As the first bolted steel tanks manufacturer in China, Center Enamel has designed, manufactured and installed bolted steel potable water tanks for more than 30 years. we can supply you with a new bolted steel tank suitable for corrosive and non-corrosive liquids and chemicals, ranging in capacity from 500 Gallons to 4,000,000 Gallons. All our bolted steel potable water tanks are ready for sale. When constructing bolted steel potable water tanks, the selection of the best material is an important quality factor. Bolted Glass Fused to Steel potable water tank is the only tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with corrosion resistance of the glass, which are ideal if you need to store municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries. Bolted tanks are made from individual sections that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks.The installation time for bolted tanks depends on the sizes of the tanks installed, and the complexity of the installation process. Normally, the installation is very quick, often requiring less than a third of the time it typically takes to complete a welded or a concrete tank. Center Enamel is the leader in bolted steel potable water tank in China, Glass Fused to Steel tanks and Bolted steel tanks. We offer the most complete array of tanks for storing potable water for Commercial, Industrial, and Residential applications. Whether you're looking to potable water storage tank , our bolted steel tank is the perfect choice for your potable water storage project. Center Enamel can make even the most complicated tank projects go smoothly. Send your requirement, our bolted steel potable water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. When it comes to potable water Storage, make it Center Enamel. rted. More info in http://www.cectank.com/potable-water-tanks/
As the first bolted steel tanks manufacturer in China, Center Enamel has designed, manufactured and installed bolted steel potable water tanks for more than 30 years. we can supply you with a new bolted steel tank suitable for corrosive and non-corrosive liquids and chemicals, ranging in capacity from 500 Gallons to 4,000,000 Gallons. All our bolted steel potable water tanks are ready for sale. When constructing bolted steel potable water tanks, the selection of the best material is an important quality factor. Bolted Glass Fused to Steel potable water tank is the only tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with corrosion resistance of the glass, which are ideal if you need to store municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries. Bolted tanks are made from individual sections that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks.The installation time for bolted tanks depends on the sizes of the tanks installed, and the complexity of the installation process. Normally, the installation is very quick, often requiring less than a third of the time it typically takes to complete a welded or a concrete tank. Center Enamel is the leader in bolted steel potable water tank in China, Glass Fused to Steel tanks and Bolted steel tanks. We offer the most complete array of tanks for storing potable water for Commercial, Industrial, and Residential applications. Whether you're looking to potable water storage tank , our bolted steel tank is the perfect choice for your potable water storage project. Center Enamel can make even the most complicated tank projects go smoothly. Send your requirement, our bolted steel potable water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. When it comes to potable water Storage, make it Center Enamel. rted. More info in http://www.cectank.com/potable-water-tanks/
Center Enamel supply a range of Glass-Fused-to-Steel fire protection water storage tanks suitable for use in automatic sprinkler systems and fire hydrant systems. We design, manufacture and installation these fire tanks for over 30 years, we are the first Glass-Fused-to-Steel tanks manufacturer in China. With compliance to NSF61,Center Enamel s standard range of water storage tanks for fire protection are available in 20 steres to 20,000 steres and meets international water tank design standards. Glass-Fused-to-Steel tanks are made from individual sections that have been manufactured and finished in a controlled factory setting. This allows each section to be formed according to strict structural specifications, with quality bends, welds and surface preparations that are monitored with compre hensive quality control measures. Once the sections are complete, they are powder-coated in a tightly-controlled environment, which results in a durable finish that virtually eliminates corrosion and maintenance issues; unlike field-welded tanks, which must be finished at the installation site, often resulting in an imperfect and inconsistent finished coating that is susceptible to corrosion and other damage. Glass-Fused-to-Steel tanks are created with superior materials that meet AWWA, NFPA, and FM Global standards, resulting in a long-lasting, durable product. They offer lifespans that are similar to, or longer than, concrete or welded tanks. Unlike competing products, they can easily be repaired by unbolting the damaged section, replacing it and installing new gaskets and fasteners. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. CEC Glass-Fused-to-Steel tanks are wildly used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
