Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. Tobee 100mm vertical submerged chemical pump Specification: Size: 100mm Capacity: 40-289m3/h Head: 5-36m Speed: 500-1200rpm Eff.: 62% Power: Max.75kw Handling solids: 32mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration. Tobee 300mm vertical submerged chemical pump Specification: Size: 300mm Capacity: 288-1267m3/h Head: 6-33m Speed: 350-700rpm Eff.: 50% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry. Tobee 40mm vertical submerged chemical pump specification: Size: 40mm Capacity: 7.2-29m3/h Head: 4-28.5m Speed: 1000-2200rpm Eff.: 40% Power: Max.15kw Handling solids: 12mm Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc
Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. Tobee 65mm vertical submerged chemical pump Specification: Size: 65mm Capacity: 18-113m3/h Head: 5-31.5m Speed: 700-1500rpm Eff.: 60% Power: Max.30kw Handling solids: 15mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 150mm vertical submerged chemical pump are designed for every other tank, pit or hole-in-the-ground slurry handling situation, TP150SV pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres. Tobee 150mm vertical submerged chemical pump specification: Size: 150mm Capacity: 108-576m3/h Head: 8.5-40m Speed: 500-1000rpm Eff.: 52% Power: Max.110kw Handling solids: 45mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump. Tobee 250mm vertical submerged chemical pump specification: Size: 250mm Capacity: 261-1089m3/h Head: 7-33.5m Speed: 400-750rpm Eff.: 60% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths. Tobee 200mm vertical submerged chemical pump Design Features: Less wear, less corrosion Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered. Abrasion resistant Ultrachrome T05 alloy. Abrasion/corrosion-resistant Hyperchrome T49 alloy. Corrosion-resistant stainless steels. Natural and synthetic elastomers. No submerged bearing failures The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure. Heavy duty roller bearings, above mounting plate. No submerged bearings. Labyrinth/flinger bearing protection. Rigid, large diameter shaft. No shaft sealing problems The vertical cantilever design requires no shaft seal. No priming required. The top and bottom inlet design is ideally suited for â??snoreâ?� conditions. Less risk of blocking The screened inlets and large impeller passages reduce the risk of blockages. Zero ancillary water costs The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water. Tobee 200mm vertical submerged chemical pump On-site Applications: Mining Sump drainage Coal prep Mineral processing Mill sumps Tunnel Tailings Chemical slurries Ash handing Paper and Pulp Waste sludge Coarse sand Lime mud Phosphoric acid Sump Dredging Mill grinding Alumina Industry Power Plant Potash Fertilizer Plant Other industries
Tobee 6x4 inch gravel pump diesel are a kind of sepecial pump including Feed pump, Discharge pump and Booster pump for MTBM, TBM, EPB, Slurry Shields, and Segment Shields in Tunnelling project, It is designed for continously handling the most difficult higher abrasive slurries which contain too big solids. TG6x4D tunnel Pumps are widely used for delivering gravels, slurries, sands, bentonite, sandy soil, rock, stone, sludge, mud etc Tobee 6x4 inch gravel pump diesel SPECIFICATIONS: Size: 6" x 4" Capacity: 36-250m3/h Head: 5-52m Speed:600-1400rpm NPSHr: 2-5.5m Handling solids: Max.83mm Concentration: 58% Seal arrangement: Packing seal, Expeller seal, mechanical seal Materials: High chrome alloy, Cast iron, Cast steel, Stainless steel etc
Tobee 8x6 inch gravel pump diesel is a kind of cantilevered single-casing centrifugal pump. Pump body is installed with junction plate and cover plate by clamp, which makes the disassembly convenient and quick. The can be equipped with diesel engines or electric motors driven directly, 8x6 Sand Gravel Pump has the advantages of working stability, little vibration, low hydraulic loss, high efficiency, light weight, simple structure and easy maintenance, It is mainly used for dredging river, pipe-jacking system, sucking gravels, blast slag transporting, ore mining etc
Tobee 10x8 inch gravel pump diesel has rational structure, high efficiency, reliable operation, convenient maintenance and other advantages, It is widely used for conveying abrasive or corrosive slurry, especially for dredging, mining, metallurgy, coal, electric power, building materials, chemical industry and other industrial sectors.
Tobee 12x10 inch gravel pump diesel is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is worlds standard for dredge, gravel or large particle slurries applications.
Tobee 16x14 inch gravel pump diesel is horizontal single-casing high head sand pump with wide passage to transfer sand or slurry with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It is widely used for high head and long distance delivering in dredging, sand mining, barge loading and mineral processing etc.
Tobee 18x16 inch gravel pump diesel is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life, It is mainly suitable for delivering slurry, sand, gravel, sludge, mud, blast slag and other abrasive medium. Especially suitable for the high flow, high concentration and high head working conditions.
Tobee 14x12 inch gravel pump diesel is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids
Tobee 8/8 inch gravel pump is a kind of cantilevered single-casing centrifugal pump. Pump body is installed with junction plate and cover plate by clamp, which makes the disassembly convenient and quick. The can be equipped with diesel engines or electric motors driven directly, 8x6 Sand Gravel Pump has the advantages of working stability, little vibration, low hydraulic loss, high efficiency, light weight, simple structure and easy maintenance, It is mainly used for dredging river, pipe-jacking system, sucking gravels, blast slag transporting, ore mining etc.
The features of this CBG-F3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps. This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: Wheat harvester, Corn harvester, etc. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
The TP1-13BSS-40-L series gear pumps have the advantages of its compact structure, high strength body and its axial clearance automatic compensation. This series pumps are mainly installed with the engines power take-off, and they are widely used in the agricultural and construction machinery.
The features of this CBG-F3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps. This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: Wheat harvester, Corn harvester, etc.
GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
Cbt-e3eries gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and agricultural & tractors and engineering trucks. Cbt-e3eries gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as cbt-e3******--side-in and rear-out, rear-in and side-out. Cbt-e3 pumps can also be combined as a relief pump cbt-e3***yl***with safety valve, or as a constant flow pump cbt-e3***hl***with constant flow valve.
