Descriptions: Heat Resistant Green Polyester PET Film Tape For Spray Coating also name PET High temperature masking tape, it is a polyester film tape with a high temperature silicone adhesive. Designed for powder coating masking, high temperature painting and galvanization. Features: High temperature resistance Strong adhesion Flexible and conformable Peeled off without leaving an adhesive residue Applications: Powder coating masking High temperature painting Galvanization
Carbon Nano Tube CNT Copper Foil Thermal Conductive Tape Descriptions: CNT Copper Foil Tape, also name Carbon Nano-tube (CNT) Copper Foil Thermal Conductive Tape, coated one layer of Nano carbon on the surface of the copper foil, coated with the not conductive acrylic adhesive on the other sided. Features: Excellent thermal conductivity. Reliable ESD ground and EMI shielding. Comparing with graphite, CNT film does not peel off during cutting process. Flexible, reusable, re-workable and cost effective. Applications: Mobile, Phone, Pad, Industrial Computer, TV, LED.
Descriptions: Thermal Conductive Thermal Phase Change Interface Material is a new type of sheet made of a non-silicone-based phase change material. These sheets change phase in response to heat. The heat generated by a CPU or other devices causes the sheet to change from a solid to a fluid phase, resulting in lower thermal resistance superior heat dissipation. Features: High thermal conductivity. Excellent thermal transfer properties, easy to use. Heating applying pressure further thins the sheet, resulting in extremely low thermal resistance. Exhibits stable thermal properties over long-term use. Applications: Not to be used in case where electrical insulation is required, mainly used in heating devices, such as: the computer industry, integrated circuit market, mobile phone industry, network, communication equipment, automotive electronics, LED lighting, aerospace.
Proffessional Black Matte Non Reflective Cloth Stage Tape Gaffer Tape Descriptions: Gaffer tape is a matt gaffer tape specially designed for the arts and entertainment industry. It consists of a PE coated woven PET fabric backing coated with a pressure sensitive natural rubber adhesive. It is the ideal solution for a wide range of applications whenever a non-reflective surface is important. Features: light-absorbing, non-reflective good adhesion, even on rough surfaces abrasion resistant water repellent conformable easy to remove available in matt black, matt white, and matt silver Applications: On-stage/back-stage jobs in theatre, opera, cinema and music halls Fixing of cables on carpets, walls etc. Covering of shiny and glossy surfaces Fixing of cable links Sealing of joints Floor marking and fixing
Self Adhesive Fiberglass Mesh Tape Descriptions: Fiberglass Mesh Tape, also call Bi-directional filament tape, a kind of bi-direction reinforced filament tape backed with fiberglass on the base material of PET. Hot melt sealing tape. Good abrasion resistance and high strength. Suitable for heavy goods bundling and package reinforcing. Features: Abrasion and moisture resistant. High tensile strength. Allows printing and illustrations to be seen through the tape. Good shear and initial adhesion. Protection of filaments and adhesive to provide longer package life. Good holding under wide range of application conditions with minimum amount of tape. Less tape needed at lower cost for applications where high tensile streng this a main requirement. Applications: Mainly used for packaging heavy, strong bonding, electrical components fixed. Used in repairing the crack and joints or holes of drywall, plasterboard, stucco; and repairing other damages in other wall surface.
Insulation Mylar PET Polyester Film Sheets Coated With Adhesive Descriptions: Polyester Sheets(PET Film), is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties, and electrical insulation. Features: High purity. Degree of uniform thickness. Good insulating property and temperature resistance. Have no concave or convex ,no scratch etc. Applications: It is widely used for electrical insulating gasket,electric appliance,adhesive products,Printing industry,adhesive lables,die-cutting,stamping
Descriptions: Teflon PTFE Thread Seal Film Tape of Xinst brand is an ideal tape for sealing, which is widely applied in construction machinery, chemical industry and other areas, especially in pipe linking systems such as building sealing tape. With excellent characteristics of our tape such as sealing insulativity, acid-resistance, and corrosion-resistance, it can be widely used under all conditions for a long term. Features: Pressure: to 10,000 PSI (690 BAR) Sealing temperature: -450°F to 500°F (-268°C to 260°C) 3 mils thick and made with PTFE for greater sealing power Applications: Pipe thread sealant for oxygen systems Water pipe head seal
Descriptions: Insulation Pure Teflon PTFE Film Tape is based on pure Teflon film, single-sided coated with high-temp resistant pressure sensitive adhesive.The PTFE Tape are widely applied in the conduct roll for resistance of high temperature, acid, alkali and non-stain of the surface, protecting with the low friction of heating up flat, pulling off of the plastic model, joining and binding up cable of high temperat-ure and high-pressure with anti-static, protecting with the electrical components joi-ning in hith temperature, affixing of the hot plastic parts. It can be used conveniently, long-lived and have good insolation. This tape can be well used in the temperature range of -60°C ~+260°C. Features: It has very pesistant adhesion and can adhere reliably in a temperature range of -60°C to +260°C Easy to wash away the blot or other dust on the surface such as resin, coating material, etc. High chemical corrosion resistant: it could resist acid, alkali, aqua fortis and various kinds of organic liquid corrosion. Capability of medicament resistant and non-poison, almost to resist all kinds of medicament. High capability of insulation. Fireproofing and flame resisting. Easy to use and install, reusable, and own long using life. Applications: Sorts of high temperature roller submerging, works of calefaction slab, membrane doffing. Heat sealing of food, pharmaceutical and plastic bag. Cushion pasting of slippery pond, stuff funnel, aircraft mould, etc, it also could be used on platern, thermoplastic doffing module. Suitable for other surface disposal such as glue proofing, corrosion resistance, high temperature resistance. Used in the fields of packing (including thermoplastic, vacuum bagging),compositing, thermoplastic seal, electronic and electric.