A fire-protection water storage tank can make all the difference when a fire breaks out. Water is the most common extinguishing agent for combating fires. Water is so fundamental to firefighting that a good water supply is one of the most important factors in municipal fire protection. Fire protection water storage tanks are not just for residential properties and have been developed to the point where they are now a common sight at many commercial and industrial construction sites, including airfields, airports, schools, universities, hospitals, prisons, police stations, office buildings, data centers, and other facilities that need a reliable or redundant water supply. Having these tanks on commercial properties takes away the worry of having a shortage of water should a fire occur. In many cases, fire protection water storage tanks provide the water necessary for fire suppression purposes inside the building. Center Enamel offers fire protection water storage tanks from 20 to 18000 steres. All of our fire water tanks are certified by NSF61. This standard provides requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection. Center Enamel is a China manufacturing company located in Shijiazhuang, Hebei province. Our product categories range from fire water tanks, Glass-Fused-to-Steel tank, wastewater tank, biogas tank, anaerobic digesters, dry bulk storage tanks, and other storage solutions. Benefits of Center Enamel Fire Water Storage Tank? Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labors Tank volume can be easily expanded It can be dismantled, removed and relocated Elegant appearance, tank color can be customized
Selection of an appropriate biogas storage tank makes a significant contribution to the efficiency and safety for each biogas project. Glass-Fused-to-Steel tank with high airtightness is the best option for the biogas storage tank, which has been tested and proven over the decades. Now Glass-Fused-to-Steel tank is an integral feature in the design of any modern biogas project worldwide. Anaerobic digestion is an efficient, cost-effective way of converting biomass to energy, which also provides a sustainable solution for the disposal of animal byproducts. In biogas processing project, manure, wastewater solids, agricultural residues and food scraps are delivered to an anaerobic digester tank. The anaerobic digestion process uses microbes to break down the organic material through a fermentation process under controlled conditions, resulting in clean biogas and digested material. That digested material is then used to make fertilizer, compost, soil amendments or animal bedding. The raw biogas is further processed and water, carbon dioxide and other trace compounds are removed, and then the leaving methane and other trace gasses can be stored in the biogas storage tank. The processed biogas is then distributed and used for producing electricity, heat and fuel, or injected into natural gas pipelines. Biogas provides a clean, repeatable source for energy and fuel, while also making use of organic materials that might otherwise end up in a landfill. What is Glass-Fused-t0-Steel Tank? Glass-Fused-To-Steel Tank is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also was known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). All the Glass-Fused-To-Steel are passed the 1500V holiday test before delivered to our customer, which can make sure that Glass-Fused-To-Steel is in best quality condition with high airtightness.
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large. Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
Fire protection water storage tanks can be used in commercial, industrial, residential or rural areas for fire protection. In emergency fire situations, the demand for water may exceed the supply of household water pipes, especially in suburban or rural areas where well water supplies are limited. Therefore, it is very necessary to set up fire protection water storage tanks in commercial, industrial, residential or rural areas. The use of fire water storage tanks can greatly improve emergency fire protection work, and may even be used by hotels, commercial office buildings as automatic fire sprinkler systems for on-site water supply. Center Enamel Glass-Fused-to-Steel tank is the best choice for fire protection water storage tank. As the most professional Glass-Fused-to-Steel tanks manufacturer in Asia, we have many successful fire protection water storage projects in the world. All the Fire protection water storage Tanks are conformed to the American Water Works Association (AWWA) D103-09 and OSHA, also certified by NSF61. Compliance with both drinking / potable water storage standards and fire water protection standards allows the same Glass-Fused-to-Steel tank for both applications, as well as creating a dual use. In addition, we can customize the fire water storage solutions according to the requirements of customers and local conditions. High-quality design, meeting a wide range of international standards, constructed from corrosion resistant materials. Fire protection water storage tanks also can be designed to meet earthquake and wind conditions. Advantages of Fire Water Tanks 1. Short Construction Period: compare to over 90 days of construction time of concrete tank, it takes even less than 15 days for installation of GFS Fire Water Tank. 2. Beautiful Appearance: the color of glass fused to steel tank could be customized as the clients request based on Pantone Matching System. 3. Long Service Life: the Center Enamel GFS Tanks are designed to work in long service life as more than 30 years. 4. Tank Volume can be easily expanded: GFS Fire Water Tanks are not only easy to constructï¼? but also convenient to expand, remove and rebuild.
