Features
Experience all the stunning 3D immersive stereoscopic visuals.
Enjoy 120 inch HD virtual image at 4 meter away privately.
Independent Dual screens create incredible theater environment.
Adjustable pupil distance of the eyes for perfect watching.
Conform to HDMI & HDCP.
Control buttons and Connectors
Control Button: Power, Brightness, Volume + / -.
Signal input: HDMI Type-A.
Earphone Jack: Stereo 3.5mm dia.
Power input: USB connector.
Specification
Resolution: 1280 x 800 x RGB, WXGA LCD Panels.
Aspect Ratio: 16 : 9.
Power Consumption: 3.5 Watt.
Dimension (W x H x D): 170 x 57 x 76 mm (6.7 x 2.3 x 3 in).
Weight: 250 gm (8.8 oz).
Features
Comfortable 3D image through two individual panels.
Android Operation System.
Enjoy virtual 120 inch high resolution virtual image at 4 meter away privately.
WiFi Internet operation with built-in battery up to 3 hours.
Individual adjustable interpupillary distance and myopia focus.
Support Miracast, connect to your mobile phone wireless.
Control buttons and Connectors
Control Button: Power, Up / Dowm / Right / Left / OK, Home
2D/3D Right-Left Selection
Micro-USB x 1 (OTG)
USB x 1 ( Host )
TF Card x 1: Support 64GB
Earphone Jack: Stereo 3.5mm dia x 1
Power input: Through Micro-USB
Build-in 2.4G wireless mouse module (option item)
Specification
Storage: 8GB, (Optional 16GB)
Resolution: 1280 x 800 x RGB x 2 (2 panels)
Contrast Ratio: 1000 : 1
Refresh Rate: 60Hz
Optical Distoration: Less than 1.5%
FOV: 56o each eye
Myopia focus adjustable: upto 500 o
Adjustable interpupillary distance: 60 â?? 70 mm
Gyro-Control: 6 axials
WiFi: Built-in 802.11b/g/n
BlueTooth: 4.0
Battery: Li-Polymer 2800mAh
Main Dimension (H x D x W): 57 x 80 x 173 mm
Weight: 300g
Storage: 2 x m.2 ssd, support raid
1 x 2.5" hdd sata g3
Audio: 2 x speaker
1 x subwoofer
Io interface:
2 x usb2.0 port
2 x usb3.0 port
1 x 2 in 1 audio&mic jack
1 x hdmi2.0 port
1 x rj45 lan port
1 x 4 in 1 card reader(sd, sdhc, sdxc, mmc)
1 x dc jack
Communication: 10/100/1000mb ethernet lan
Wireless 802.11ac, dual band + bluetooth 4.0 combo module
Storage: 2 x m.2 ssd, support raid
1 x 2.5" hdd sata g3
Io interface:
2 x usb2.0 port
2 x usb3.0 port
1 x 2 in 1 audio&mic jack
1 x hdmi2.0 port
1 x rj45 lan port
1 x 4 in 1 card reader(sd, sdhc, sdxc, mmc)
1 x dc jack
1 x dp jacksupport 1080ïdon't support 4kï
Communication: 10/100/1000mb ethernet lan
Wireless 802.11ac, dual band + bluetooth 4.0 combo module
KYN28A-12 indoor AC metal armoured pull-out switch cabinet is suitable for three-phase AC 50/60Hz power system, for receiving and distributing power, and for controlling, protecting and testing the circuit. APG epoxy casting and reliable solid insulated bus technology are used in the interior of the product for full insulation design. It has good electric field distribution measures. It is a miniaturized switchgear with advanced technology, stable performance, reasonable structure, convenient use, safety and reliability.
The switchgear meets IEC298, GB3906-91. In addition to be used with domestic VS1 vacuum circuit breaker, it can be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc. It is truly a power distribution deviece with good performance.
In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.
CHARACTERISTICS
1. Bus bar adopts thermal shrinkable insulating material or epoxy coated insulation method to optimize the shape of the electrode, make the cabinet structure compact and reduce the occupied area.
2. The cabinet body is made of high-quality cold-bonded steel plate and imported aluminium-zinc coated sheet metal, which are processed by NC sheet metal and connected by high-strength bolts, nuts and rivet nuts.
3. The switchgear equipment has other primary schemes such as cable in-out line, overhead in-out line, bus connection, isolation, voltage transformer, lightning arrester and so on.
4. Insulation boards are installed in bus cabinet, handcart cabinet and cable cabinet, which greatly improves the insulation level.
5. The interlock between main switch, handcart, ground knife switch and cabinet door adopts mandatory mechanical door lock mode to meet the five-proof function.
6. Friendly man-machine interface makes switchgear operation programmable and formulaic, and the operator can see it at a glance.
7. The main wiring scheme can reach more than 160 kinds, and has strong structural adaptability, which can meet the needs of different users.
Greetings from JVS Electronics!!!!
JVS Electronics is a Bangalore based Indian company engaged in the design, development and manufacture of Embedded power system protection, automation and control products. We have many International patents and the R&D unit constantly works on futuristic technologies.
COMPANY PROFILE
We, JVS Electronics Private Limited, was incorporated in the year 1991, for the development and manufacture of
Control, Protection and Monitoring devices required for protecting electrical equipment.
VISION :
To be a globally Acknowledged Value company.
MISSION:
As an organization of excellence in power systems through â?? State of Art products & Solutions, Value
Enhancement to customers, suppliers, partners, stakeholders, and employees, and Genuine concern for
environment.â??
To respond to customer's varying needs with agility and quality.
JVS is an ISO 9001 company. All the products which are included in our present range of manufacture have
been type tested as per IS/ IEC specifications at CPRI, Bangalore.
