITY, NOZZLE 5mm, BLASTING HOSE 19mm, 45CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 15HP, FOR 35-80MESH GRIT, 100KG EMPTY WT., DIAxHT 365x1100mm.
Flotation is mainly for solid-liquid or liquid-liquid separation. Large sum of micro bubbles produced by dissolving and releasing system adhere to solid or liquid particles with same density as waste water to make the whole float to the surface thus achieve the aim of solid-liquid or liquid-liquid separation.
The application of mine separator polyurethane hydrocyclone sand separator Hydrocyclone has been widely applied in classification, thickening, dewatering, desliming, separation, washing and other processes in ferrous and non-ferrous metal mines, non-metal mines, chemical mines, and it also has been widely applied in coal slime classification, thickening, dewatering, desliming and other processes.
Descripition Vibrating screen is widely applied in coal dressing, ore dressing, building material, electricity and chemical industries. It is doing circular movement while at work, and it is of a highly-effective, newly developed and multilayer machine. With the introduction of eccentric shaft vibrating exciter and particular block, the amplitude can be adjustable. (Note: According to different requirements of customers, our company applies vibrating screen with different specifications and vibrating modes.) Working Principle When vibrating screen works ,two motor with synchronous reverse rotation that will produces the vibrating exciter with vibrating force , making the screen body and screen with longitudinal motion ,thereby the material upper on the screen will have exciting force and move forward a range, to achieve a complete screening working . Models: The screen deck size could be customize-made There are single deck type and double deck type for option
The working principle of China supplier mining equipment hot circular sand gravel mining vibrating screen for sale Hot circular sand vibrating screen is single-axis circular-movement inertial vibrating screen, the working of hot circular sand vibrating screen depends on inertial motor and inertial strength produced by eccentric plate, because of the vibration of screen box, the materials are threw out, so that materials of certain size go through the screen mesh, and the screening aim is realized. Since the magnetic exciter is installed on the gravity center of screen box, the two long elliptical axis form a shape like a Chinese character, and the upper of long elliptical axis in inlet end is in the same direction with the outlet, which favors the spread of materials which is in the screen box.
Description The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences. STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times. Working Principle Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results. Main models: D20 with 1-2t/h capacity D30 with 2-7t/h capacity D60 with 15-30t/h capacity D80 with 30-70t/h capacity D100 with 60-100t/h capacity
HD 1720 specifications: Ring diameter: 1720 mm Roller size: 510*300mm Center speed: 92.5r/min Max feeding size: 30mm Final product size: 80-400mesh Capacity: 5-32t/h Dimension: 12500*12250*10400mm Total weight: 48ton HD1720 feature: 1.Reduce the roller and vibrate and improve the production. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, acheive the application of oil once, use for 30-45 days. 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved. 5.Higher Accuracy powder Classify, without coarseness missing. 6.High efficiency and energy-saving centrifugal blower. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HGM148 ultrafine powder grinding mill specification: Ring diameter: 1032 mm Layer: 4 piece Roller Qty: 36 piece Input size: 20 mm Final product size: 3-35 um Main unit power: 132 kw Classifier power: 30 kw Screw feeder power: 4 kw Blower power: 75 kw Air comprassor power: 11 kw Blower volum: 12292-14643 m3/h Blower pressure: 12321 Pa Main unit speed: 200 r/min Classifier speed: 500-2900 r/min Capacity; 800-5000 kg/h Main unit weight: 14.2 ton Pulse dust filter area: 256 m2 HGM Technical features: 1. Reliable operation of the grinding chamber: this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. It has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost.
HD 2500 specifications: Ring diameter: 2500 mm Roller size: 600*300mm Center speed: 70r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300mm Total weight: 75ton Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HGM148 ultrafine powder grinding mill specification: Ring diameter: 1032 mm Layer: 4 piece Roller Qty: 36 piece Input size: 20 mm Final product size: 3-35 um Main unit power: 132 kw Classifier power: 30 kw Screw feeder power: 4 kw Blower power: 75 kw Air comprassor power: 11 kw Blower volum: 12292-14643 m3/h Blower pressure: 12321 Pa Main unit speed: 200 r/min Classifier speed: 500-2900 r/min Capacity; 800-5000 kg/h Main unit weight: 14.2 ton Pulse dust filter area: 256 m2 Range of application HGM Ultrafine Powder Grinding Mill is a new type grinding equipment with optimum structural design developed for the ultrafine powder industry by our company. it is applied to the processing of nonmetallic minerals with the water content less than 10% and the Moh's hardness under6, such as calcium carbonate, talcum, barite, wollastonite, feldspar etc. It is mainly composed by feeding machine, main engine, grader, pulse dust collector, high pressure positive blower, electronic controlled device and other parts. Technical features: 1. Reliable operation of the grinding chamber: compared with common grinder, this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, therefore, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. Compared with the same type machine, it has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost.
