Product Description Commodity : Dysprosium Ferrum Alloy (DyFe Alloy) Dy 80%(-/+0.1%) RE Purity(TREM):99.9% Min.
Cube2--C17200 (CDA 172) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches Rockwell C45. Meanwhile, the electrical conductivity is a minimum of 22% IACS in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. International Specification: Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651; RWMA Class 4 Strips:ASTM B194, AMS4530,4532; SAE J461,463 Sheets: ASTM B194 Wires:ASTM B197, AMS4725, SAE J461,463 Plates:ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4. European Standards: CuBe2, DIN 2.1247, CW101C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM. Available Sizes: Custom Diameter & Sizes, Random Mill lengths Available Products (forms): Round bars, Round strips, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Chemical Composition: Be: 1.85-2.10% Co+Ni: 0.20% Min. Co+Ni+Fe: 0.60% Max. Cu: Balance Note: Copper plus additions equal 99.5% minimum Typical Physical Properties: Density (g/cm3): 8.36 Density before age hardening (g/cm3): 8.25 Elastic Modulus (kg/mm2 (103)): 13.40 Thermal Expansion Coefficient (20 ípC to 200 ípC m/m/ípC): 17 x 10-6 Thermal Conductivity (cal/(cm-s-ípC)): 0.25 Melting Range (ípC): 870-980 Note: 1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products.
CuCo1Ni1Be--CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditions;CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively, all of its properties are quite the same as CuCo2Be-C17500 and CuNi2Be-C17510. International Specification: Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3 Sheets: ASTM B534 Wires: ASTM B441 Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM.
CuCrNi2Si ¿C UNS.C18000 Copper Chromium Nickel Silicon Alloys, which also called Beryllium Free Copper alloy, meets the mechanical requirements of RWMA Class 3 Copper, is a very hard heat treatable copper based alloy with an economical higher strength and high conductivity, and C18000 Alloys is utilized when a combination of very good mechanical strength along with moderate electrical and thermal electrical conductivity are required. Furthermore, C18000 alloy is an excellent substitute for copper beryllium alloys C17500 and C17510 in terms of many applications. International Specification: Rods/Bars/Plates/Sheets: UNS.C18000, CDA180, RWMA Class 3 European Standards: CuCrNi2Si, DIN 2.0855, CW111C to EN Note: ASTM: American Society for Testing and Materials RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to DIN & RWMA.
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. Available sizes: Custom diameter & sizes, random mill lengths International specification: ú¿¦·+O¦µ+¦ú¬ Rods/bars/tubes: astm b196, 251, 463; sae j461, 463; ams 4533, 4534, 4535; ams4650, 4651; Rwma class 4 Strips:astm b194, ams4530, 4532; sae j461, 463 Sheets: astm b194 Wires:astm b197, ams4725, sae j461, 463 Plates:astm b194, sae j461, 463; ams4530, 4533, 4534, ams4650, 4651; rwma class 4. European standards: cube2, din 2.1247, cw101c to en Note: Astm: american society for testing and materials Sae: society of automotive engineers Ams: aerospace materials specification (published by sae) Rwma: resistance welder manufacturers' association Note: unless otherwise specified, material will be produced to astm. Plywood cases/plastic pipes/wooden cases
Usage: used in electro, metallurgy and chemical industry. 1. Widely applied to refractory material and power metallurgy industry to improve the heat resistance, wear resistance and oxidation resistance. Products made of it are applied in steel smelting furnace, kiln hood and kiln furniture etc. 2. In the chemical line of organic silicon, industrial silicon powder is basic raw material that high polymer of organic silicon formatting. Such as using for producing organic monomer, silicon oil, silicon rubber antiseptic to improve the characteristics of insulating, corrosion-resistance and waterproof performance etc. 3. Industrial silicon powder is sublimated into monocrystaline silicon, which is widely used in hi-tech field as an essential raw material for integrated circuit and electronic element. 4. In metallurgy and foundry line, industrial silicon powder is regarded as to be iron base alloy additive, the alloy pharmaceutical of silicon steel, thus improve the steel hardenability (1)no mark or mark as client's requirement (2)1mt/bag or as client's requirement (3)plastics woven bag
CuSn5 UNS.C51000 Phosphor Bronze Alloys, with a nominal composition of 94.80% copper and 5.0% tin, deoxidized with 0.2% phosphorus is the most widely used of the phosphor bronzes, which offering an optimum combinations of such engineering properties as high strength and ductility.
