Weight 26KG Length 660mm Cylinder Diameter 80mm Piston Structure Stroke 60mm Working Air Pressure Mpa 0.4 0.5 0.63 Full length Rock Drilling Impact Frequency Hz(Greater or equal to) 28 35 36 Drilling Gas Consumption L/s(Less than or equal to) 52 58 82 Impact Gas Consumption J(Greater or equal to) 44 63 70 Rotary Torque N m(Greater or equal to) 15 19 23 Drilling Speed Mm/Min(Greater or equal to) 250 400 470 Noise dB/A(Less than or equal to) 124 125 127 Average linear m before first failure M(Greater or equal to) 400 Drilling Depth Without Dismantling Machine M(Greater or equal to) 300 Inner Diameter of Gas Transmission Hose mm 25 Inner Diameter of water Delivery Hose mm 13 Borehole Diameter mm 34-42 Drill Tail Specification 22x108 ±1 Air leg length(mm) 1400 Advance Stroke MM 965 Cylinder Bore(mm) 65
14t mining trolley traction locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52*2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
60m3 Loading Capacity Wheel Belt Type Mining Muck Loader Product Description The multifunctional mine muck machine is a new type of loader developed to improve labor intensity and work efficiency. The machine can directly transport rocks to the conveyor belt. The machine adopts full hydraulic control mode, which is simple and convenient to operate. The gantry frame of the machine is detachable and non-cut, which is convenient for installation in the well. In addition, the height of the rear unloading can be adjusted according to the customer's own needs. The machine is equipped with an adventure device to solve the danger of manual exploration. This machine can be used in a cave below 2.2 meters, and the loading capacity per hour is between 40-60m. Application Mine slag raking machine is mainly used for phosphate ore, aluminum ore, iron ore, copper ore, , silver ore, lead-zinc ore and other mines, hydropower, tunnel projects in narrow-space mining operations. And transportation, construction and loading. The mining slag raking machine is a combination of a manipulator and a conveyor. The slagging and conveying and loading functions are combined into one. The production device adopts an electric full hydraulic control system. It has the characteristics of safety, environmental protection, low energy consumption, and high efficiency. It is an indispensable advanced mining equipment for mining enterprises and a substitute for labor and other machinery. Specification Model : ZWY60 Loading capacity m3/h : 60 Weight kg : 3100 Digging width mm : 3000 Digging height mm : 2150 Digging depth mm : 500 Digging distance mm : 1400 Gradeability : 5 Unloading height mm : 1300 Can be heightened Unloading distance mm : 1500 Can be lengthened Minimum turning radius 5 Power kw : 11 Walking speed km/h : 1.45 Maximum passing size of material mm : 600 450 Wheelbase mm : 1480 Wheel distance mm : 1180 Adaptation dimensions m : 2.2 2.2 Product dimensions mm : 5500 1550 1650
The electric rock loader is a rock loading machine with a single bucket, front loading and rear unloading, and walking on the track. Its purpose is to load the rock or ore from the blasting caving into the mine cart behind. The range of loaded materials is very wide, such as: gold, non-ferrous metals, black metals, non-metals and other ores and rocks. The maximum diameter of the loaded material can be up to 500mm, and the highest efficiency is when the diameter is below 250mm. This machine is a non-explosion-proof product, and it is strictly prohibited to use it in an environment with flammable and explosive gases such as gas. Model: ZQ-26 Loading capacity m3/h: 40-50 Loading area m3: 0.26 Loading width m: 2.7 Track gauge mm: 500,600,762 or 900 Power kw: wind motor Walking power kw: 10.5 Lifting bucket power kw:15 Unloading height mm: 1250 Dimension mm Length : 2440 Width: 1380 Height: 1500 Weight kg: 2700
Mining Wagons for Underground Powered by Locomotive The mine car is a narrow-gauge railway transportation vehicle for transporting bulk materials such as coal, ore and ballast stone in the mine. Generally, it must be drawn by a locomotive or a winch. According to different structures and unloading way, it could be divided into: fixed mine car, bucket-tipping mine car, single-side curved rail dumping mine car, bottom-dumping mine car, material vehicles, flat car, shuttle mine car, etc. Model: MCC1.6-5 Volume (m3): 1.6 Loading capacity (kg): 4000 Gauge (mm): 600 Length (mm): 2500 Width (mm): 1200 Height (mm): 1300 Wheel base (mm): 800 Wheel diameter (mm): 350 Traction height (mm): 360 Allowable traction (KN): 60 Box wall thickness (mm): 5 Minimum radius of curvature (m): 9 Unloading angle (): 42
