E m ail: kev at mplent dot com 1, 1-bank, 2-bank, 3-bank, 4-bank for option 2, cct up to 8000k 3, luminance up to 6000 cd/m2 (dimmable) 4, direct-lit, high density smd led matrix(572 pc/bank) 5, isolated constant current driver. 6, mitsubishi rayon 3mm acrylic view panel
E m ail: kev at mplent dot com 1, 1-bank, 2-bank, 3-bank, 4-bank for option 2, cct up to 8000k 3, luminance up to 6000 cd/m2 (dimmable) 4, direct-lit, high density smd led matrix(572 pc/bank) 5, isolated constant current driver. 6, mitsubishi rayon 3mm acrylic view panel
E m ail: kev at mplent dot com 1, 1-bank, 2-bank, 3-bank, 4-bank for option 2, cct up to 8000k 3, luminance up to 6000 cd/m2 (dimmable) 4, direct-lit, high density smd led matrix(572 pc/bank) 5, isolated constant current driver. 6, mitsubishi rayon 3mm acrylic view panel
Power supplyAc 198v-242v 50-60hz Power (kva)3.5 Tube current (ma)5 Tube voltage (kv)150-250 Focal spot (mm)2.0 x 2.0 Radiacation coverage40o CoolingAir Weight (kg)X-ray generator29 Control unit13 Size (mm)X-ray generator270 x 270 x 700 Control unit320 x 180 x 380 Max penetration fe(mm)39
NDT X ray equipment is used for inspect the inner fault of the material. It adopts radiography theory to make the image on the film, in order to evaluate the work piece. Features of X Ray Generator: Adopt high temperature installation technology and high pure degree aluminum radiator to improve 30% heat radiation. Portable design, light weight and easy operation. SF6 gas insulator, grounded-anode design to keep the operator safety. Strictly follow 1:1 work and rest radio, eliminating the disoperation. Good HV coil made by imported enamel wire in the generator to improve the power. Glass tube Panoramic XXH-1005 Power(KW) >1.0 , Beam Angle: 360*25 ,Max.Penetration A3 steel (mm) : 6 XXH-1605 Power(KW) >1.5 , Beam Angle: 360*25 ,Max.Penetration A3 steel (mm) : 18 XXH-2005 Power(KW) >2.0 , Beam Angle: 360*25 , Max.Penetration A3 steel (mm) : 26 XXH-2505 Power(KW) >2.5 , Beam Angle: 360*25 , Max.Penetration A3 steel (mm) : 36 XXH-3005 Power(KW) >3.0 , Beam Angle: 360*25 ,Max.Penetration A3 steel (mm) : 46 XXH-3505 Power(KW) >3.5 , Beam Angle: 360*25 , Max.Penetration A3 steel (mm) : 56 Glass tube Directional XXQ-1005 Power(KW) >1.0 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 8 XXQ-1605 Power(KW) >1.5 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 20 XXQ-2005 Power(KW) >2.0 , Beam Angle: 40 , Max.Penetration A3 steel (mm) :29 XXQ-2505 Power(KW) >2.5 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 39 XXQ-3005 Power(KW) >3.0 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 49 XXQ-3505 Power(KW) >3.5 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 59 Ceramic tube directional XXG-1605 Power(KW) >1.5 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 20 XXG-2005 Power(KW) >2.0 , Beam Angle: 40, Max.Penetration A3 steel (mm) : 29 XXG-2505 Power(KW) >2.5 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 39 XXG-3005 Power(KW) >3.0 , Beam Angle: 40 , Max.Penetration A3 steel (mm) : 49 XXG-3505 Power(KW) >3.5 , Beam Angle: 40°, Max.Penetration A3 steel (mm) : 59 wooden case 80KG
1.Abt leaded glass: Lead glass is a silica type, of high quality optical grade with over 60 percent heavy metal oxide. Zf2 and zf3 lead glass is mainly used in x-ray room and ct scanning room. Zf6 and zf7 lead glass is mainly used in nuclear industry such as nuclear power station and atomic energy application. 2.Terms: Payment terms:t/t;western union. Shipment terms:fob qingdao, tianjin, shanghai. Delivery time:1-15days to your orders. Packing details:first packed with foams then wooden case 1.With foams 2.With wooden case
