Hbly rebar coupler
Specification:
-material: 45constructional carbon steel
-color: white
-package:carton and wooden pallet
-with high tensile strength and good quality.
Technical date:
.The material of the splicing coupler is carbon constructional quality steel of no.45.
.The coupler can link the rebar which diameter from 16mm to 40mm
.The tensile strength of the coupler can be more than 570 mpa
.This kind of connection is more rapid and simple convenient
The characteristics of the usage
1.Standard model65306;
Used in the occasion for connecting the steel bar in normal situation
2.Different diameter model65306;
Used for connecting the steel bar in different diameter
3.Flared model65306;
Sed for the steel bar which was hard to match
4.Positive and negative screw thread model65306;
Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
5.Locking nut model：
Used when the steel bar can nut be turned, then it truns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Standard export carton ad pallet
Product : Long Radius Bend Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 23 reviews price : Start from 10 USD RFP India is a well-known exporter, manufacturer and supplier of Long Radius Bends Butt Weld Pipe Fittings worldwide in the steel market industry. The purpose of Radius Pipe Bends is to amend the direction and flow through 180 degree angle. Coming in two important forms of Bends short radius bend and long radius bend to which both of them are having a midpoint-to- midpoint length, along with double the indistinguishable 90 degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. Long Radius Pipe Bends Butt Weld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. They are quite unproblematic to remove and install, and can be accessible to our customers in diverse technical specifications of sizes and threading as per necessity. Standard : ANSI/ASME, MSS, JIS, DIN, BS etc TYPE : SEAMLESS / WELDED/ FABRICATED RANGE : 2"NB TO 18"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 FORM : Long Radius Bend, Industrial Long Radius Bend, Piggable Bend, Induction Bend Radius( R ) : 3D, 5D, 6D, 8D, 10D & 20D. Stainless Steel Long Radius Bends : Standard : ASTM / ASME A/SA 403 GR WP "S" "W" " WX" Grade : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Long Radius Bends : Standard : ASTM / ASME SA 815 Grade : UNS NO.S 31803, S 32205 Aluminium Long Radius Bends : Standard : ASTM / ASME SB241 Grade : 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
Construction Equipments
Supplier: High tensile fasteners hex bolts, hex nuts, coupling nuts Tractor parts - tensioner rods, top link pins, coupling turnbuckles hub bolts, round threaded bushes Reinforcement products - high torque rock bolt nut, rockbolting couplers rebar couplers, heavy fasteners construction equipment
Supplier: Rebar splicing couplers, threading machines, drilling equipment
Buyer: Threading machines
Supplier: Rebar couplers, forged rebar couplers, parallel threaded couplers, threaded couplers
Threaded fittings are piping components that join two pipes or other components together using threaded connections. They are made from a variety of materials, including steel, stainless steel, brass, and plastic. The most common types of threaded fittings are: Elbows: These fittings are used to change the direction of a pipe. Tees: These fittings are used to create a branch in a pipe. Couplings: These fittings are used to connect two pipes of the same size. Unions: These fittings are used to disconnect two pipes for maintenance or repair. Caps: These fittings are used to close off the end of a pipe. Plugs: These fittings are used to block a hole in a pipe. Bushings: These fittings are used to reduce the size of a pipe. Threaded fittings are specified by their size, material, and type. The size of a threaded fitting is the nominal diameter of the pipe it is designed to connect. The material of a threaded fitting is the type of metal or plastic it is made from. The type of a threaded fitting is the specific design of the fitting, such as an elbow, tee, or coupling. The technical specifications of threaded fittings include the following: Pressure rating: This is the maximum pressure that the fitting can withstand. Temperature rating: This is the maximum temperature that the fitting can withstand. Thread type: This is the type of thread used on the fitting. The most common thread types are NPT (National Pipe Thread) and PT (Pipe Thread). Finish: This is the surface finish of the fitting. The most common finishes are smooth and threaded. Coating: This is a protective coating applied to the fitting. The most common coatings are zinc and epoxy.
Product Description A 90 degree elbow is a pipe fitting that is used to change the direction of a pipe by 90 degrees. It is a common fitting that is used in a variety of applications, including plumbing, HVAC, and industrial piping. Technical Specifications The technical specifications of a 90 degree elbow vary depending on the material, size, and type of fitting. However, some of the common specifications include: Material: Steel, brass, copper, plastic, etc. Size: 1/2 inch to 12 inches (nominal pipe size) Type: Butt-weld, threaded, socket-weld, flanged, etc. Radius: Short radius (SR) or long radius (LR) Wall thickness: Schedule 40, Schedule 80, etc. Applications 90 degree elbows are used in a variety of applications, including: Plumbing: Changing the direction of a water pipe HVAC: Changing the direction of an air duct Industrial piping: Changing the direction of a fluid line Machinery: Connecting pipes to valves and other components Construction: Connecting pipes to sprinkler systems and other fixtures Benefits The use of 90 degree elbows in piping systems offers a number of benefits, including: Increased flexibility: Elbows allow pipes to be routed around obstacles and through tight spaces. Reduced stress: Elbows help to reduce stress on pipes by distributing the load more evenly. Improved flow: Elbows can help to improve the flow of fluids by reducing turbulence. Increased safety: Elbows can help to prevent leaks and spills by providing a smooth transition between pipes.
Product Description A 45 degree elbow is a pipe fitting that is used to change the direction of a pipe by 45 degrees. It is typically made of steel, stainless steel, or plastic, and can be threaded, welded, or socket-welded to the ends of the pipes. 45 degree elbows are commonly used in plumbing, HVAC, and other piping applications. Technical Specifications The technical specifications of a 45 degree elbow will vary depending on the material, size, and type of fitting. However, some common specifications include: Inside diameter (ID): The ID is the diameter of the pipe that the elbow will fit. Outside diameter (OD): The OD is the outer diameter of the elbow. Radius: The radius is the distance from the center of the elbow to the inside of the bend. Wall thickness: The wall thickness is the thickness of the elbow. Type: There are two main types of 45 degree elbows: long radius (LR) and short radius (SR). LR elbows have a longer radius than SR elbows, which makes them more flexible and easier to install. Material: The most common materials for 45 degree elbows are steel, stainless steel, and plastic. Steel elbows are the most durable, but they are also the heaviest. Stainless steel elbows are corrosion-resistant, but they are more expensive than steel elbows. Plastic elbows are the lightest and least expensive, but they are not as durable as steel or stainless steel elbows. Applications 45 degree elbows are used in a variety of applications, including: Plumbing: 45 degree elbows are used in plumbing systems to change the direction of pipes. They are commonly used in bathtubs, showers, toilets, and sinks. HVAC: 45 degree elbows are used in HVAC systems to change the direction of air ducts. They are commonly used in furnaces, air conditioners, and heat pumps. Process piping: 45 degree elbows are used in process piping systems to change the direction of fluids. They are commonly used in chemical plants, oil refineries, and power plants. Other applications: 45 degree elbows can also be used in other applications, such as irrigation systems, fire sprinkler systems, and swimming pool systems.
Supplier: Quick coupler, hose fitting, quick connect coupling, pipe fitting, air hose, thread plug, connector