The electric rock loader is a rock loading machine with a single bucket, front loading and rear unloading, and walking on the track. Its purpose is to load the rock or ore from the blasting caving into the mine cart behind. The range of loaded materials is very wide, such as: gold, non-ferrous metals, black metals, non-metals and other ores and rocks. The maximum diameter of the loaded material can be up to 500mm, and the highest efficiency is when the diameter is below 250mm. This machine is a non-explosion-proof product, and it is strictly prohibited to use it in an environment with flammable and explosive gases such as gas. Model: ZQ-26 Loading capacity m�³/h: 40-50 Loading area m�³: 0.26 Loading width m: 2.7 Track gauge mm: 500,600,762 or 900 Power kw: wind motor Walking power kw: 10.5 Lifting bucket power kw:15 Unloading height mm: 1250 Dimension mm Length : 2440 Width: 1380 Height: 1500 Weight kg: 2700
10 ton mining tunnel locomotive The model has two types of nominal working voltage: 250v and 550V. It applies main driving mode, IGBT shear wave type speed control or resistance type or VF type. The main features include: short wheelbase, high rigidity of the vehicle body and good crashproof performance. The type of braking is mechanical or electrical. Both mechanical and electrical braking have a safe and reliable effect. Adhesive/total weight (t): 10 tons Track width (mm): 600,762,900 Tensile (KN): 13.05 18.93 Max. Tensile (KN): 24.5 Speed â??â??(km/h): 11, 10.5 Power (KW): 21*2 30*2 24*2 Dimensions Length (mm): 4550, 4650 Width (mm): 1050, 1212 or 1350 Height (mm): 1600 Wheelbase (mm): 1100 Wheel diameter (mm): 680 Minimum curve radius (m): 7.10 Driver: Resistor or IGBT Braking method: Mechanical
3 ton trolley wire locomotive for mining What Should We Pay Attention to When Using Underground Mining Electric Locomotives? Operating underground mining electric locomotives is a critical task that requires a high level of responsibility and safety awareness. To ensure safe operation, operators should heed the following guidelines: Monitor Bearing Temperature: Pay close attention to the temperature of the axle box, motor bearings, and gearbox bearings to prevent overheating and potential damage. Be aware of any burning smells, as this is a typical sign of overheating bearings. Regularly check the bearing lubrication oil to ensure it is adequate and meets the required specifications. Inspect the Brake System: Regularly inspect the brake shoes for wear and replace or adjust them as necessary. Ensure the brake system is functioning correctly, and that the braking distance meets specified requirements. Periodically clean the brake system of dust and grease to maintain its cleanliness and efficiency. Immediately Address Electrical Equipment Failures: If any electrical equipment, lights, or horns fail, cease operations immediately and take the locomotive to the garage for repairs. Do not continue to operate the locomotive with any faults, as this could lead to safety incidents. Strictly Follow Shift Handover Procedures: At the end of a shift, operators should conduct a thorough inspection of the locomotive, including: Checking bearing temperatures, the brake system, and electrical equipment. Inspecting the locomotive's exterior for any damage. Listening for any unusual sounds from the locomotive. Record all inspection results in the shift handover log to inform the incoming operator of the locomotive's condition. Additional Precautions: Adhere strictly to the mine's management regulations. Familiarize yourself with the locomotive's operating procedures and maintenance methods. Regularly participate in safety training and drills to enhance safety awareness and emergency response capabilities. By strictly following these precautions, operators can effectively prevent accidents when using underground mining electric locomotives, ensuring their own safety and the safety of others. Adhesive weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 or 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical
8 ton battery electric locomotive for metal mine Total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake
CJY14 ton trolley wire locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52 2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
