Aluminum Hydroxide
Technical Date Sheet:
Molecular Formula: Al(OH)3
H.S. CODE: 2818 3000
CAS No.:21645-51-2
EINECS No.:244-492-7
Fine Powder Aluminum Hydroxide
Introduction
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle
size distribution, low impurity content, good stability, high whiteness, uniform particle size and good
dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder
without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition
temperature of aluminum hydroxide is about 205 â??. Aluminum hydroxide flame retardant can
release a large amount of water vapor when heated. A large amount of water vapor can store heat
and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier
between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which
has no corrosion to metals. Usage
Aluminum Hydroxide 14-100um filler powder can be used for MMA and UP solid surface
and artificial marble that used for buildings and home decoration. Aluminum Hydroxide 1-10um flame retardant powder can be used for rubber hose, rubber
plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, electrical LDPE
cable material,LSZH wire compound,Silicone rubber,Silastic module,Foam
insulation,Paper-making,PVC industry,Pouring sealant,Shell of
car/phone/plane/computer,toothpaste friction agent, low-voltage insulation devices,glass fiber
reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant.
Package
H-WF-8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL.
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution. It has low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.The advanced equipment and technology are used to make the shape of the product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained at low levels. Increase the amount of aluminum hydroxide to save resin. For Artificial Marble and Acrylic Solid Surface: ATH Filler for Solid Surface can improve the anti-leakage, arc resistance, wear resistance and anti-aging performance of the products. For SMC(sheet molded plastic),BMC(bulk molding compounds): Ground Aluminum Hydroxide Ath Powder is mainly used in BMC and SMC production. According to the different sizes of Aluminum Hydroxide Powder,it is also can be used in toothpaste friction agent, low-voltage insulation devices, plastic, rubber, glass fiber reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant. Package: H-WF-5/8/10 25kg/bag, 24 Tons without pallets/ FCL,20 Tons with pallets/20 FCL H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/2FCL,24 Tons with pallets/20 FCL
High whiteness (has the reputation for Chinese Whiteness), low oil absorption, steady in room temperature and dehydrated to alumina while heating, to make the products have the function of flame retardant. Itâ??s good flame retardant filler because that no toxic and corrosive gases were generated in thermal decomposition. Itâ??s widely used in the solid surface, mould plastics, epoxy potting compound .
Sodium Hydroxide Flakes is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Physical Appearance White Flakes, Material shall be free from foreign matter, dirt or other visible impurities Sodium Hydroxide [as NaOH] Min. 99.50 Sodium Carbonate [as Na2CO3] Max. 00.40 Chlorides [as Cl] Max. 00.030 Sulphate [as SO4] Max. 00.030 Silicates [as SiO2] Max. 00.02 Iron [as Fe] Max. 20.00 Copper [as Cu] Max. 02.00 Nickel [as Ni] Max. 02.00 Manganese [as Mn] Max. 01.00 Chlorates & PerChlorate [as NaClO3] Max. 10.00 Matter insoluble in Water. Max. 00.050
HiraChem is your specialist supplier of Sodium Hydroxide. Sodium Hydroxide (Caustic Soda ) 98-99% Flakes. Sodium Hydroxide, also known as lye and caustic soda, is an inorganic compound with formula NaOH. It is a white solid, a salt (ionic compound), consisting of sodium cations Na+ and hydroxide anions OHâ??. Sodium hydroxide is a highly caustic base and alkali, that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. It is highly soluble in water and readily absorbs moisture and carbon dioxide from the air. It forms a series of hydrates NaOH·nH2O. The monohydrate NaOH·H2O cystallizes from water solutions between 12.3 and 61.8 C. The commercially available "sodium hydroxide" is often this monohydrate, and published data may refer to it instead of the anhydrous compound
Sodium Hydroxide Solution is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Appearance: A clear colorless liquid free from foreign matter Relative Density at 40�°C: 1.506 % Sodium Hydroxide [as NaOH]: 48.80% Sodium Hydroxide (On Dry Basis) [as NaOH] : 99.80% Sodium Carbonate [as Na2CO3]: 0.084% Chlorides [as Cl] : 0.004% Sulphate [as SO4] : 0.005% Silicates [as SiO2] : 0.003 % Copper as [as Cu]: 0.08 ppm Manganese [as Mn]: 0.06 ppm Iron [as Fe]: 4.02 ppm Matter insoluble in water: 0.010ppm
Sodium hydroxide 50% Solution is used for a variety of industrial applications like Pulp and paper industry (pulping and bleaching, de-inking waste paper). It is also used in Textile industry (fiber processing and dyeing) and in Soaps and detergents industry (saponification of fats and oils, anionic surfactant manufacturing).Sodium Hydroxide 50% Solution is also used in Bleach manufacturing. Sodium Hydroxide 50% Solution is used in Petroleum exploration and processing and in Aluminum production., as well as Chemical processing. It used in Waste neutralization, Acid gas scrubbing and Neutralizing of acids and acid gases. Functions Catalyst Plasticizer pH Adjuster Bleaching Agent Solvent Sales Specification Hydroxide Alkalinity, as NaOH: 48.50% Sodium Chloride (NaCI): 100ppm Sodium Carbonate (Na2CO3): 0.20% Max Sodium Chlorate (NaCIO3): 0.30 Max Sodium Sulfate (Na2SO4): 0.04 Max Iron (Fe): 10.00 Max Packing 690 lb drum or 3370 lb tote
Supplier: Aluminum sulfate, caustic soda flakes (sodium hydroxide), calcium hydroxide (hydrated lime), calcium carbonate and calcium hypochlorite
Sodium Hydroxide Beads Food Grade is commonly used as a processing aid in food production, including baked goods, beverages, canned and pickled foods. Caustic soda is used for curing foods since it helps soften and preserve foods, such as olives. Caustic soda is used for washing and peeling fruits and vegetables. Caustic soda is used to thicken ice cream and gel eggs. In baked products, caustic soda helps form a shiny and crisp crust, such as in bagels and pretzels. Functions Preservative Food Additive Thickening Agent Tenderizer Raw Material Sales Specification Sodium Hydroxide (NaOH): 99.0% Sodium Carbonate (Na2CO3): 0.50% Sodium Chloride (NaCl): 0.03% Ferric Oxide (Fe2O3): 0.005% Mercury (Hg): 0.1 mg/kg Packing 55.115 lb bag, 40 bags per pallet 551.15 lb metal drum, 4 drums per pallet DOT Transportation UN/NA: 1823 Proper Shipping Name: Sodium Hydroxide, Solid Hazard Class: 8 Packing Group: II
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution. It has low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.The advanced equipment and technology are used to make the shape of the product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained at low levels. Increase the amount of aluminum hydroxide to save resin.
