1.Products Description
Chemicals Product Polymeric Ferric Sulfate PFS
Polyferric sulfate (PFS) is an inorganic polymer coagulant with superior performance. Its morphological properties are yellowish, amorphous, powdery solid, and it is easily soluble in water. 10% (mass) of aqueous solution is reddish-brown transparent solution with hygroscopicity.
2.Specification
Product name ---------- Polyferric sulfate
Appearance ---------- light yellow powder
Fe3+ Content (%)------ 21%Min
Restore Substances ( Fe2+) Content% ---1.0% Max
PH(1% water solution)----2.0-3.0
Insoluble Substances (%) -----1.0 Max
3.Application
a.PFS is used in drinking water treatment
Polyferric sulfate can effectively reduce metal aluminum in drinking water, and can also remove bacteria, turbidity and chromaticity caused by corrosion of water supply pipes.
b.PFS is used in dyeing wastewater treatment
Polyferric sulfate can replace the traditional molecular iron salt and aluminum salt coagulant. Compared with traditional coagulant, the amount of polyferric sulfate is smaller and the chroma removal rate is higher.
c.PFS is used in Electroplating wastewater
Polyferric sulfate can be used as a coagulant and rutting agent in electroplating wastewater treatment. It is difficult for the complex to directly react with a coagulant such as polyaluminum chloride
d.PFS is used in papermaking wastewater treatment
Polyferric sulfate can be used as a coagulant instead of polyaluminium chloride, aluminum sulfate, etc. It can also be used for dewatering of paper sludge, which can achieve rapid flocculation and sedimentation.
4.Packing & Delivery
Packing method: 25kg plastic woven bag lined with polyethylene bag or as customer's
Naphthalene Sulfonate Formaldehyde Condensate (SNF), also known as Poly Naphthalene Sulfonate (PNS) and Formaldehyde Sulfonate Condensate (FDN), is a highly effective water reducer and superplasticizer commonly used in the construction industry to improve the workability and strength of concrete.
Key Properties:
High Range Water Reduction: SNF can significantly reduce the water content of concrete while maintaining its workability, leading to higher strength and durability.
Sodium Sulfate Content: Available in different grades based on Na2SO4 content for various markets:
Export grades: 5%, 10%, 18%
Domestic grades: 3%, 23%
Chloride-Free: Contains no chlorides, making it non-corrosive to steel reinforcement in concrete structures.
Non-Toxic and Safe: It is non-poisonous, odorless, and non-flammable, ensuring safe handling and use.
Applications:
Concrete Industry: Widely used in the production of high-performance concrete, precast concrete, and ready-mix concrete to enhance workability, reduce water content, and improve overall strength.
Cement Products: Utilized in various cement products to achieve desired performance characteristics.
224 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Sodium lignosulfonate
It is produced by reed as raw material and produced by low pollution technology,sodium
lignosulfonate is with good solubility, high surface activity and dispersing ability.
It is a sulfonate derivative contents benzoic acid and carboxyl.Itâ??s adhesion, dispersion and
chelation are widely used in various industries to improve its physical and chemical
properties, save costs and improve efficiency.
Mainly export for Concrete:
Polycarboxylate superplasticizer is a new type of water reducing agent. The water
reduction rate is generally around 20%, but it has high requirements for cement and sand of concrete.If the mud content in the sand is slightly larger, the polycarboxylate superplasticizer has a water reduction rate of 0.However, the technical team found that when using polycarboxylate superplasticizerâ??s dosage is 6% of weight with sodium lignosulfonateâ??s dosage 4%-6%,the water reduction rate will reach the most ideal water reducing ratio and the cost of concrete admixture is also the most economical.Because of the characteristics of calcium and magnesium ions in Sodium lignosulfonate, it is easy to occur precipitation and discoloration when mixed with polycarboxylate superplasticizer.
Other Application:
1. Concrete water reducer: it can adsorb and disperse cement and improve various
physical properties of concrete.
2. Coal water slurry additive: adding this product during the preparation of coal water
slurry can improve the output of high mill, maintain the normal condition of pulping system, reduce the power consumption of pulping, increase the concentration of coal water slurry, reduce the oxygen consumption and coal consumption, improve the efficiency of cold gas, reduce the viscosity of coal water slurry and achieve certain stability and fluidity.