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large. Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
Biogas storage tank is also called biogas holder and is a kind of Anaerobic digestion tanks which are often cone shaped and supported at the centre with a single pole. The outer layer of membrane roof works as the protection for the inner membrane . The outer membrane is more strong and coated with UV resistance coating . Outer membrane can be against static electricity, ultraviolet radiation and aging. Inner coat can be against biogas leakage. Why use Glass-Fused-To-Steel Tank for biogas storage tank ? 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are the exceptional solution in most harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shutdown during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. Tank can be dismantled and rebuilt, gives continuous asset value to the product. Except for biogas storage tank , Center Enamel Glass-Fused-to-Steel tanks can also be used as various anaerobic digester , various aerobic reactor , such as SBR , CSTR , USR , EGSB , UASB , etc
Fire protection water storage tanks can be used in commercial, industrial, residential or rural areas for fire protection. In emergency fire situations, the demand for water may exceed the supply of household water pipes, especially in suburban or rural areas where well water supplies are limited. Therefore, it is very necessary to set up fire protection water storage tanks in commercial, industrial, residential or rural areas. The use of fire water storage tanks can greatly improve emergency fire protection work, and may even be used by hotels, commercial office buildings as automatic fire sprinkler systems for on-site water supply. Center Enamel Glass-Fused-to-Steel tank is the best choice for fire protection water storage tank. As the most professional Glass-Fused-to-Steel tanks manufacturer in Asia, we have many successful fire protection water storage projects in the world. All the Fire protection water storage Tanks are conformed to the American Water Works Association (AWWA) D103-09 and OSHA, also certified by NSF61. Compliance with both drinking / potable water storage standards and fire water protection standards allows the same Glass-Fused-to-Steel tank for both applications, as well as creating a dual use. In addition, we can customize the fire water storage solutions according to the requirements of customers and local conditions. High-quality design, meeting a wide range of international standards, constructed from corrosion resistant materials. Fire protection water storage tanks also can be designed to meet earthquake and wind conditions. Advantages of Fire Water Tanks 1. Short Construction Period: compare to over 90 days of construction time of concrete tank, it takes even less than 15 days for installation of GFS Fire Water Tank. 2. Beautiful Appearance: the color of glass fused to steel tank could be customized as the clients request based on Pantone Matching System. 3. Long Service Life: the Center Enamel GFS Tanks are designed to work in long service life as more than 30 years. 4. Tank Volume can be easily expanded: GFS Fire Water Tanks are not only easy to constructï¼? but also convenient to expand, remove and rebuild.
Wastewater storage tanks is a kind of common wastewater treatment equipment in the field of wastewater treatment. There are many kinds of complicated corrosion forms in wastewater, such as acid-base corrosion, atmospheric corrosion, abrasion, penetration type expansion crack and microbial corrosion of bacteria and algae, which seriously affect the service life of the wastewater treatment tank. Therefore, the wastewater treatment needs to use an excellent performance Glass-Fused-To-Steel tank to meet or exceed environmental standards. Center Enamel provides a reliable, durable and high-quality wastewater storage solution. Center Enamel Glass-Fused-To-Steel tank is the best option for wastewater storage. Center Enamel's Glass-Fused-to-Steel Tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our GFS tank engineers make the tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., Center Enamel storage solution to agricultural industry offers the following benefits: 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are an exceptional solution in the harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shut down during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. The tank can be dismantled and rebuilt, gives continuous asset value to the product.
