Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplier: Nitrogen generators,valves, radiator, towel radiator, heated towel rack, electric heater, cooling radiator, chemicals, coatings, industrial oils, standard parts and elements, precision machining parts, several types of racks and shelf systems , dried fruits, herbs
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
Supplier: Chemicals, agrochemical, organic chemical, industrial chemical, petrochemical products, agricultural chemicals, aromatic chemicals or chemicals & allied products, agri products, dry fruit, fresh fruit, and vegetables, sugar, basmati rice, ginger, dehydrated onion, potato, spices, pulses, banana, almonds, corn, fresh onion, peanuts, rice, sesame seeds, herbs, edible oils, milk, honey, himalayan salt, ghee, jaggery, sunflower oil, electronics and home appliances automobile spares and parts other: construction chemicals, cupboards, doors, gates, grills & windows, cement, enamel paint, fire bricks, refractory bricks, tiles, white cement, aluminum ingot, steel coil, texfiber, yarn, polyester yarn, nylon yarn, thread, fabric, jems ,jewelrym agro chemical, organic ,chemical, electronics and home appliances, automobile spares and parts
Supplier: Concrete admixtures, water proofing systems, industrial grouts, anti-corrosive coatings, protective and decorative coatings, concrete repair products, industrial floorings, concrete surface treatments, tile adhesives and joint fillers, joint sealant and vibration pad.
Services: We handle new installations / constructions apart from repair and revamping projects. Our services include:
òconsulting in selection of the right solution and products
òsupply of the materials
òinstallation services and execution
òproject management
Supplier: Jeans (denim) woven, knitted and rigid trousers, sorts, bermuda, shirt, jacket, ramper etc made in various weaves, weight, colors, dyed, treated & faded, washes (enzyme, ball stone etc ), chinos, varieties in weaves, color, washed, dyed, treated & design etc., formal shirts checks, stripes, solid colors, with special treatment like easy care, wrinkle free also available.
casual shirts, solid color, checks, stripes & printed etc., seasonal garment winter jackets, parka, vest, body warmer, inner wear, windcheater, rain wear etc.
Services: Manufacturer
Water Borne Peelable Resin PU-3018A Product Introduction PU-3018A is a protective resin made of water borne polyurethane dispersions, using high performance additives and advanced processing technology. The waterborne peelable coating made of this resin has bright color, and fine particle size, coated on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, with good protection, can form a continuous, uniform, strong protective coating on the surface of complex shapes, can isolate the erosion medium, protect the surface of the substrate not easy to be worn, abrased, scratched, meanwhile, moisture-proof, rust-proof, corrosion â??proof, improve the commodity value of coated products. Upon completion of the protection period, the film can be conveniently removed to restore the original appearance of the object. Physical Property ModelPU-3018ACompositionPolyurethane organosilicon copolymerAppearanceMilky liquid with blue shadeSolid content35�±2%PH7.1-8.0IonicityAnionViscosity (Brookfield 25â??)50-160mpa.s Performance Features High peeling strength, not easy to break High strength, good water resistance Excellent low temperature resistance, weather resistance, air permeability and moisture resistance, and universality of different substrates Applications All kinds of metal surface, for example, temporary protection of products such as automobiles and stainless steel appliances Temporary protection of all kinds of glass products Temporary protection of all kinds of plastic products Can be used as temporary protection for coating, ink coating Can be used as temporary protection for other products Application Guide Can be directly painted on the surface of the construction surface, or add the right amount of water after dilution Can be added talc, silica and other inorganic split materials Can also add resin-free pigment paste to do color temporary protection coating The peelable film dry completely, when it needs to be removed, please tear out a long mouth along the edge of the film, and then slowly peel the film from the coated surface with a force of about 4-5kg Packaging and Storage Condition 50KG, 120KG, 200KG plastic drum; Stored in a 100% light â??proof sealed container; Stored in a cool and dry place indoor at 5-30â??; Under high temperature or exposure, the shelf life will be significantly shortened; Shelf life is 12 months from the date of production under condition that the drum is not opened. Special Tips This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