3. Refractory and ceramic green body reinforcer: in the manufacturing process of large-size wall and floor tiles and refractory bricks, the raw material particles of green body
can be firmly bonded, and the dry green body strength can be increased by more than 20% - 60%.
4. Filler and dispersant for dye industry and pesticide processing: it can increase the
color power of dyes, color more evenly, and shorten the grinding time of dyes;
5. Filler, dispersant and suspending agent in pesticide processing: greatly improve the
suspension rate and wettability of wettable powder. 6. Binder for powder and granular materials: it can obtain good effects such as high strength, good stability and lubrication of molds in the balling of mineral materials.
7.Dilution dispersant and viscosity reducer in drilling: Improve the fluidity of crude oil
transportation and reduce energy consumption. In petroleum products, it is used as cleaning agent, dispersant, high alkaline additive, antirust agent, antistatic agent, emulsion viscosity reducer, wax elimination and anti wax agent, etc.
Technical Date Sheet:
Molecular Formula: Al(OH)3
H.S. CODE: 2818 3000
CAS No.:21645-51-2
EINECS No.:244-492-7
Fine Powder Aluminum Hydroxide
Introduction
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle
size distribution, low impurity content, good stability, high whiteness, uniform particle size and good
dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder
without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition
temperature of aluminum hydroxide is about 205 â??. Aluminum hydroxide flame retardant can
release a large amount of water vapor when heated. A large amount of water vapor can store heat
and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier
between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which
has no corrosion to metals. Usage
Aluminum Hydroxide 14-100um filler powder can be used for MMA and UP solid surface
and artificial marble that used for buildings and home decoration. Aluminum Hydroxide 1-10um flame retardant powder can be used for rubber hose, rubber
plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, electrical LDPE
cable material,LSZH wire compound,Silicone rubber,Silastic module,Foam
insulation,Paper-making,PVC industry,Pouring sealant,Shell of
car/phone/plane/computer,toothpaste friction agent, low-voltage insulation devices,glass fiber
reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant.
Package
H-WF-8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL.
Hydroxyethyl cellulose (HEC) is a non-ionic soluble cellulose ether derivatives that can coexist with many other water-soluble polymers, surfactants, and salts. HEC has the properties of thickening, suspension, adhesion, emulsification, stable film formation, dispersion, water retention, anti-microbial protection and colloidal protection. It can be widely used in coatings, cosmetics, oil drilling and other industries.
The main properties of Hydroxyethyl cellulose(HEC) are that it can be dissolved in cold water and hot water, and has no gel characteristics. It has a wide range of substitution, solubility and viscosity. It has good thermal stability (below 140C) and does not produce under acidic conditions. precipitation. The hydroxyethyl cellulose solution can form a transparent film, which has non-ionic features that do not interact with ions and have good compatibility.
Hydroxypropyl Methylcellulose (HPMC) or hypromellose is a derivatives of Methyl cellulose . It is a white or off-white fibrous or granular cellulose ether powder. It is currently the cellulose with the best performance in the world, integrating thickening, suspending, dispersing, emulsifying and stabilizing. Hydroxypropyl methyl cellulose (HPMC) is non-toxic, easy to use, and easily soluble in water. It is a polyanion in aqueous solution and has unique physical properties.
Redispersible Polymer Powder (RDP) is redispersible latex powders, based on vinyl ethylene acetate emulsion,which are divided into ethylene/vinyl acetate copolymer, vinyl acetate/vinyl tertiary carbonate copolymer, acrylic acid copolymer, etc., powder bonded after spray drying It uses polyvinyl alcohol as a protective colloid. This kind of powder can be quickly redispersed into emulsion after contact with water, because the redispersible latex powder has high bonding ability and unique properties, such as: water resistance, construction and heat insulation, etc.
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic,
tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size
distribution. It has low impurity content, good stability, high whiteness, uniform particle size and
good dispersibility.The advanced equipment and technology are used to make the shape of the
product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained
at low levels. Increase the amount of aluminum hydroxide to save resin.
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Hi,
This Vincent form Go4worldbusiness, We have decades of consistent experience in the Abrasive and Water-treatment market.
Our main products cover White Corundum and PolyAluminium Chloride in customized purity and purpose.