C17300 leaded beryllium copper.
CuCr1Zr UNS.C18150 Chromium Zirconium Copper C18150 is an excellent and unique copper alloy with high electrical conductivity, hardness, and ductility, moderate strength, and excellent resistance to softening at elevated temperatures. The addition of 0.1% zirconium (Zr) and 1.0% chromium (Cr) to copper results in a heat treatable alloy which may be solution treated and subsequently aged to produce these desirable properties. Rod is usually supplied from the mill in the fully aged and drawn condition so no further heat treatment is required by the fabricator. The softening temperature of properly heat treated C18150 rod exceeds 500ípC as compared to unalloyed pure copper which softens at 200ípC, and silver bearing coppers which soften at 350ípC.
The specs for mg metal ingot shows as below: Size: 7.5kg+/- 0.5kg/Ingot Mg : 99.9% Min Si : 0.02% Max Al : 0.02% Max Mn : 0.03% Max Fe : 0.04% Max Cl : 0.005% Max Others each 0.01% Max. about 1mt in a magnesium pallet, covered with plastic bag, bundle with steel tape.
Product Brand Number Chemical compositions (%) Sií¦ Feí_ Alí_ Caí_ Metal silicon 553 99.85 0.5 0.5 0.3 Chemical silicon 441 99.0 0.4 0.4 0.1 3303 99.0 0.3 0.3 0.03 2202 99.5 0.2 0.2 0.02. 1 ton packing or according to customers need.
Si:98.5%(min); fe:0.5%(max);al;0.5%(max);ca:0.3%(max) In plastic woven bags of 1mt net each
Si:99%(min); fe:0.3%(max);al;0.3%(max);ca:0.03%(max) In plastic woven bags of 1mt net each
Material:al 6061-t6 Finish:blue anodize Approximately dimension: ¡¨®50.5*222mm Machining process: turning--cnc milling--blue anodize Tolerance:+/- 0.005" Moq: 2000 pcs Supplying ability/month: 2000 pcs Delivery: 30 days Price per your drawing Individually packed, in carton or plywood box
g--clear anodize Tolerance:+/- 0.005" Moq: 2000 pcs Supplying ability/month: 2000 pcs Delivery: 35 days Price per your drawing Individually packed, in carton or plywood box
Stone carving Name: vividly double dogs carving Material: g623, g633, g602, g354, g682, g663, tiger skin yellow, panxiblue, white granite huian, and so on Processing: sculpture; carving; (hand-made) Size: height --- 15cm, 30cm, 35 cm, 45cm, ... Length --- 20cm, 35cm, 40cm, 50cm, ... Packing: wooden Standard export wooden crate
The world wide renowned magnates in power transmission industry like abb, simens, alstom, hyundai hyosung, mitsubishi toshiba and ge. Selected us as their important supplier of aluminum casting housing for gas-insulated switchgear(gis), current circuit breaker (ccb), gas circuit and breaker(gcb). Such kind of products require high strength, high density, and low flaw rate in order to maintain high reliability of power supply system. We achieve high quality thanks to a complete set of manufacturing equipments, testing tools, and also a solid quality control system with a well trained working team. Densitometer, spectral measuring instrument to check the ingot; mould strength tester to make sure the sand mould at appropriate strength; x-ray tester to conduct ndt; and when the products are finally machining finished by cnc, we have coordinate measuring machine (cmm) to measure the important dimensions. Without such a complete set of equipments and tools, high quality is impossible. Our factory has passed certification of iso9000 iso14000 ohsas18000 and also the audit of the above listed customers for vendor admission.
Plate rolling Our metal plate rolling facilities are listed first class not only in china but also in world wide. We have over 10 plate rolling machines, including a hausler heavy plate roller, capable of rolling steel plates up to 4250mm in width by 210mm in thickness. We also have a range of other machines including the faccin sertom and more. We can carry out all necessary metal processes before rolling, such as cnc cutting, plate bevelling, and also the process of shot blasting and painting after rolling Our coastal location makes for convenient transportation across the globe. Users in petro-chemical pipelines, wind tower construction can take our manufacturing service flexibly.
Magnesium ingot and silicon metal.
Metal parts of automobiles, textiles, bathroom, lighting, electronics, electrical, electrical appliances and daily necessities and other metal parts.
