Tobee 150Mm Vertical Submerged Chemical Pump

Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. Tobee 100mm vertical submerged chemical pump Specification: Size: 100mm Capacity: 40-289m3/h Head: 5-36m Speed: 500-1200rpm Eff.: 62% Power: Max.75kw Handling solids: 32mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration. Tobee 300mm vertical submerged chemical pump Specification: Size: 300mm Capacity: 288-1267m3/h Head: 6-33m Speed: 350-700rpm Eff.: 50% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. Tobee 65mm vertical submerged chemical pump Specification: Size: 65mm Capacity: 18-113m3/h Head: 5-31.5m Speed: 700-1500rpm Eff.: 60% Power: Max.30kw Handling solids: 15mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump. Tobee 250mm vertical submerged chemical pump specification: Size: 250mm Capacity: 261-1089m3/h Head: 7-33.5m Speed: 400-750rpm Eff.: 60% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths. Tobee 200mm vertical submerged chemical pump Design Features: Less wear, less corrosion Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered. Abrasion resistant Ultrachrome T05 alloy. Abrasion/corrosion-resistant Hyperchrome T49 alloy. Corrosion-resistant stainless steels. Natural and synthetic elastomers. No submerged bearing failures The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure. Heavy duty roller bearings, above mounting plate. No submerged bearings. Labyrinth/flinger bearing protection. Rigid, large diameter shaft. No shaft sealing problems The vertical cantilever design requires no shaft seal. No priming required. The top and bottom inlet design is ideally suited for â??snoreâ?� conditions. Less risk of blocking The screened inlets and large impeller passages reduce the risk of blockages. Zero ancillary water costs The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water. Tobee 200mm vertical submerged chemical pump On-site Applications: Mining Sump drainage Coal prep Mineral processing Mill sumps Tunnel Tailings Chemical slurries Ash handing Paper and Pulp Waste sludge Coarse sand Lime mud Phosphoric acid Sump Dredging Mill grinding Alumina Industry Power Plant Potash Fertilizer Plant Other industries

Supplier: Steel alloys, non ferrous metals, chemicals, machinery, power plants, universal joint shafts, gear spindle couplings, textile packaging machines
Services: Liaison representatives & service providers
Buyer: Steel alloys, non ferrous metals, industrial chemicals and machinery

Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes

Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry. Tobee 40mm vertical submerged chemical pump specification: Size: 40mm Capacity: 7.2-29m3/h Head: 4-28.5m Speed: 1000-2200rpm Eff.: 40% Power: Max.15kw Handling solids: 12mm Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc

Supplier: Submersible pump, motor, pipe, cable