As well as Polyacrylamide/ Iron salt/ Alumium salt/ Flocculant/ Disinfectant/ Decolorizier/ Calcium Hypochlorite/ Citric Acid/ Calcium Chloride/ Soda Ash/ Sodium Bicarbonate/ Sodium Thiosulfate/ TCCA & ETC.
If any product meets your demand, please feel free to contact us. We gald to offer TDS & Free samples.
Your every inquiry or requirement will get prompt attention.
3-lobe alumina catalyst carrier have the characteristics of high compressive strength, low wear,adjustable size, pore structure and stacking density. All indexes can be adjusted according to requirements. It is widely used in adsorbent, hydrodesulfurization
catalyst carrier, hydrodenitrification catalyst carrier, CO sulfur-tolerant shift catalyst carrier and other fields.
1. Product Name: Glutaraldehyde 25% min. / 50% min. Tech/ low-methanol grade
2. Synonyms: 1, 5 - Pentanedial; GDA
3. The CAS No. : 111-30-8
4. EINECS No. : 203-856-5
5. Molecular Formula: C5H8O2
6. M. : 100.12
7. Quality Index
1) the Appearance: 25% is colorless transparent liquid, 50% is Oily light yellow transparent liquid, with widely - apple - like odor
2) p. : 101 ° C
3) M.P: 5.8 ° C
4) Density: 1.09 to 1.130 g/cm3
5) pH: 3-5
8. Use
As bactericide, disinfector, crosslinker for protein, leather tanning agent, widely, informs in petroleum exploitation, leather treatment, and electronic industry.
9. Packing: 220Kg UN Standard plastic drum or 1100Kg IBC Packing
10.UN Code:UN3265 PG II Hazard Class: 8
11. The HS Code: 2912190090
MBS (methyl methacrylate butadiene styrene copolymer) impact modifier is an important polymer material additive,
Application in different plastics:
Polyvinyl chloride (PVC):
MBS is a commonly used impact modifier for hard PVC. It can significantly improve the impact strength of PVC without affecting its transparency, making it suitable for products that require both transparency and impact resistance, such as transparent packaging films, heat shrink films, twisted films, etc.
In soft PVC, MBS can also improve its flexibility and impact resistance, while having minimal impact on other properties.
Engineering plastics:
MBS can improve the impact resistance and processing performance of polycarbonate (PC) and its alloys. For example, in PC/ABS alloys, MBS can enhance the toughness of the alloy, making it suitable for fields such as electronics and electrical enclosures that require high material performance.
For polyester engineering plastics such as PBT and PET, MBS can be used as a toughening agent to improve their impact resistance at low temperatures and expand their application range.
Advantages and Characteristics:
Good transparency: MBS has a refractive index similar to PVC and other plastics, so when used as an impact modifier, it will not affect the transparency of plastics, which is of great significance for the production of transparent plastic products.
Good compatibility with the matrix resin: MBS has solubility parameters similar to various plastics and can be uniformly mixed with the matrix resin to form a stable system, effectively exerting its impact modification effect.
Small impact on other properties: While improving the impact resistance of plastics, MBS has little effect on other mechanical properties such as tensile strength, elongation at break, as well as thermal stability, chemical stability, etc., and can maintain the comprehensive performance of plastics.
The impact on processing performance:
Improving processing flowability: MBS can reduce the melt viscosity of plastics, enhance their processing flowability, make plastics easier to form during processing, and reduce processing difficulty and energy consumption.
Good processing stability: MBS has good thermal and chemical stability, and is not easily decomposed or undergoes chemical reactions during plastic processing, ensuring the stability of the processing process and product quality.
Product Name: Dichloroacetyl chloride
Cas no-79-36-7
purity: 99%
MF: C2HCL3O
Appearance: colorless fuming liquid
Package: bags
Certificate: ISO
Application: It is a chemical compound primarily used in the synthesis of pharmaceuticals and agrochemicals. It is a reagent in organic chemistry that is utilized for various reactions, including the introduction of the dichloroacetyl group into molecules.
Sample: Available
Product Name: Formic acid
Other Names: AC
Cas No.: 64-18-6
Purity: 99.90%
MF: CH2O2
Appearance: Colorless fuming liquid
Package: Drum
Certificate: ISO
Application: It is used by a variety of industries for different purposes due to its unique properties.can be use in Textile,Leather,Rubber Industry
Sample: Available
224 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
