The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large.
Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C).
Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large. Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
Supplier: Steel,steel pipe,steel tube,stainless steel,circular steel pipe,hollow section steel tube,pipe fitting,flange,fasteners,steel wire,steel accessories,steel product,magnet, ndfeb magnet,smco magnet,alnico magnet,ferrite magnet,ceramic magnet,flexible magnet,magnetic material,magnet accessories, chemical,organic chemicals,chemical additive
Services: Transportation agent,customs clearance service,
Steel
Indian Granite Steel Grey: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Supplier: Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium
Services: Manufacturer & exporter
We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