Place of origin liaoning, china (mainland) Brand name dgt Model number xxg-3005 Power electronic Usage non-destructive testing Nature x-ray Business mancfacturer Function non-destructive testing fields X-ray tube ceramic tube Focus size(mm) 2.5*2.5 Weight of generator 34kg Dimension of generator 320*320*625 Max penetration(mm) 50mm Payment & shipping terms: Fob price: us $ 6, 000-8, 000/ set Get latest price Minimum order quantity: 1 set/sets Port: dalian Packaging details: wooden cases Delivery time: 10 in working days Payment terms: t/t Supply ability: 20 set/sets per month
The features of mammography x ray system : Mammography x ray system is integrating designed, with beautiful appearance, manual operation, convenient operation and use;use the most popular keyboard, optical mouse operation;large screen high resolution colorful display, low radiation, clear and bright image. 1 high-definition and colorful display2 multiple function and easy operation3 radiationless, no-invasive, long life-time4 mouse action, convenient operation Mammography x ray system: Etect galactocele accurately;2 detect intraductal papilloma;3 detect mammary duct ectasia and acute mastitis:4 detect proliferation of mammary gland and breast cancer. Weight: 240kg Density adjustment:16 density steps Wooden box
Product Model: XXQ-2505 Output Voltage (KV): 150-250 Input (KW): 2.5 Focus Spot (mm): 2.0,2.0 Beam Angle: 40 +5 Max Penetration (mm): 39 (Steel A3) Weight (kg): Generator: 37 Controller: 20 Dimensions (mm): Generator: 320,730 Controller: 365,310,225. * Compact X-ray generator, anode grounded, forced air cooling * Light weight, portable, easy to use * The radio of the exposure time to the stop time is 1:1 * Aging the X-ray generator and checking the exposure parameter automatically * High-voltage time-delay function protects the operator from radiation * Strictly controlled the production technique, nice outward, reasonable designing. Wooden cases, and two cases for one set of x-ray equipment.
Our company produce and supply Industrial X-ray Equipment, X-ray Tube, X-ray Flaw Detector; Medical X-ray Tube; X-ray Tube for security check; and X-ray Pipeline Crawler. Features of X-ray Equipment: Compact X-ray generator, anode grounded, forced air cooling; Light weight, portable, easy to use; The radio of the exposure time to the stop time is 1:1; Aging the X-ray generator and checking the exposure parameter automatically; High-voltage time-delay function protects the operator from radiation; Strictly controlled the production technique, nice outward, reasonable designing. Wooden cases, and two cases for one set of x-ray equipment.
Our company produce and supply Industrial X-ray Equipment, X-ray Tube, X-ray Flaw Detector; Medical X-ray Tube; X-ray Tube for security check; and X-ray Pipeline Crawler. Features of X-ray Equipment: Compact X-ray generator, anode grounded, forced air cooling; Light weight, portable, easy to use; The radio of the exposure time to the stop time is 1:1; Aging the X-ray generator and checking the exposure parameter automatically; High-voltage time-delay function protects the operator from radiation; Strictly controlled the production technique, nice outward, reasonable designing. Wooden cases, and two cases for one set of x-ray equipment.
The main products of our company are composed of X -ray tube, portable X -ray flaw detection machine, mobile X -ray flaw detection machine, X -ray orientation equipment and X -ray diffraction equipment, among which X -ray instrument amounts to 43 varieties, and X -ray tube amounts to 67 varieties. The X-ray tube products including 10kv-350kv each kind of specification, specially uses in the fluorescence spectroscope's X- ray tube, in the mobile flaw detection machine the ceramic X- ray tube achieving the international advanced level. We have produced the 160kv, 2mA X- ray tube used in security check for more than 20 years, product best-selling the world. Wooden case.
