Atten ST-100 100W ergonomically-styled 100W intelligent digital soldering station, Atten ST-100 is a newly designed, more intelligent, more reliable, more economical and more convenient digital small size soldering station with 80W heating element for temperature of 150 - 480 C. ATTEN ST-100 Solder station is more economical due it high performance and new features. Atten ST-100 100W Premium Intelligent Soldering Station Special Features : Smart recognition for working and non-working status. Intelligent cooling and temperature recovery. Automatic standby, shutdown to ensure personal and property safety which also can extend product life. Silver alloy heater to achieve quicker heating-up. Brand new design and LCD display screen to display various setting parameters. Newly designed menu which enable system setting easier. Visual control over operation process in which analogue heating-up strength status bar to indicate heating up status. 3 buttons to store and retrieve frequently used temperature values quickly. Temperature locking which make production line management convenient. Smart standby, shutdown function, adjustable standby time and adjustable shutdown time enable more energy saved and environment friendly. Touchtone which could be turned off and on. MCU controlled temperature calibration was designed to be more accurate and more convenient which keep this product in good performance for long time to come. This product was designed with low-voltage heater which is completely separated from power supply to keep soldering work safer. This product was designed to be compatible with AT800 series excellent soldering Tip which was assembled separately with heater to cut costs down. Separate iron stand to save room and to make soldering station placement easier. Technical Specifications : Optional Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz Power: 100W Heater voltage: 24VAC Temperature range: 150 Temperature offset range: Temperature accuracy: 10 C Temperature stability: 2C(in still air, no load) Automatic stand-by time: 1-120 minutes Standby temperature: 150 C Automatic shutdown time: 1-120 minutes Temperature adjustment: 5 digits (Default)/1 digit (Fine-tuning) Heater: Silver alloy heater Temperature lock: Yes Touchtone: Yes Tip-to-ground impedance: Tip-to-ground voltage:
90W Quick 203H digital display soldering station for Phone repair, microsoldering tool QUICK 203H lead free ESD soldering iron rework station. Intelligent QUICK 203H welding station for soldering work. QUICK 203H 90W ESD Soldering Station With Digital Display. Features: 1. Sensor close to Tip giving accurate Temperature Control 2. Fast heating and rapid thermal recovery 3. Suitable for lead-free soldering 4. Auto sleeping function available, energy-efficient. 5. With password lock function 6. Digital temperature calibration, the operation is simple and convenient. Specifications: 1. Temperature range:50-600 2. Power:90W 3. Size:245 235 130mm 4. Voltage: 220V/110V 5. Temperature stability: 1 6. Resistance for ground :
Upgrade YIHUA 995D+SMD Soldering Station, PHONEFIX 999D Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station power supply voltage: 110V,220V-240V power : 750W (max) Heat gun part Airflow Type: Brushless fan soft wind Temperature Range: 100 C 480 C Wind flow: 120 L/min (max) Temperature Stability: Good Display type: LCD Handle length: 100cm Soldering iron part Temperature Range: 200 C 480 C Temperature Stability: Good Tip-to-ground voltage: less than 2mV Tip resistance to ground: less than 2ohm Display type: LCD Handle length: 100cm Application: 1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (Especially mobile phone s cable). 2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
YIHUA 995D+SMD Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station Specification: Machine power supply voltage: 110V,220V-240V power : 750W (max) Heat gun part Airflow Type: Brushless fan soft wind Temperature Range: 100 C 480 C Wind flow: 120 L/min (max) Temperature Stability: Good Display type: LCD Handle length: 100cm Soldering iron part Temperature Range: 200 C 480 C Temperature Stability: Good Tip-to-ground voltage: less than 2mV Tip resistance to ground: less than 2ohm Display type: LCD Handle length: 100cm Application: 1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (Especially mobile phone s cable). 2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
JCID AiXun Face ID Dot Projector Precision Calibrator For Phone X XS/XR 11/11 Pro/11 Pro Max Faceid Flex Cable Alignment Repair Tool. Instructions: Step 01: Buckle the face ID module. Put the corresponding dot projector face lD module into the alignment calibrator base. Step 02: Put on the top cover Built In strong magnetic adsorption, fix it more firmly and align accurately. Step 03: Adjust the dot projector flex cable Move the cable slightly to complete alignment. Do not force the module. After alignment, there ls no gap between the cover plates. Product Size: 50mm 16mm 8mm Package Size: 85mm 55mm 25mm Features: 1. Precise alignment and quick fit. 2. Reset test of iron frame deformation. 3. Realize the standardized maintenance of dot projector alignment. 4. Standard positioning, magnetic reset. 5. Transparent polymer materials. 6. Suitable: X/XS/XSM+XR 11/11Pro/MAX
SS-T12A Heating Station Main Unit with T12A-X3 / T12A-CPU / T12A-F/ T12A-Face ID/ T12-andriod / T12-N12/ T12-N13 Motherboard Heating groove for Phone X-13 Pro Max Android Phone motherboard CPU Face ID repair. SS-T12A Heating Station Main Unit + Five kinds Motherboard Heating groove. T12A-X3 for X / XS / XMAX T12A-CPU T12A-F T12A-Andriod T12A-Face ID T12-N12 for Phone 12/12 Pro/12 Pro MAX/ 12 MINI T12-N13 for Phone 13/13 Pro/13 Pro max/13 mini Added T12A-N11 for phone 11 pro max motherboard SUNSHINE SS-T12A Phone X upper / lower motherboard pre-heating station adopt special heating design and precise temperature control capability, which will locate accurately locate the needed heating part. SS-T12A has dual bayonet design to make phone X motherboard stable. SUNSHINE SS-T12A has EU, AU, and US plug, 110V or 220V for your choice. Using high purity copper to guarantee heat transfer, which is not easy for deformed, durable and anti-wear. 100V-240V SS-T12A Phone X mainboard stratified 185 degrees accurate rapid separated disassembly heating station. Phone X logic board was folded in half, two layers then were soldered together, the upper layer is the mainboard, and the lower layer is the signal board. Which made our repair much difficult to proceed, how to repair Phone X logic board in fast and efficient method, need the professional Phone X motherboard repair tools Features : Adopting 185-degree layered process to remove the iP-X motherboard, not only from our fine analysis of iP-X solder paste ,but depends on the special heating design and precise temperature control of SS-T12A. SS-T12A only heats the area that the IP-X board needs to be removed to prevent improper heating. Dual bayonet design, make sure the iP-X motherboard is stable on the stage. High purity copper is used as a film to ensure uniform heat transfer and heat.
