Automated dry mix mortar production line consists of sand drying system, raw material storage silo, aggregate and additive weighing system, mixing main machine, automatic packaging system and centralized control cabinet. Production from 5-10 t/h to 50t/h. Main Features 1. It features magnificent appearance, good quality, high productivity and accurate mortar proportioning. 2. The dry mix mortar production line uses a centralized control system, making the equipment easy to operate. 3.According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2. 4. We can provide one-stop service from design to installation according to our customers' specific requirement.
Type of Machinery we deal with: Dozers Forklifts Loaders Compactors Road Rollers Dump Trucks Concrete Machinery We are willing to support with our expert technical team and product sourcing team to be able to supply, install and commission on site at a short span which makes our clients come back to us
Cummins engine and parts generator set we are Remanufactured Engine Producer of Cummins Inc. Type Inline 6 cylinders, water-cooled, four strokes, electronically-controlled high pressure injection BoreÃ??stroke (mm) 130Ã??163 Displacement(L) 13 Aspiration charged, inter-cooled Maximum power(Hp/kw) 575/429 Maximum torque(Nm) 2300 Control system ECM Fuel system BOSCH High pressure common rail Emission certification NS III/EU Stage IIIA Dry weight (Kg) 1190 Length Width Height(mm) 1367 969 1182
Type Inline 6 cylinders, water-cooled, four strokes, electronically-controlled high pressure injection Bore stroke (mm) 114 145 Displacement(L) 8.9 Aspiration charged, inter-cooled Maximum power(Hp/kw) 360/264 Maximum torque(N·m) 1500 Control system ECM Fuel system BOSCH High pressure common rail system Emission certification NS III/EU Stage IIIA Dry weight (Kg) 774 Length Width Height(mm) 1240 780 1185
Cummins engine and parts generator set we are Remanufactured Engine Producer of Cummins Inc. Type Inline 6 cylinders, water-cooled, four strokes, electronically-controlled high pressure injection Bore stroke (mm) 107124 Displacement(L) 6.7 Aspiration charged, inter-cooled Maximum power(Hp/kw) 260/194 Maximum torque(N·m) 990 Control system ECM Fuel system BOSCH High pressure common rail system Emission certification NS III/EU Stage IIIA Dry weight (Kg) 520 Length Width Height(mm) 1150 810 910
Cummins engine and parts generator set we are Remanufactured Engine Producer of Cummins Inc. Type In-line 6 cylinders, water-cooled, four strokes, electronically-controlled high pressure injection Bore�?stroke (mm) 107�?124 Displacement(L) 4.5 Aspiration charged, inter-cooled Maximum power(Hp/kw) 160/119 Maximum torque(N�·m) 624 Control system ECM Fuel system BOSCH High pressure common rail system Emission certification NS III/EU Stage IIIA Dry weight (Kg) 381 Length Width Height(mm) 900 702 880
Jining Debons Construction Machinery Co., Ltd. is located in Jining City, Shandong Province. Debons is specialized in KOMATSU track adjuster assembly, cylinder, yoke, final drive, swing machinery, pins and bushings, electronic parts,excavator bucket,,radiator operator�¢??s cabin , hydraulic parts and CATERPILLAR/HITACHI travel gear box , track adjuster assembly and so on... We are provding 7x 24 hours of technical support and equipment warranty. From the date of availability year, the equipment warranty period is 6 months after sale. After the warranty expires , we will provide technical support for life.Scientific management,great technique,advanced machine and perfect quality guarantee system ensure the high quality. We expect to cooperate with our friends all over the world and make a better future together.
Item Specification Paint Tank Stainless Steel Tanke with 100 Kgs. Capacity Heating System Fire Nozzles, Gas Meter, LPG Supply, Valves, Stove, and Pipe. Tank Temperature Temperature Gauge 30 C - 400 C to maintain the uniform temperature of the material. Marking Manual Screeding Pointer Guide Front Mounted Pointer Guide adjustable Accordingly Standard Marking Shoe 100 mm and 150 mm marking shoe ( High Temperature, Oxidation and Deformation resistance ) Marking Thickness 1.5 - 3.0 mm (Adjustable to 3.5mm) Marking Shoe Optional 50mm / 80mm / 100mm / 120mm /150mm / 200mm / 250mm / 300mm / 500mm (as per requirement) Glass Beads Storage Box Capacity :- 15 Kgs. Tool Box Tool Box Kit & Storage etc. Net Weight 190 kgs (Approx) Gross Weight 260 - 280 kgs (Approx.) Wooden Box Dimensions (CMS) 140 X98 X 126 (LxWxH) Packing Type Wooden Box (Standard)
JZ250 small solid clay bricks making machine JZ250 is our smallest clay brick machine. It consists of three parts non-vacuum extruder, strip cutter and brick cutter. You can build your own factory with this machine only. JZ250 small solid clay bricks making machine parameters Model Power KW Auger Dia. MM Capacity pcs h JZ250 11 150 1000 1500 We, professional brick equipment manufacturing enterprise that can make clay brick machines, interlocking brick machines, cement block machines, and clay tile machinery
Features Carbon Fusion (CX) construction keeps things light with 2 layers of carbon, multiple layers of fiberglass and unidirectional carbon tape applied to a medium-density EPS core This vacuum-bagging process ensures the maximum bond is formed without an excess use of epoxy resin Generous size-to-volume ratio provides loads of buoyancy, boxy high-volume rails and a functional shape for great usability across a range of conditions Well-balanced single fin provides a high single-side stroke rate on flatwaterâ??ideal for progressing paddlers because you won't need to switch sides as often Add fins to the FCS II side plugs to enhance turning and control when riding waves Simple flat-to-double concave bottom helps the board accelerate quickly and maintain amazing glide in flatwater Subtle lift through the tail allows the board to maneuver smoothly when riding waves Deck traction with back foot kick and arch bar helps prevent slipping off the board Comfortable cavity handle for convenient transportation to and from the water Additional nose plugs let you create a forward storage zone, plus a bonus nose plug for mounting a GoPro
With advanced design, it is used for grouting or spraying pu, resin or other waterproof &leakage stoppage. The mortar spraying machine is suitable for: expansion joint leakage, settlement joint leaks, subway, tunnel leakage, leakage of dam leakage, ground level ground, cracks, empty drum reinforcement , indoor and outdoor coating, cement mortar spraying, dry mortar spraying, putty powder coating, waterproof grouting and surface spray coating, waterproof coating, grouting, smallpox spraying, wall painting, coating, landscape painting, embossment effect paint spraying, spraying, arts and crafts emulsion paint, really stone paint, spraying the rockery, sculpture painting, spraying sound-absorbing material.