Mobile High frequency C-arm X-ray Machine YSX0701 C-arm X-ray Machine Introduction: The clinical applications of this C-arm X-ray machine include orthopedics (arthroplasty, joint nailing, joint fluoroscopy, restoration and fixation for bone injury in emergency), radiology (abdominal organ angiography, gastrointestinal fluoroscopy), gynecology (uterus angiography), urology (kidney and bladder angiography), surgery (pacemaker implantation, peripheral vascular examination, etc.) and so on. Key Features of C-arm X-ray Machine: 1. Adopts the true digital high frequency host, gets the clearest and richest image with minimum dose, greatly reduces the potential harm of x-ray to clinicians and patients. 2. The unique double displays make operation intuitive, easy and reliable. 3. The vertical and horizontal movements and rotation of C-arm are all electric maneuvered. 4. Micro-computer based controller features with failure self-diagnostic function, easy maintenance. 5. Digital interfaces optionally equip with picture collection & storage workstation, directly upgrade the digital image system, to provide a short cut for your heavy file management. Upgraded Digital Image System of C-arm X-ray Machine: 1. Up to 100,000 static images stored in hard disk 2. Multi-image simultaneously display 3. Image processing functions: rotation, overturn lightness and contrast adjustment 4. Diagnostic report by laser printer Technical Data: Generator power/Frequency 3.5kw/40KHz 5kw/40KHz Radiography KV 40-110KV 40-120KV Radiography mA 30-70mA 24-70mA Fluoroscopy KV 40-110KV 40-120KV Fluoroscopy mA 0.1-5mA 0.1-5mA Pulse fluoroscopy 0.1-8mA 0.1-8mA Focus size 0.6í-1.5mm 0.3í-0.6mm Stationary anode Rotation anode Anode heat capacity 30KJ(40kHU) 150KJ(200kHU) Heat capacity of 500KJ(667kHU) 600KJ(800kHU) Collimator Iris, auto-tracking, variable visual field, double leaf Focus-to-image intensifier distance(SID) 1000mm 1000mm C-arm depth 730mm 730mm C-arm open 815mm 815mm C-arm arc glide with full balance 115íp 115íp C-arm rotation(motored) í+180íp í+180íp Upward and downward movement(motored) 400mm 400mm Forward and backward movement(motored) 200mm 200mm Horizontal swing angle í+12.5íp í+12.5íp Image intensifier 9" metal screen intensifier Camera High speed CCD camera Monitor 14" high resolution monitor Panel Two operation panels, automatic display error codes Image memory Store 8 images, freeze the last image, multilevel denoise, double displays in one screen Supply power 220V,50Hz,20A Power capacitor 4KVA . GW:300KG NW:240KG.
600mA TV Remote Control Medical Diagnostic X-Ray Radiography Machine YSX0603 1. Microcomputer control x-ray radiography assembles: optional 600mA. 2. Total 432 storage combination controlled by element such as kV mA S is applied radiography for the following filed three body position, fat middle and thin body type, automatic detect and display cod of mistake in system, send warning signal, detect accuracy and maintain. 3. X-ray tube capacity protection, anode starting-up protection and radiograph time-limit protection device semi-conduct controlled, fluoroscopy computed time device, x-ray tube over-hot protectorate provided, ensure x-ray tube run safely long time, improve accuracy of kV mA S. 4. Bulb type over remote-controlled diagnostic table and image intensifier television system are installed. They realize not only bright operation, but also supply convenience for science resonator suffer are reduced. Specifications of automatic spot-film are abundant. There are also automatic collimators for users convenience. 5. Applied in all kinds of hospital for radiography such as general body, beam filtration, and chest. Department Technology parameters High voltage generator control table and high voltage transform assemble Fluoroscopy Tube currency 0.3-5mA continuous currency Tube voltage 50-110KV continuous voltage Radiography Tube currency 32-630mA shift Tube voltage 45-125KV continuous voltage Exposure time 0.01-6.3s 23 shift Power Voltage 380Ví+10% Frequency 50Hzí+1Hz Capacity í¦50KVA Inner resistance í_0.3ª+ X-ray assembly Focus 1í-1.2í-2 double focal Rated rotate speed of anode 2800r/min Changed beam limited device Diagnosis table YS09D Automatic, adjusted field of view CS15Electro-motion diagnostic table The table body rotation "-15ípí½0ípí½+90íp" Focus to film distance 1100í½1500mm,adjustable manual 360ípfoot board The table to height 870mm Stationary grid Grid density 40L/cm Grid ration 10:01 Focusing distance 120cm Spot film device Scope of moving Longitudinal moving: 900mm; Transverse moving: í+120mm Specification of scope film Full :8"í-10", 10"í-12", 11"í-14", 14"í-14" Two: 8"í-10", 10"í-12" Three:11"í-14", 14"í-14" Four: 11"í-14", 14"í-14" Medical television system configuration 9ísx-ray image intensifier made by Toshiba, CCD camera,14ís high resolution monitor 14ísmonitor resolution Horizontal centerí¦1000 TV line Gray scale í¦10 grades Video width >12MHZ Mode of scan 625 lines, 5 field, Interlaced scanning Geometry distortion