Manufacturer Die Cut Double sided PU/EPDM/Sponge/EVA CR Foam Tape CR/EPDM Foam Tape belonging to excellent overall performance rubber, which itself has flame retardant properties, also has oil resistance properties. High density, good elasticity. CR foam tape is CR foam one sided or two sided coated with adhesive CR/EPDM Foam Tape Features: Independent holes, closed bubble, sealing resistance, low water absorption. Outstanding flame retardant from the fire that is self-extinguishing, to UL96 HF-VO level, into carbon fast, good weather resistance. Cell delicate, good resilient, cushioning, thermal insulation, sound insulation, good sealing, shock effect is superior. CR/EPDM Foam Tape Applications: Precision machinery, medical equipment, furniture, glass cushioning protection. Vehicles, ships, doors, baggage window seal. Air-conditioning, refrigeration equipment insulation, insulation. Civil construction waterproofing. Machinery and equipment, residential soundproof wall sealed, moisture, and shock. OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you. Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton.
Key Specifications/Special Features: OEM designs/services offered Exquisite appearance and fashionable widely use Acrylic foam as the substrate, two-sided soaking altered acrylic adhesives Has strong adhesive force, excellent shock absorption properties and anti-cracking High temperature-resistant to anti-solvent, anti-plasticizer and good sealing Top grade VHB foam tape application Widely used in automotive interior parts, door trim, rain gear, paste the fixed signs, home appliances, decoration, curtain wall structural adhesive fixed Auto trim, auto glass, auto pedal, seals, surfers, round arc, block flow, plate brake light Down at the car fixed plate bonding Features: exceptionally strong adhesive, waterproof and car signs Thickness: 1-3mm Length: available as customer's requirements Width: available as customer's requirements Packing: shrink film, common carton/box packed Adhesive power (to stainless steel): 3000gf/25mm Initial adhesive (steel ball test): 13 ball no Holding power (to stainless steel): 72 hours Tensile strength: 18kgf/25mm Temperature resistant: 20 to 60&176Dg
Shockproof Sponge PORON Foam Tape Sheet Descriptions: PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. PORON cellular urethane foam was engineered to have excellent memory (compression set resistance). The compression set resistance of PORON makes it a top pick for sealing and cushioning electronics. PORON urethane foam is manufactured by continuously casting and curing mechanically mixed formulas to the desired thickness. PORON foam tape is using PORON foam as backing material and coated with one side or two sided different kinds of adhesives. Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning. OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you. Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 C to 80F (16 C to 27C) and 40 to 60% R.H. in the original carton.
Pipeline Seal Waterproof Butyl Rubber Double Sided Tape Descriptions: Butyl rubber double sided tape is made by butyl rubber, the feature is waterproof,corrosion resistance, weather resistance, chemical resistance and sealing tightness, which is mainly used for building construction's sealing usage. Features: Excellent waterproof sealing property Safe and environment friendly Strong chemical and UV resistance Permanent flexibility and adhesion Solvent free Applications: Connecting for steel roof color plate and roof lighting sheet The adhesion of cement, lumber, PC, PE, PVC and CPE material Sealing and waterproof of windows, doors, concrete roof, vent line etc.
Light Shielding PET Film Black And White Double Sided Tape For TFT-LCD Descriptions: Black and white tape consists of a white PET film carrier coated with black color, and a high performance acrylic adhesive. It features excellent initial tack and good convertability. Features: Good adhesion to many kinds of materials including most plastics, glass and metals. Excellent light insulation. High light reflectance. Easy converting by die-cutting. Applications: Light insulating applications in electronic devices. General purpose indoor and outdoor joining and mounting applications. Holding and bonding in electronic device components like BLU bonding to LCDs,BLU module bonding or appliance bonding.