The range of products that are manufactured are microprocessor based numerical protective relays,
electromechanical auxiliary & tripping relays,Annunciators, Hooters and instruments required for the
protection of electrical distribution systems.
In the last twenty years, we have supplied well over 2,50,000 relays and devices to various users in the
country and all of them are giving satisfactory service. We have formal approvals from all the Electricity
Boards like KPTCL and distribution companies, APTRANSCO and distribution companies of AP,
TNEB,KSEB, MSETCL & DISCOMs, GETCO & DISCOMs, GRIDCO, RRVPNL & DISCOMs, UPPTCL
& DISCOMs, HPSEB, J&K Power Development Department, WBSEB,CESC, etc for the use of our relays
up to 220kV systems. Our relays have been purchased by almost all the leading switchgear manufacturers.'
aproximitely description dediceted for RS-S
Switchgear design:
Material - aluminum sheet.
Connection method - welding or twisting.
Varnishing - covered with polyester powder varnish in the basic color RAL 7035 or other colors on request.
Roof
Ventilation - gravity labyrinth.
Bottom - cable channel, flat plate or bottom
Installation of equipment - angles enabling the adjustment of the depth of equipment installation.
Doors - double-sided, separate on each part, opened at an angle of 180 �° with a blockade.
Lock - master key locked with a padlock or system insert.
Hinges - internal stainless.
Mounting - galvanized post clam.
KYN28 drawout type indoor metal-enclosed switchgear assemblies
Rated voltage:12KV,24KV,35KV
Rated current:200A ,630A,1250A,2000A,3150A
Breaking capacity:25KA,31.5KA
KYN28 indoor metal-clad switchgear is a complete power distribution device for 3.6~24kV,3-phase AC50/60Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc.,it is truly a power distribution device with good performance.
In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.
The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, the SF6 insulated switchgear could communicate with the control center, measure the cable voltage, current, etc, and monitor the working status of switches.
BKRM6- 40.5 series of ring main unit is SF6 gas- insulated metal common tank enclosed switchgear, consisting of load break switch unit, load break switch fuse combination electrical unit, vacuum circuit breaker unit, and the incoming line unit of bus. It adopts a range of advanced technologies and materials, with excellent electrical and mechanical properties, less affected by environment and climate, in small size, easy to install easy to operate, with no need of maintenance, and can be flexibly combined. Its clear and intuitive design ensures simple and direct operation, the feeder's connection capacity is large, suitable for a variety of wiring systems.
Besides,we can replace the SF6 gas with nitrogen(N2 gas) that it will become a environment protection green gas insulated switchgear. The green gas insulated switchgear safer and environmentally friendly more than SF6 GIS and it will replacing SF6 GIS in the future.
KYN28-12 removable AC metal-clad switchgear (short for panel as below) is a new product. It will be a substitute for old fashioned metal-enclosed switchgear, such as KYN-12, JYN-12, GFC-12, etc.
The panel applies to 3.6~12kV 3 phase AC 50Hz network for receiving and distributing power energy and also for control, monitor and protection. It accords with standard of IEC62271-200, IEC60694, GB3906.
The newly introduced and developed large current and high breaking switchgear can also be used as a high- voltage generator export.
1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine
2.Epoxy resin mixing device Application:
epoxy resin mixing device is applicable for mixing epoxy resin,hardener,and silica powder,to produce products such as transformer, bushing, post insulator, contact cover, sensor, various supports, etc.
3.Main technical specification
Strirring power
Strirring Speed
Vacuum pump power
Worm gear screw jack
Vacuum degree
3 kW
21-118 m/min
1.1KW,2800r/min
0.37 kW
1.5 mbar
Dimension of mixer device
Weight of mixing device
Pot capacity L
Machine dimension
Machine weight
We are involved in offering high quality of Switchgear components. Our range finds diverse application in various Unit and industries. Our offered components are checked in terms of quality for assuring its quality and durability. We Switchgears Components these components by our experts by utilizing supreme class material as per the technological advancements. These components can be availed in several packing options in large amount from us within the stipulated time-frame by our customers
I. Summarization
KYN28A-24 indoor AC metal armoured pull-out switch cabinet is suitable for three-phase AC 50/60Hz power system, for receiving and distributing power, and for controlling, protecting and testing the circuit. APG epoxy casting and reliable solid insulated bus technology are used in the interior of the product for full insulation design. It has good electric field distribution measures. It is a miniaturized switchgear with advanced technology, stable performance, reasonable structure, convenient use, safety and reliability.
â?¡.CHARACTERISTICS of China High Voltage Switch Cabinet
1. Bus bar adopts thermal shrinkable insulating material or epoxy coated insulation method to optimize the shape of the electrode, make the cabinet structure compact and reduce the occupied area.
2. The High Voltage Switch Cabinet body is made of high-quality cold-bonded steel plate and imported aluminium-zinc coated sheet metal, which are processed by NC sheet metal and connected by high-strength bolts, nuts and rivet nuts.
3. The switchgear equipment has other primary schemes such as cable in-out line, overhead in-out line, bus connection, isolation, voltage transformer, lightning arrester and so on.
4. Insulation boards are installed in bus cabinet, handcart cabinet and cable cabinet, which greatly improves the insulation level.
5. The interlock between main LOAD SWITCH, handcart, ground knife switch and cabinet door adopts mandatory mechanical door lock mode to meet the "five-proof" function.
6. Friendly man-machine interface makes switchgear operation programmable and formulaic, and the operator can see it at a glance.
7. The main wiring scheme can reach more than 160 kinds, and has strong structural adaptability, which can meet the needs of different users.