High Frequency Mammography unit(tube import from other country) YSX0902 X-ray Generator Generator Type:High Frequency Inverter 30-60kHz Input Power: Single phase 220VAC, 50/60Hz Radiographic Ratings:Large Focal Point 22-39KV/1-600mAs Small Focal Point 22-39KV/1-100mAs Power Rating:5.5kW X-ray Tube Model:IAE X-ray Tube Anode rotation rate: 0000 rpm Focal Spot Size: Dual Focus 0.1 / 0.3mm Target Material:Molybdenum (Mo) Port Material:Beryllium (Be) Anode Heat Storage: 300KHU Anode Cooling:Air cooling Filtration: Mo(0.03mm),Al(0.5mm) Radiographic Stand C-ARM:Vertical Movement:60cm (70~130cm) Motorized Rotations Deg:í+180íp Motorized (Deg.Data Display) SID: 65cm Cassette Image Receptor Bucky Device:18í-24cm Bucky drive mechanism Grid Ratio:5:1 ,30 Line/cm Line Voltage 220V,Single phase Weight 240kg Comfortable Compression When some degree of pressure is required for radiography, it allows you to presser the appropriate pressure(up to a maximum of 20kg)and is equipped with MICOM Control's Soft-touch system which is designed to minimize the discomfort of the examine with in the pressure range. Tissue Compression: Manual and Motorized (Max 20kg) Compression Force and Thickness Data Display Micro Control's Compression Automatic Release Intelligent Automatic Exposure Control(AEC) With the Automatic Exposure Control system, it is possible to produce images with reliable intensity suitable for and film, screen, or method of radiography. Furthermore, it greatly enhances the convenience of radiography by embedding the Full-AEC function which is capable of utilizing the Auto kV Type:Solid-State Detector or PMT Detector Microprocessor Control AEC Mode:Full AEC(Auto kV) Semi AEC (KV Select) Manual (kV,mAs Select) Density Adjustment:16 density steps. GW:300kg NW:240KG.
100mA mobile x-ray machine YSX0410 GENERAL 1. Used in ward and emergency treatment room for radiography. 2. Combined x-ray generator. 3. Single focus, bridge rectification. 4. It is precise safe, reliable and flexible. 5. Remote control device(control rangeí¦5m)is used. Unit Configuration Control table, HT generator unit, Ht cable, X-ray tube unit . Main Characteristics 1. Single table and single tube. 2. Design according to the electric mechanism of middle-size machine ,The function is reasonable. 3. The high-tension system is of march-past structure. Equipped with afullwave rectification high-voltage generator and independent X-ray tube unit, with large output power and reliable and stable operation. 4. Supply voltage (V), roentgenoscopy, radiography (kv) and stepless adjust able. 5. Equipped with the manostat for filament of X-ray tube and the spacecharge compensator as to ensure the stable and accurate output. 6. Equipped with the capacity limitation and portection circuit and KV mA S interlock limitation and protection. 7. Adopt the digial circuit timer, grade according to R10 priority coefficient and can control time exactly. 8. Diagnostic table is of electric back rotation and is equipped with vibrating filter-ray device. 9. The spot film device of luminescent serene can hold the film jecket of various sizes and can make the photography of full-film and two sectional films separateiy. 10. The column has the bottom track only, which is easy while installation. MIN TECHNICAL INDEXES X-ray generator : Stationary anode, single focus and bridge silicon rectification. The x-ray generator is an oil-immersed self-cooled unit. Max rated capacity Current 15mA 30mA 60mA 100mA Voltage 90kvp 90kvp 90kvp 80kvp Time 6.3s 6.3s 4.0s 3.2s Power supply Voltage 180-240V Frequency 50Hz Capacity Not over than 7KVA Intemal resistance Not larger than 1ª+ Voltage adjustment range of x-ray tube 50-90KV Range of the time 0.08-6.3s Distance between the focus to the ground 700-1780mm X-ray tube focus transverse rotation í+60íp Specification of x-ray tuble Model XD42.9/100 fixed anode, single focus 1.8/4.3mm Transport dimension(Lí-Wí-H)(mm) 1230í-900í-2050 Weight(kg) Net:159/gross:256. Transport dimension(Lí-Wí-H)(mm) 1230í-900í-2050 Net:159KG Gross:256KG.
