Working power-----three phare ac 380v 50-60hz Welding mains-----dc 290-330v Rated power-------8kva Max power ------12kva Welding electricity-----1000-2000a(secondary side). Total weight is about 1600kg
Hbly rebar coupler Specification: -material: 45constructional carbon steel -color: white -package:carton and wooden pallet -with high tensile strength and good quality. Technical date: .The material of the splicing coupler is carbon constructional quality steel of no.45. .The coupler can link the rebar which diameter from 16mm to 40mm .The tensile strength of the coupler can be more than 570 mpa .This kind of connection is more rapid and simple convenient The characteristics of the usage 1.Standard model65306; Used in the occasion for connecting the steel bar in normal situation 2.Different diameter model65306; Used for connecting the steel bar in different diameter 3.Flared model65306; Sed for the steel bar which was hard to match 4.Positive and negative screw thread model65306; Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. 5.Locking nut model： Used when the steel bar can nut be turned, then it truns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut. Standard export carton ad pallet
Inside height:85(mm) Inside width100(mm) Total height97(mm) Total width130(mm) Length (mm):1000 Load class:C250
The effect of air flow and vibration friction on the material is utilized in the machine. Heavy impurities such as stone, etc. in the grain are removed through adjusting the amplitude and inclination angle. It has the characteristics of easy movement, adjustable vibration amplitude.
Batch Type EPS Pre-expander PRODUCT DESCRIPTION Batch type EPS Pre-expander Features: 1.Resin Hopper Capacity for different capacities 2.Fluid Bed Dryer with heater 3.Transfer blower for bead 4.Resin filling blower 5.Pefect sealing and chamber pressure stabilizing ,highly efficient heat transition, energy saving up to 50% comparing to continual type EPS pre-expander. standard export packaging
EPS Recycling System PRODUCT DESCRIPTION EPS (Expanded Polystyrene ) recycling machine In the EPS production, sometimes we¡¡¡ê¡èll leave some wasted EPS. By EPS recycling system, the recycled EPS, material can be reused in shape moulding production in a ratio of at least 10-20 percent without any perceptibly optical or physical change of the product quality. For block moulding 20-50 percent or more can be added. If the production capacity is not very big, we can use mini EPS recycling system as solution. In the recycling process, we usually use EPS mixer, EPS de-duster and EPS crusher. standard export packaging
Polymer concrete channel.
Gypsum board plant, gypsum ceiling board plant, gypsum powder plant, nail making machine, coil nail making machine, coating machine.
Aluminium formwork, full steel formwork, euro formwork, and formwork accessories.
Rebar coupler, rebar processing machine.
Concrete batching plant, ready mix concrete plant, concrete mixing plant, concrete mixing building.
Multi deck vibrating stack sizer, vibrating screen, polyurethane fine screen,.
Construction machinery.
Our products are widely used in various fields: industrial factory, civilian building, warehouse, easy steel building, manufacturing, construction and have features such as nice appearance and durable. The colored steel tiles produced by this machine look beautiful ,elegant and noble.They are widely used as the roof of garden,factory,hotel,exhibition center and villa,etc.
Gypsum block production line of high quality, best price.
Capacity: 30,000 ton/year~240,000 ton/year Automation: fully automatic Calcination system: using boiling furnace to calcine, adopting heat conductive oil furnace as heat source Fuel: coal, natural gas, heavy oil, diesel oil. Packaging Details: wooden case packing /20 'container / 40 'container.
The parameters of the gypsum board production line are as follows: 1) Production capacity: 2 million ~20 million square meter per year. 2) Final product variety: common paper-covered, plasterboard fire resistance, paper-covered plasterboard, water resistance paper-covered plasterboard. 3) Product specification: thickness from 7mm ~ 15mm, length from 2400mm ~ 3000mm, width from 1200mm ~1220mm 4) Product quality: in conformity with standard of P.R.C gb/t9775-2008 paper-covered plasterboard. Wooden case packing /20 'container / 40 'container.
gypsum powder machine The big sized gypsum stones are crushed into granules which are less than 25mm by the crusher. After storing and conveying, they will be conveyed into mill for grinding.Then they will be classified through a analytical engine. The qualified powder will be conveyed to the calciner for calcination, while the unqualified one will return to the mill for further grinding until it is qualified. The calcined gypsum powder (it¡¯s usually called Plaster of Paris) will be stored in the finished product silo for the preparation of plasterboard raw material or directly packing and transport to the customer;s site. There are two types of the gypsum powder productionline. One uses the direct burning calciner (it is usually used in the small capacity line, such as 20000 or 30000 tons per year), the other uses the fluidized bed furnace (it fits for all the capacity of the gypsum powder line. This style is very popular in the gypsum powder industry.). Use 40 feet container to transport.
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift. 40 feet container for transportation.
1. PVC film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. 2. aluminum film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. It uses 40 feet containers to transport.