Film Shrinkage Test Equipment Film Shrinkage Tester GBK-D1 Film Shrinkage test, known as linear thermal shrink test or free shrink test, is used for analyzing the effect of temperature on heat shrinkable films made from polyethylene, ethylene copolymers and their mixtures. Basically, shrinking force, contracting force and shrinking ratio can be measured in such determination. GBPI Film Shrinkage tester conforms to the multiple national and international standards: ASTM D2732 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting ISO 14616 - Plastics Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures Determination of shrinkage stress and contraction stress DIN 53369 - Testing of plastic films determination of the shrinking stress Film Shrinkage Test Equipment GBK-D1 is used to determination of the degree of unrestrained linear thermal shrinkage and dimensional stability at different temperatures. Widely used in industries of plastic material, plastic products, petroleum, chemicals, research institute, inspection agency and so on. Principle This tester uses the principle of air heating to connect the tested sample to the tension sensor and displacement sensor. After reaching the maximum shrinkage force, it is placed in an external test environment with an ambient temperature of 23 to cool down. The reference temperature, shrinkage force and displacement are recorded, and the recorded data can be used to determine the optimal shrinkage conditions of the film. Standards ISO 14616, ASTM D2732, DIN 53369
Product Name : Antimagnetized wire thread insert supplier Material : Stainless steel, copper alloy, high temperature alloy. Advantage : High strength, high bearing capacity, high wear-resisting, high corrosion resistant Surface Treatment : Natural, silver plating, cadmium plated, colourful Specifications : GB/MS/MA/BS/AS Standard ones and customized Packing : Cartoons or wooden cases a professional design, research and development and production of thread inserts and tools of professional manufacturers. We produce customized thread inserts, self tapping inserts, tailless nesting, keensert and installation tools for inserts. We have also passed the GB / T 19001-2016 / iso9001:2015 standard and GJB9001c-2017 standard certification, and have relevant SGS certification.
Product Name : Tangless thread insert supplier Material : Stainless steel, copper alloy, high temperature alloy. Advantage : High strength, high bearing capacity, high wear-resisting, high corrosion resistant Surface Treatment : Natural, silver plating, cadmium plated, colourful Specifications : GB/MS/MA/BS/AS Standard ones and customized Packing : Cartoons or wooden cases More detailes please contact
Product Name : Wire thread insert repair kits Material : Stainless steel, 304 steel Type : Automatic, manual operation Application : For installing or removing or repairing the wire thread inserts Payment terms : T/T Packing : Cartoons or wooden cases
Product Name : Material : Stainless steel, copper alloy, high temperature alloy. Advantage : High strength, high bearing capacity, high wear-resisting, high corrosion resistant Surface Treatment : Natural, silver plating, cadmium plated, colourful Specifications : GB/MS/MA/BS/AS Standard ones and customized Warranty : 12 months Packing : Cartoons or wooden cases
When the 30KW electric rake winch for coal mines is used to rake the mine underground, the temporary fixing method is generally adopted, and there is no permanent fixed foundation. The fixing must be firm, and the fixing pile of the machine must be checked frequently for signs of loosening. Any problems should be dealt with in time to ensure the safe operation of the equipment. Model: 2JP-30/2JPB-30 Average pulling force of main wire rope (KN): 27.5 Main wire rope speed (m/s): 1.20 Sub wire rope speed (m/s): 1.60 Average wire rope speed (m/s): 1.4 Motor model: Y200L-4/YBK3-200L-4 Motor power (KW): 30 Main drum rope capacity (m): 70 Main drum dia (mm): 280 Main drum width (mm): 156 Main wire rope dia (mm): 16 Main wire rope structure: 619 Main wire rope minimum breaking force (KN): 143
Pipeline system inflatable air grip union Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections. Features Low requirement to centered when installed, to achieve quick install and seal. The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance. No wrenches, bolts & nuts required. Fast and easy make up without close alignment. Pneumatic Tube inflatable up to 200 PSI.
Human anatomical model, human skeleton model, human torso model, biological models, botany models, animal anatomical model, medical training simulators, nursing simulators.
Ev charger, power tool, power station, tesla adapter, tesla to ccs2, portable ev charger, charging pile, ev charger cable, j1772 charger.
Steel Product, Machine, Hardware, Tool..
Tools like cutting, welding tools.
Cnc, lathe, cutting tools.
Head rotors, nozzles, plungers, diesel injectors, delivery valves, pencil nozzles, common rail parts.
Marine equipment, marine winch, marine windlass, marine capstan, marine crane.