With the promotion of renewable bio-energy in recent years, biogas project has become one of the important ways to increase farmers' income. The application of biogas can effectively alleviate the contradiction between agricultural breeding and environmental protection. The traditional concrete pool and normal steel structure tanks used in biogas project don't offer these advantages. The construction of concrete tanks is complicated, with long period installation and high maintenance cost, which is not suitable for small and medium-sized biogas project, Our Glass-Fused-To-Steel Tanks can solve the above problems, and also has the advantages in Fast installed, easy expanded, dismantled and relocated. That is why more and more people choose Glass-Fused-To-Steel Tanks as Anaerobic Digester Tank Glass-Fused-to-Steel is two materials - Enamel glaze and steel plate surface are fused together after heat treatment at 850-940 and then create a tough and inert bond, which combines the strength of steel with the outstanding chemical and physical corrosion resistance of glass. Glass-Fused-to-Steel Tanks is the excellent option for Anaerobic Digester Tank, which can be composed of Glass-Fused-to-Steel Tank and double membrane roofs as Integrated tank for fermentation, gas generation and gas storage. Center Enamel Co., Ltd (Shijiazhuang Zhengzhong Technology Co., Ltd) is a professional manufacturer dedicated in industrial and household enamel products design and fabrication since 1989. We are not only the first one in China to produce Glass-Fused-to-Steel tanks, but also the most professional Glass-Fused-to-Steel tanks manufacturer in Asia. it will be very glad to receive your email for products informati
To feed the growing world population, increasing agriculture production is required. under such circumstance, premium containment solution is required for crops & forage storage, manure, sludge, irrigation during agriculture production. Agriculture waste such as livestock and poultry manure and energy crops are an important part of the global growth of green renewable energy solutions. Center Enamel Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life for more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. Center Enamel Glass-Fused-To-Steel Water Tanks for irrigation in agriculture. In order to ensure the normal growth of crops and obtain high and stable yield, it is necessary to supply crops with sufficient water. Under natural conditions, crop water requirements are often not met due to insufficient precipitation or uneven distribution. Therefore, artificial irrigation is necessary to make up for the lack of natural rainfall. Also, we can use Glass-Fused-To-Steel Tanks to Collect and store rainwater that falls onto buildings and using it for agricultural purposes, which can cut the bill of irrigation water. That is why we choose Glass-Fused-To-Steel Tanks as for irrigation in agriculture, also can be widely used in vegetables, flowers, orchards, medicinal plants planting places.
Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life are more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. We use the titanium alloy special steel plate as an enamel steel plate, which is twice as strong as ordinary steel plate, the commonly used steel plate thickness from 3mm to 12mm. The inner and outer sides of the steel plate are sprayed with ground glaze and surface glaze. after heat treatment at 850-940â??, the steel plate surface will form a 0.3mm thick enamel coating, which will not only prevent the corrosion of the steel plate, but also has the function of a strong acid, strong alkali resistance. And the self-locking bolt installation is very easy to install, no need for big installation equipment and/or very skilled labors. Center Enamel Glass-Fused-to-Steel tanks are an excellent option for wastewater treatment. They are widely used as drinking water tanks, industrial wastewater storage tank, anaerobic digester, leachate storage tank, agricultural water Storage tank, fire water tank, dry bulk storage tank, municipal sewage. And till now Center Enamel Glass-Fused-to-Steel tanks are already exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc., and products enjoy worldwide recognition due to superior quality and prompt service.
Equipment Name: Conveying tank Manufacture Code: GB150Specification: ID1200Design pressure: 1.0 MPa Material: Q345R Volume: 1.5 m
Asme air storage tank with u stamp project name: petroequipment name: low pressure air storage tankmanufacture code: asmedesign pressure: 1.1 mpa, design temperature: 110 specification: id1000material: sa-516m gr.485volume: 2ma
Project name: 3000t penicillin Equipment Name: Finished Producted tankManufacture Code: GB150Specification: ID2000Material: 304 z
Project name: penicillin projectequipment name: fermentation tank manufacture code: asmespecification: id 3500*13500mm design pressure: 0.3mpa design temperature: 85 material: q345r volume: 100 m agitator speed: 130r/min
Project name: Water project of Riyadh, Saudi Arabia Equipment Name: Surge TankManufacture Code: PED, PD5500Specification: ID 2600**40mm*30000Medium: Potable waterDesign pressure: 3.6MPa Material: SA516M Gr.485Volume: 150m³Weight: 60 ton
Steel-glass fiber reinforced plastic double layers buried oil tank, 112 m
