We're excited to introduce a revolutionary Cape Reed Fireshield FRC 101 fire-retardant coating specifically designed to protect these unique building materials complying with British Standard BS476 part-3, European Standard EN13501-5 and (DCD) Dubai Civil Defense. This innovative product offers peace of mind and increased fire resistance for your home or business. With a simple application, you can gain: Enhanced fire protection: Our coating significantly reduces the flammability of timber and thatch, providing valuable time in case of a fire. Preserved aesthetics: The clear finish when dry ensures your structure's natural beauty remains untouched. Easy application: The user-friendly spray application makes treating your timber or thatch a breeze. Long-lasting protection: Enjoy years of fire resistance with a single application (depending on the specific product). User and Environment friendly. Enjoy no toxic elements water based intumescent fire retardant coating.
RTV insulator coating are silicone-based paints designed to protect underwater surfaces from fouling and corrosion caused by marine organisms. These coatings are often used in boats, ships, and other marine structures to inhibit the growth of algae, barnacles, and other organisms on underwater surfaces. RTV coated insulators are durable, long-lasting, and resist abrasion and water erosion, making them ideal for harsh saltwater environments. They provide a smooth and glossy finish that reduces drag and improves fuel efficiency in marine vessels.
The series of products are made of saturated carboxylpolyester resin, TGIC or HAA, rutile titanium dioxide ,which are the main raw materials.They have good UV resistance and play a good protection and decorative properties for the application of outdoor metal workpiece surface.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Heat transfer coating for photo or image transfer on wood. Acrylic-polyester nature, ready for use .....
Sublimation coating with acrylic-polyester nature ( in concentrate form ) for sublimation to wood and plywood. Other adhesives with 2 or more components, the mixture of they must be used within 4-5 hours. Unlike these, this concentrate does not mix with other components and is ready for use, can be used whenever needed even in small uses. This makes it economical. This is very easy to use it, with paint brush or paint roller . Sublimation coating with acrylic-polyester nature in paste form (concentrate). The concentrate is ready for use. For the decoration of different wood materials, such as wood board and plywood, through sublimation
Screen printing coating for sublimation on cotton. Recommended mesh number: 90 mesh - 110 mesh Drying with air (ventilated) kiln at 120-140 degrees Celsius (or hair dryer at medium temperature). The process is sample: 1. Print the coating 2. Dry (recommended ventilated kiln) 120 - 140 degrees Celsius for 2-3 minutes (or hair dryer in medium heat, or room temperature for 24 hours) 3. Sublimation at 180 - 182 degrees Celsius ( 355-360 F ) for 30-40 sec.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Our Company, Which Offers Special Solutions For Many Sectors With Its Special Formulas, Can Produce Roller Coating And Rubber-silicone Parts. Our Rollers Used In The Machines Of; Textile, Paper, Iron - Steel, Plastic Metal And Packaging, Printing, Corrugated Cardboard, Tin And Sheet Industry. Rollers Can Be Covered With Rubber, Silicone, Nitrile Coating. Rubber Coating; 18-98 Shore A, 70 Shore D Hardness Working In Environments From -60c To +250c Resistant To Various Environments; Solvent, Acidic & Alkaline Resistant To Chemicals & Oils In Different Types Friction, Abrasion, Weariness, Impact & Pressure Resistant Sectors Used; Textile Wood And Furniture Iron Steel & Galvanized Printing Press Mine Paper Corrugated Cardboard
Type:UV Gel Brand Name:LADISGEL Model Number:rubber top coat Place of Origin:Guangdong, China Certificate:SGS GMPC ISO MSDS Color:Clear MOQ:12pcs Volume:10 ml/bottle Smell:Odorless Soak off:EasilyLasting time: 3-4 weeksService:Sample+OEM Application:Lady's Nail Beauty Cure time:LED Lamp 30s UVLamp 2mins
Chlorosulfonation Polyethylene Anticorrosive Finish Chlorosulfonated polyethylene anticorrosive paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint. The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance. This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools. Advantages OF Chlorosulfonation Polyethylene Anticorrosive Finish Excellent corrosion and weather resistance Good adhesion to all types of metal and cement Excellent water resistance Good acid, alkali and chemical resistance Specification of Chlorosulfonation Polyethylene Anticorrosive Finish Type Solvent Solid Content 41% Mixing Ratio two components Part A: Part B=10:1 by weight Dry Film Thickness 30m per coat Specific Gravity 1.16kg/Liter Coverage Rate (Theoretical) 0.11kg/m2/30m 0.104L/m2/30m Drying Time Temperature 5 10 20 30 Dry to touch 40mins 30mins 20mins Dry Hard 6hrs 5hrs 4hrs Package 22kgs for one kit, part A 20kgs, part B 2kgs What is chlorosulfonated polyethylene coating? The chlorosulfonated polyethylene antifouling coating has excellent chemical resistance and acid and alkali resistance. Its old paint film can be dissolved by the solvent in the new paint film. Therefore, it is not necessary to remove the stubborn old paint film during maintenance, which reduces the maintenance cost. It is commonly used in anti-corrosion in pharmaceutical and chemical plants. As a paints factory, we will do our best to meet all the needs of customers.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Epoxy resin systems for treatment marble and stone, epoxy systems for art and decoration work, hardener epoxy and primers for top coating flooring and modification hardener epoxy .Manufacturers
Expired powder coating.
Hartalega paloma and coats.
Cti coating is the perfect protection system against freezing, thawing, fading, salts, alkalis, stains, heat, uv, chemicals and its twice the strength than normal concrete and about 40% cooler than other material able to stand up the extremes for home,commercial, industry applications indoor or outdoor .
Powder coating, warehouse shelf, powder coating powder.
Thermal insulation coatings.
Rust Preventive Products using Advance VCI Technology.
Epoxy-coated-deformed-Rebars.
