Thermoplastic Road Marking Machine

Handpush thermoplastic road marking machine's floor knife adopts imported hard tungsten steel knife-head with high viscidity and abrasion resistance, which makes the line edge facile and straight. 1.Marking shoe: Marking shoe and paint tank are integrally designed and hung inside frame of the chassis.The discharging port adopts double-closure to avoid leaking. Screeding knife made of fire resistance, abrasion resistance and oxidation resistance adopts screeding structure to make good quality markings, which ensures the head of marking more regular. Sieve in the paint tank effectively removes the impurity in it. The capacity of the shoe:65kg 2.Heating system: Petroleum liquified gas tank is used for respectively gas to front and back two row nozzles and outside inflame gun, whose power is controlled by different valves. The valves and gas tools adopt imported parts, and connection pipes are imported rubber pipes with heat and pressure resistance. 3.Glass beads bin: With gear transmission, the dispensing gear definitely rolls. Equip with automatic clutch device synchronous with screeding shoe; bin with windows can check the quantity of glass beads in time. The capacity: 30kg. 4.Chassis: Firm welding frame, the surface has been galvanized, chrome-plated or high temperature treatment. Equip with heat resistance (350), abrasion resistance modified rubber with the diameter 200mm, which can effectively prevent tackless or deformation after long time of high temperature work. The wheel nave is made of refined steel, and equip with high speed imported bearing, which makes the whole machine lighter and more convenient. 5.Handle bar: Individual design conforms to the requirements of human body project. The operation height can be adjusted according to the needs of the operator.

It is the most typical cold paint road marking machine, oftentimes called cold paint striper or cold striping machine as well, is widely used for spraying cold-solvent paint, water-based paint and other single-component paint, can be applicable to various construction environments as well. It has the characteristics of stable performance, flexible operation and convenient construction and so on. Engine 5.5HP Honda gasoline engine Marking method High pressure airless spraying Paint pump flow 9L/min Rated maximum working pressure 20Mpa Paint pump and control mode Piston reciprocating, single pump Applicable paint Cold-solvent, water-based and other single-component paint Marking width 100-600mm adjustable Spray gun quantity 2 manual fixed spray gun Dimension 1780x980x1200mm Weigh 150Kg

Supplier: Thermoplastic road marking equipment & thermoplastic road marking machine.
Services: Manufacturers

Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.

This machine is auxiliary equipment used in road construction activities, used in zebra crossings (pedestrian crossings), arrowhead and line direction of guiding, entrances and exits to a highway. It is a hand pull marker. 1. Bead tank of dismountable frame, convenient cleaning and adjustable. 2. Rise and fall handle design; allow the handle to be adjusted to the operatorsí» desired heights. 3. Integrated thermoplastic bucket and coating tank, advances structure design, it is airproof and does not leak. Hard melt alloy grounded knife. 4. There is a filter screen in the feeding port, which can effectively remove the impurity in paints. 5. six line guide rod easy to observe Volume: 1250X750X1000mm Weight: 145kg Capacity of coating tank: 50kg Line width: 400/450mm Line thickness: 1.5-3.5mm Protruding height: 3-7mm Capacity of bead tank: 20kg

Supplier: Road marking machine, pavement paint road marking machine, thermoplastic road marking machine

This machine not only has the capability of being a hand push marking machine but also has hydraulic pressure drive equipment by itself that enables increased speed of line construction, and results in reduced labor force for working in your projects. It is the best choice for large areas or mountainous regions of highway line marking construction and more advances than hand push marking machines. 1. Auto-moving the direction of forward or turn over, steeples speed regulating 2. Hydraulic pressure drive powerful, speed fast of construction and high efficiency of working. 3. Stable welded profile frame construction, light and agile 4. Safety warning light and night light. 5. Special materials of marking bucket, heat-resistance, anti-cauterization, hard melt alloy grounded knife, active design 6. Same-step sprinkle the bead, convenient construction, adjusted quantity of sprinkle for saving the beads. Engine: HONDA 5.5HP gasoline engine Volume: 1400X820X1040mm Weight: 200Kg (standard with 150mm bucket) Width of thermoplastic bucket: ordinary mode: 150/200/300mm Purchase mode: 100/400/450mm 120/240mm Capacity of coating tank: 100kg Capacity of bead tank: 10kg- Line thickness: 1.0-2.5mm Moving speed: 0-10km/h Max degree of climbing: 15degree Control direction: locked rear wheel, easily and precisely adjust alignment to your exact requirement Heating duel: liquefied petroleum gas (carry the per-gas tank of 10-15kg) Type of sprinkle: screed method

Supplier: Thermoplastic road marking machine, cold paint road marking machine, thermoplastic road marking paint
Services: Export, transportation, shipping
Buyer:

The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold paint road line marking, which forms coating relying on chemical reaction instead of physical drying such as temperature falling or solvent ( water-based) volatilizing. The two component road marking machinery can be divided into swing structure type, screeding flat-line type and high-pressure airless spraying type according to different paints and different construction shapes. Meanwhile, these three types road lines painting can be divided into marking vehicle, driving type line marking and self-propelled type according to different degree of automation, functional configuration, construction quality and efficiency. As for the two-component marking vehicle, its truck platform and electronic control system are basically the same with the airless road marking truck except its functional module. 3600*3200*1500mm(l*w*h)