LM900 specifications: Grinding diameter: 900 Production: 1-10t/h Input size: less than or equal to 10 mm Moisture: less than or equal to 6% Final product size: 80-1500 mesh Main unit power: 132kw LM900 features: 1. High level of automation: the equipment adopts PLC control system to uniformly control. The system is safe, sensitive and reliable. 2. Excellent powder quality. It adopts superfine pulverizing and material layer grinding principles, the powder solubility is excellent, the dispersibility is good and the iron content is low. 3. High grading accuracy: adopt horizontal type multi-turbine variable frequency grader. Each rotor can be changed by variable frequency in speed and does not need the secondary air selection grading and can be arbitrarily adjusted within 80-1500 mesh. 4.Convenient maintenance: the main engine reducer, grinding wheel and hydraulic cylinder each has a corresponding external hudrodynamic lubrication station to reduce the maintenance work and production delay and breakdown loss. 5. Reliable sealing: the system works under negative pressure. There is no flying dust and the workshop is clean and environmental. 6. Long service life of the quick-wear part: the surface of the grinding wheel and grinding ring adopts high-quality wear-resistant materials with long service life and small erosion. 7. Environmental protection: small vibration, low noise, excellent integral sealing and no flying dust. -
HGM148 ultrafine powder grinding mill specification: Ring diameter: 1032 mm Layer: 4 piece Roller Qty: 36 piece Input size: 20 mm Final product size: 3-35 um Main unit power: 132 kw Screw feeder power: 4 kw Blower power: 75 kw Blower volum: 12292-14643 m3/h Blower pressure: 12321 Pa Main unit speed: 200 r/min Classifier speed: 500-2900 r/min Capacity; 800-5000 kg/h Main unit weight: 14.2 ton Pulse dust filter area: 256 m2 Range of application: HGM Ultrafine Powder Grinding Mill is a new type grinding equipment with optimum structural design developed for the ultrafine powder industry by our company. it is applied to the processing of nonmetallic minerals with the water content less than 10% and the Moh's hardness under6, such as calcium carbonate, talcum, barite, wollastonite, feldspar etc. It is mainly composed by feeding machine, main engine, grader, pulse dust collector, high pressure positive blower, electronic controlled device and other parts. Technical features: 1. Reliable operation of the grinding chamber: compared with common grinder, this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, therefore, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. Compared with the same type machine, it has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost.
HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motor kw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 First produced in the country80-400 meshes Power consumption reduced by over 30 percent. The rival for the hard material The HDB German grinder breaks through the limit that the ordinary grinder can only mill the materials of Mohs hardness 7 or less, and can grind the materials with Mohs hardness 6-9, and the foundation is simple, the vibration is small, and the power consumption is low Technical structure features 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on.
HD2500 high pressure raymond grinding mill Specifications: Ring diameter: 2500mm Roller size: 600*300 mm Center speed: 70 r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300 mm Total weight: 75t Advantages: The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features : 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�?Patent product is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD 1720 specifications: Ring diameter: 1720 mm Roller size: 510*300mm Center speed: 92.5r/min Max feeding size: 30mm Final product size: 80-400mesh Capacity: 5-32t/h Dimension: 12500*12250*10400mm Total weight: 48ton HD1720 feature: 1.Reduce the roller and vibrate and improve the production. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, acheive the application of oil once, use for 30-45 days. 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved. 5.Higher Accuracy powder Classify, without coarseness missing. 6.High efficiency and energy-saving centrifugal blower. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HGM148 ultrafine powder grinding mill specification: Ring diameter: 1032 mm Layer: 4 piece Roller Qty: 36 piece Input size: 20 mm Final product size: 3-35 um Main unit power: 132 kw Classifier power: 30 kw Screw feeder power: 4 kw Blower power: 75 kw Air comprassor power: 11 kw Blower volum: 12292-14643 m3/h Blower pressure: 12321 Pa Main unit speed: 200 r/min Classifier speed: 500-2900 r/min Capacity; 800-5000 kg/h Main unit weight: 14.2 ton Pulse dust filter area: 256 m2 HGM Technical features: 1. Reliable operation of the grinding chamber: this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. It has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost.
MR 128 Specifications: Input size: 10mm Final product size: 325-1500mesh Main motor: D97kw Capacity: 1-6.5t/h Total weight: 26.5ton Power: 225kw Dimension: 13*5*8m Main features: 1.Wide range of processing materials, so far, it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic 2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders 3.It is easy to maintain, service, replace, repair the vulnerable parts, the time of repair is just half day 4.The Power consumption is low while the produce is high, pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole processing, and Quieter room is equipped to reduce the noise pollution 5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro powder The application scope: 1.chemical engineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on, All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6 2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of trees 3.Can feed fully with powder such as coal fly ash.
HD 2500 specifications: Ring diameter: 2500 mm Roller size: 600*300mm Center speed: 70r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300mm Total weight: 75ton Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HGM148 ultrafine powder grinding mill specification: Ring diameter: 1032 mm Layer: 4 piece Roller Qty: 36 piece Input size: 20 mm Final product size: 3-35 um Main unit power: 132 kw Classifier power: 30 kw Screw feeder power: 4 kw Blower power: 75 kw Air comprassor power: 11 kw Blower volum: 12292-14643 m3/h Blower pressure: 12321 Pa Main unit speed: 200 r/min Classifier speed: 500-2900 r/min Capacity; 800-5000 kg/h Main unit weight: 14.2 ton Pulse dust filter area: 256 m2 Range of application HGM Ultrafine Powder Grinding Mill is a new type grinding equipment with optimum structural design developed for the ultrafine powder industry by our company. it is applied to the processing of nonmetallic minerals with the water content less than 10% and the Moh's hardness under6, such as calcium carbonate, talcum, barite, wollastonite, feldspar etc. It is mainly composed by feeding machine, main engine, grader, pulse dust collector, high pressure positive blower, electronic controlled device and other parts. Technical features: 1. Reliable operation of the grinding chamber: compared with common grinder, this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, therefore, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. Compared with the same type machine, it has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost.
HGM200 ultrafine powder grinding mill specification: Ring diameter: 1400 mm Layer: 4 piece Roller Qty: 52piece Input size: 20 mm Final product size: 3-35 um Main unit power: 200 kw Classifier power: 55 kw Screw feeder power: 3 kw Blower power: 132kw Air comprassor power: 15 kw Blower volum: 28000-35000 m3/h Blower pressure: 7800-8500 Pa Main unit speed: 180 r/min Classifier speed: 500-2900 r/min Capacity; 1800-12000 kg/h Main unit weight: 25ton Pulse dust filter area: 358 m2 Technical features: 1. Reliable operation of the grinding chamber: compared with common grinder, this HGM Series Grinder does not have antifriction bearing and bolt inside of the grinding chamber, so problem caused by the bearing and other sealing element will not occur and the problem of machine failure caused by the loose bolt can be avoided. 2. Long time used of the quick-wear part: all the quick-wear parts adopt high-quality wear-resistant materials. 3. Convenient maintenance: HGM series ultrafine main engine has shifting unit and does not need hoist the grader, therefore, the maintenance is convenient and efficient. 4. Double support rigid structure: the grinding roller and grinding ring will not move. 5. All-around feeding and high efficiency. 6. Compared with the same type machine, it has the features of small vibration, convenient maintenance, highly reliable quick-wear part, low operation cost. -