HGM200 ultrafine powder grinding mill specification: Ring diameter: 1400 mm Layer: 4 piece Roller Qty: 52piece Input size: 20 mm Final product size: 3-35 um Main unit power: 200 kw Classifier power: 55 kw Screw feeder power: 3 kw Blower power: 132kw Air comprassor power: 15 kw Blower volum: 28000-35000 m3/h Blower pressure: 7800-8500 Pa Main unit speed: 180 r/min Classifier speed: 500-2900 r/min Capacity; 1800-12000 kg/h Main unit weight: 25ton Pulse dust filter area: 358 m2 Technical features: 1. Reliable operation of the grinding chamber: compared with common grinder, this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, therefore, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. Compared with the same type machine, it has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost. -
LM900 specifications: Grinding diameter: 900 Production: 1-10t/h Input size: less than or equal to 10 mm Moisture: less than or equal to 6% Final product size: 80-1500 mesh Main unit power: 132kw LM900 features: 1. High level of automation: the equipment adopts PLC control system to uniformly control. The system is safe, sensitive and reliable. 2. Excellent powder quality. It adopts superfine pulverizing and material layer grinding principles, the powder solubility is excellent, the dispersibility is good and the iron content is low. 3. High grading accuracy: adopt horizontal type multi-turbine variable frequency grader. Each rotor can be changed by variable frequency in speed and does not need the secondary air selection grading and can be arbitrarily adjusted within 80-1500 mesh. 4.Convenient maintenance: the main engine reducer, grinding wheel and hydraulic cylinder each has a corresponding external hudrodynamic lubrication station to reduce the maintenance work and production delay and breakdown loss. 5. Reliable sealing: the system works under negative pressure. There is no flying dust and the workshop is clean and environmental. 6. Long service life of the quick-wear part: the surface of the grinding wheel and grinding ring adopts high-quality wear-resistant materials with long service life and small erosion. 7. Environmental protection: small vibration, low noise, excellent integral sealing and no flying dust. -
The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD 1720 specifications: Ring diameter: 1720 mm Roller size: 510*300mm Center speed: 92.5r/min Max feeding size: 30mm Final product size: 80-400mesh Capacity: 5-32t/h Dimension: 12500*12250*10400mm Total weight: 48ton The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
1.1 Product features This series of ball mill is a new type of ball mill improved on the bases of old mill. It has the following features. 1.1.1 Large diameter double row self-aligning roller bearings are adopted instead of the original sliding bearing, greatly reducing the friction and making the mill start up easily. It saves power 10-15% than the old mill. 1.1.2 It maintains the end cover structure of common mill, with large-caliber feeding and discharging openings, which realizes large processing capacity. 1.2 Notes for ordering While making selection, the customer should specify the rotating direction and discharging mode of the ball mill. The bearing type can be changed as required by the customer.
Gusu machinery ball mill machine is the ideal machine for ensuring efficient and uniform refinement of chocolate and similar masses with relatively low fat contents. Though this ball mill machine can be used as a stand-alone refining mill (set after mixing machine), its features are best put to use when it is combined with our chocolate conche machine, whether installed separately or as part of a comprehensive, compact unicom system. The chocolate paste is refined through the combined spinning of the two main shafts fitted with discs and the alloy beads located in the milling tank. The design and distribution of these components forces the mass (pumped upwards) to remain in the mill tank as long as needed, thereby allowing for the required reduction in fine particle size (20-25m) while ensuring the homogenous distribution thereof
We are in trading business like building materials, industrial supplies, safely products , oil and gas machineries, electrical and electronics.
Used excavators and used wheel loader, used printing machine.
Used And Cars, Trucks, Vans, Suv's, And Construction And Agricultural Machinery And Spare Auto Parts.
