Ppgi, ppgl, gi, gl.Hdgi steel coil & sheets, corrugated steel sheets, trapezoid steel sheets.
Aluminum foils, incl chocolate foil, lidding foil, hairdressing foil, ptp blister foil, household foil.
Industrial chemicals, water treatment plants, chemical factory.Producing, transportation, shipping
Grinding wheel, cutting wheel, sanding disc, sanding belt, flap disc, flap wheel, sand paper, sand cloth.
Heating elements.
Fiber laser equipment like laser cutting machine, laser welding machine, laser marking machine.
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc. It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate, electronics, etc.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application. 2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete. 3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better. 4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials. 5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending.
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant. It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc.
Introduction Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 â??. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals. Usage Aluminum Hydroxide 14-100um filler powder can be used for MMA and UP solid surface and artificial marble that used for buildings and home decoration. Aluminum Hydroxide 1-10um flame retardant powder can be used for rubber hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, electrical LDPE cable material,LSZH wire compound,Silicone rubber,Silastic module,Foam insulation,Paper-making,PVC industry,Pouring sealant,Shell of car/phone/plane/computer,toothpaste friction agent, low-voltage insulation devices,glass fiber reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant. Package H-WF-8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL. H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/20 FCL,24 Tons with pallets/20 FCL.
Super fine Powder Aluminum Hydroxide Aluminum hydroxide is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate , electronics,flame retardant resin.It can be widely used in electrical LDPE cable material,LSZH wire compound,LSZH cable,Silicone rubber,Rubber insulation,Silastic module,Foam insulation,Paper-making,PVC industry,Pouring sealant,Shell of car/phone/plane/computer,conveyor belt, etc. The flame retardant effect of aluminum hydroxide after activated treatment is more better. (the ATH dosage increases after treatment, for example, the normal dosage of untreated 1 micron size aluminum hydroxide is 30-40%, the dosage can be increased to about 50% after activated treatment). It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc. The initial decomposition temperature of aluminum hydroxide is about 205 . Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardance. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic,tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution. It has low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.The advanced equipment and technology are used to make the shape of the product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained at low levels. Increase the amount of aluminum hydroxide to save resin. For Artificial Marble and Acrylic Solid Surface: ATH Filler for Solid Surface can improve the anti-leakage, arc resistance, wear resistance and anti-aging performance of the products. For SMC(sheet molded plastic),BMC(bulk molding compounds): Ground Aluminum Hydroxide Ath Powder is mainly used in BMC and SMC production. According to the different sizes of Aluminum Hydroxide Powder,it is also can be used in toothpaste friction agent, low-voltage insulation devices, plastic, rubber, glass fiber reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant. Package: H-WF-5/8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc. � � � It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate, electronics, etc. Flame/Fire Retardant: � The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardance. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals. Package: 1.JR-ATH-1andJR-ATH-2 25kg/bag, 13-15 Tons without pallets per 20GP. 25kg/bag, 26 Tons with/without pallets per 40HQ. 2.JR-ATH-3andJR-ATH-4 25kg/bag, 18 Tons without pallets per 20GP. 25kg/bag, 26 Tons with/without pallets per 40HQ. 3.H-WF-5/8/10 25kg/bag, 24� Tons without pallets/20'FCL,20-22 Tons with pallets/20'FCL H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/20'FCL,24-25 Tons with pallets/20'FCL
Sodium Metabisulphate
Anionic polyacrylamide is a water-soluble polymers. Due to its molecular chain containing a certain number of , it can adsorption the solid particles suspended in water, bridging between the particles or the particles flocculation by charge neutralization to form large flocs. So it can accelerate the sedimentation of particles in suspension, have a very clear clarification for filtering . Mainly used for various industrial wastewater flocculation, sedimentation clarification treatment, such as steel plant wastewater, electroplating plants and waste water, coal washing waste water sewage treatment, sludge dewatering. It can also be used for drinking water clarification and purification. Features
Introduction: FP series enhanced polypropylene centrifugal pump, FS series engineering centrifugal pump and FPZ anti-corrosion self priming centrifugal pump are new modified plastic pumps which are developed on the basis of absorbing domestic and international advanced technology of the same product.They all adopt mechanical seal. FP series polypropylene centrifugal pump uses CFR-PP (enhanced polyprolene) as the material of the pump body,and FS series engineering plastic centrigfugal pump use ABS(engineering plastic) as the material of the pump body. FPZ anti-corrosion self priming centrifugal pump is of one mould shaped uses material of polyvinylidenefluoride (PVDF) and enhanced polypropylene (RPP). Main Character: Advanced structure,light weight,small volume,long life. They are widely used to transporrt acid ,alkali ,hydrochloric acid etc corrosion liquid in chemical industry, foodstuff,pharmacy,electroplate,papermaking,environment protection,water treatment etc. Operating coditions: 1.Plastic pump should be installed flatly forbid supporting weight of pipeline.If it needs particularly be installed vertically,the motor must be upturned. 2.Pump needs to pour water before it starts. When pumped liquid surface is higher than axesline, open suction pipe valve before it starts. If pumped liquid surface is lower than axes line,the pipeline needs to match bottom valve. 3.Check if the rotary direction of motor and pump is accordant. 4.Medium temperature: FP centrifugal pump=80°C FS centrifugal pump =60°C. FPZ self priming centrifugal pump =120°C 5.Pump forbid racing and operation.
PF-MT-68 is a high-tech product independently developed by Zibo Pengfeng. Through more than ten years of revolutionary engineering R&D, one of our advanced multiple performance enhanced Aluminum Hydroxide product has born. PF-MT-68 is a powerful contender for other prestige ATH manufacturers around the globe. After the state of art purification process, our product has low silicon, iron, sodium, organic matter and other impurity content. Using unique seeding preparation and crystal growth process control technology, PF-MT-68 has the features of great particle morphology, better crystal uniformity, concentrated distribution, good dispersity, and good compatibility with polymer. With high thermal stability performance, the product of TGA (heat dehydration temperature) is up to 228 , 10 higher than other standard products. Nevertheless, it also has low oil absorption, low electrolyte, better filling, coating, flame retardancy, and smoke suppressing functions. The final product has excellent corrosion resistance, arc resistance and other properties. PF-MT-68 has been widely used in wire and cable, high-end copper clad plate, rubber and other fields.
Size:DN50-DN400 â?¢ Design Standard: BS EN14525 â?¢ Material conform to EN-GJS500-7. â?¢Working Pressure: PN10.PN16 â?¢Bolts/Nuts: Galvanized Steel, Dacomet Coating, Hot Dip Galvanizing to ISO898-1, ISO898-2 â?¢Rubber Gasket : EPDM to EN681-1, NBR to EN682 â?¢ WRAS approved FBE coating and Rubber also available on request. * High Tolerance Mechanical Pipe Fittings. * Angular deflection +/- 6°.
Performance Range Flow Rate (Q) Up to 8000 m3/h Head (H) Up to 210m Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ) Temperature -10 Celsius to 130 Celsius