Equivalent To Tesa 4965 PET Film Double Sided Adhesive Tape Descriptions: PET Film Double Sided Tape is polyester film, double coated with an aggressive permanent acrylic adhesive system. It offers a wide temperature range and can be used for bonding a variety of films, including flexible substrates. This double sided polyester tape is used for splicing, mounting, bonding and application of decorative parts. Ultra-Thin PET film double sided tape is use ultra-thin PET film double sided coated with acrylic adhesive. Features: Excellent adhesion strength. Superior holding power. Good temperature resistance, Ultra-Thin thickness. Applications: Fixing mobile phones, computers, auto parts and other plastics, metal, electrical components. Coated with EVA foam, PE foam, PORON foam, then die cut. For bonding LCD backlight module frames, shading and reflecting. Bonding ferrite with objects or FPC with stiffener. Bonding graphite with phone cover or chips, and do not affect the graphite thermal conductivity.
Die Cutting EMI/RFI Gasket Conductive Fabric Foam Tape Strips Conductive fabric foam tape is single sided electrically conductive self adhesive foam tape. It consist of a perforated foam with electrically conductive coating and an electrically conductive adhesive. Conductive fabric foam tape Features: Excellent electrical conductivity in XYZ-direction even at high temperatures and humidity High adhesion level even at harsh environmental conditions Very good shock absorbing and cushioning properties High stability of the foam to avoid flaking of particles Conductive fabric foam tape Applications: EMI shielding and grounding applications Electrostatic discharge applications
Double Sided Cloth Duct Tape For Carpet Descriptions: Cloth double sided tape consists of a tear resistant flexible fabric backing with a rubber adhesive system. Used as a carpet tape in the trade show and exposition industry. Easy removal when trade shows need to be dismantled. Other applications include temporary mounting for assembly or machining operations and print plate mounting. Features: Carpet laying: underlay joining, carpet joining and carpet edging. Construction: ideally suited for joining polythene and many other materials. HEVAC: sealing metal and plastic ducting, cladding and unfacing fiber panels. Manufacturing: splicing and joining in manufacturing processes. Moto sports: "tank tape' leading edge and surface protection. Masking off and temporary repair. Applications: Ideally suited for repairing greenhouses and hotbeds. Sealing of joints and chinks between pipes. Panels and in bodies. Useful in water and sanitary engineering works. Sealing of containers to protect goods against water and moisture Makes mirror durable and safe(the tape is applied to the reverse of a mirror prevents its breaking to fragments).
ESD Anti-static PVC Warning Tape Descriptions: Anti-static PVC Tape,also call ESD warning and marking tape,it is made of excellent pvc film, coated with high quality pressure sensitive adhesive. PVC film surface printed with ESD symbol and "Caution, Static Sensitive",used for floor marking in "Electrostatic Protected Areas" (EPA) , heavy duty and abrasion resistant. Features: The esd marking tape is heavy duty and abrasion resistant. Compatible with floor cleaners. Color: yellow with black printing. Applications: ESD marking or warning. ESD protected area.
Descriptions: Hook and Loop Tape, Adhesive Back Hook and Loop has rubber-based pressure sensitive adhesive tape,it bonds very well to hard surfaces and can be used in both high and low temperature environments. These rolls of adhesive back hook and loop tape are great to have on hand for hanging everything from attaching signs, graphics on displays, computer components, construction projects, posters and pictures on walls to fastening bed skirts and securing pillows in cases. These large rolls are a great value. Features: It has great sticky power,functioning in -40*C to +90*C. Can be cutted into any shapes as the customers' request. Paste to anywhere, easy to DIY . Applications: Furniture, packing gift box, document, helmet, Garment, Shoes, office, school, houshold, industry, hospital and so on.
Anti-static ESD Polyimide Film PI Tape,also call ESD Polyimide Tape,also known as ESD Kapton tape, consists of low static polyimide film coated with silicone adhesive to withstand temperature up to 260â?? (500, packaged in a 36 yard (33m) roll. This tape generates extremely low levels of triboelectric charge when it is unwound from the roll and also when removed from most surfaces on which it is placed. This makes the tape an excellent choice for use near electronic components and assemblies. Features: Excellent electrostatic dissipation High temperature resistance up to 260â?? (500 No adhesive residue after removal Good adhesion Flame resistance UL V-0 Chemical and radiation resistance Applications: Anti-static PI Tape is the optimal product for electrostatic dissipation. This tape can be used for wave soldering, masking of printed circuit boards during conformal coating, gold leads and other components on boards filled with sensitive integrated circuits.
Thermal Conductive Polyimide Kapton PI Film Descriptions: Thermal Conductive Polyimide Kapton PI Film also call thermal conductive kapton film,it is a thermally conductive film, possesses higher thermal conductivity properties than standard polyimide film. This property makes it ideal for applications requiring efficient thermal energy transfer, such as loudspeaker voice coils frame, electrical insulating pads and flexible printed circuit board. Moreover it also can offer an excellent combination of electrical, physical and mechanical properties. Features: Excellent thermal conductivity Good dimensional stability Chemical resistance High and low temperature resistance Applications: Voice coil frame of loudspeaker Flexible Printed Circuit (FPC) Insulation Pads (heat sink) Ceramic board replacement