Product Code Product Description PRS-CM0075 Manuel Mortar Mixer, 220-240 V 50-60 Hz PRS-CM0075/110 Manuel Mortar Mixer, 110 V 60 Hz PRS-CM0076 Spare Bowl for PRS-CM0075 and PRS-CM0085, 5 L PRS-CM0078 Spare Beater for PRS-CM0075 and PRS-CM0085 STANDARDS : EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305, AASHTO T129, T131, T162 The PRS-CM0075 Manual Mortar Mixer has a 5 liter (approx.) capacity, it has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. The user can choose the speeds easily by using the switch fitted to the machine. There is a sand filling apparatus on the mixer to pour sand easily. The bowl and beater are easily fitted and removed from mixer. The Manual Mortar Mixer is supplied complete with; Bowl, 5 L (approx.) Beater Dimensions 300x555x610 mm Weight (approx.) 54 kg Power 200 W
Automatic Cement Compression & Flexure Testing Machines Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
Open Base Triple Cover Concrete Spacer machine adopts hydraulic transmission, integrated hydraulic system, electrical control and realizes a high degree of automation, low noise, long service life, convenient operation, etc. Open Base Triple Cover Concrete Spacer machine mainly produces circular perforated or stirrup perforated cement blocks. It can stack directly after molding, which saves plate greatly. Moulding Picture The final products can be used after compression moulding and curing naturally.
Constructions equipment (Hyundai) - material handler -Telescopic dipper - Front shovel - Rail guide - High reach demolition - Super long reach - Log loader - LOADER LOG GRAPPLE - LOADER PALLET FORK - Excavators- - Large Excavators - Medium Excavators - Small Excavators - Mini Excavators - Loaders- - Skid loaders - Backhoe loaders - Wheel loaders
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008 2. Main Technology(here take Nature gypsum rock as example) Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O) After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system. 3.Payment conditions: A. Payment terms: 30% T/T in advance; 70%L/C or T/T B. We can provide quality guarantee; C. Kunlun bank account available to make convenient for Iranian client National Standard of Calcined Gypsum Standard No.: GB/T 9776-2008 Scope of application: Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive. The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades. Classification: It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength). Composition: β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008 2. Main Technology(here take Nature gypsum rock as example) Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O) After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system. 3.Payment conditions: A. Payment terms: 30% T/T in advance; 70%L/C or T/T B. We can provide quality guarantee; C. Kunlun bank account available to make convenient for Iranian client National Standard of Calcined Gypsum Standard No.: GB/T 9776-2008 Scope of application: Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive. The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades. Classification: It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength). Composition: β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008 2. Main Technology(here take Nature gypsum rock as example) Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O) After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system. 3.Payment conditions: A. Payment terms: 30% T/T in advance; 70%L/C or T/T B. We can provide quality guarantee; C. Kunlun bank account available to make convenient for Iranian client National Standard of Calcined Gypsum Standard No.: GB/T 9776-2008 Scope of application: Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive. The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades. Classification: It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength). Composition: β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
Capacity 100,000m2/y-450,000m2/y Automation Full automatic Fuel Natural gas, heavy oil, coal and diesel Drying method Dry by air Hot air stove drying system Main raw materials Gypsum powder, water Product dimension Thickness: 70mm-200mm Width: 300mm-500mm( adjustable) Length: 620mm,666mm We can design and manufacture products of other dimensions as clients'special requirement Standard of product quality In conformity with national standard JC/T698-2010
Capacity 100,000m2/y-450,000m2/y Automation Full automatic Fuel Natural gas, heavy oil, coal and diesel Drying method Dry by air Hot air stove drying system Main raw materials Gypsum powder, water Product dimension Thickness: 70mm-200mm Width: 300mm-500mm( adjustable) Length: 620mm,666mm We can design and manufacture products of other dimensions as clients'special requirement Standard of product quality In conformity with national standard JC/T698-2010