1) 220V power supply voltage of plus or minus 10% of Pathology 2) Rated 60W. Technical specifications Mainframe exterior size 280 * 200 * 80MM Ball-2009140 * Spiral (excluding Canada longituba) Weight 2.2kg mainframe Ball pounds Temperature 5-40 degrees Relative Humidity
Power output : 15kw Inverter frequency : 40khz X-ray tube : xd56-5 17/130 Small focus: 0.3 large focus: 0.6 Thermal capacity: 212kj (300 khu) The speed of the rotary anode: 3000rpm Tube voltage : 40~125kv Tube current : 200ma Mas : 0.4~360mas Bucky grid : grid density 103l/inch; grid ratio:10:1 Focus distance:150cm stationary 18"íß18"(import) Power supply : 220vía10% 50hz, capacity: í²16kw Operation method : graphic remote-control lcd touch screen And wireless remote-control exposure (optional: control box of graphic remote-control Lcd touch screen)
Specifications Fluoroscopic capacity Max rated capacity : tube current 4ma, tube voltage 110kv Automatic fluoroscopy : tube voltage:40kví½110kv adjust Automatically Tube current : 0.3maí½4ma set manually Manual fluoroscopy : continuous tube voltage:40kví½110kv Continuous tube current : 0.3maí½4ma Pulse fluoroscopy : continuous tube voltage 40kví½110kv Continuous tube current 4.1maí½8ma Photography capacity Max rated capacity : 3.5 kw Tube voltage and cur- Rent combination : 40kví½49kv 1 í½125 mas 50kví½59kv 1 í½110 mas 60kví½69kv 1 í½90 mas 70kví½79kv 1 í½80 mas 80kví½89kv 1 í½71 mas 90kví½99kv 1 í½63 mas 100kví½110kv 1 í½40 mas Plateholder size : 200mmíß250mm(8ísíß10ís)or 250mmíß300mmú¿10ísíß12ísú¬ X-ray tube X-ray tube special for high frequency Fixed anode Dual-focus: large focus: 1.5, small focus: 0.6 Inverter frequency: 40khz Thermal capacity: 30kj (40hu) Videosystem Image intensifier : image intensifier made by toshiba (9ísíó 6ísíó4.5ís) Ccd vidicon : ultra low-light ccd camera imported from japan Monitor : horizontal 1000 lines and vertical 800 lines, Bandwidth : 12.5mhz, Image/sec : 75 Ccu(central control) : recursive filter: k=8, 8 images storage, Image upright, image overturnú¼positive & Negative imageú+lih(last image freeze, and Osdú¿monitor displayú¬ Structure Directive wheel : ía90íprevolutionú¼can freely change the moving Direction of the unit. Ascending & descend- Ing range of pillar : í²400mm C-arm : forward and backward movement: 200mm Revolution around horizontal axis: ía180íp Revolution around vertical axis : ía15íp Slip on orbit: 120íp(+90ípí½ -30íp) Packing details : 2440mmíß1100mmíß1420mm N.W. 300kgs g.W.400kgs Packing details : 2440mmíß1100mmíß1420mm N.W. 300kgs g.W.400kgs
High frequency x-ray machine Max rated capacity of photography íí 25kw Main inverter frequency íí 40khz X-ray tube Dual-focus Small focus:0.6 large focus: 1.3 Rotating anode speed 3000rpm Maximum tube current íí 200ma Tube voltage íí 40-125kv Mas íí 0.4-360mas
