hose clamp Material : W1,W2,W4,W5 Band width : 9mm,12mm Band thickness : 0.6mm Size :6-160mm
Worm drive hose clamp Material : W1,W2,W4,W5 Screw cross head or slotted head Band width : 8/12.7/14.2mm BAND WIDTH SIZE /MM PCS/CTN CARTON SIZE 8mm 6-16 2000 380 270 15 8mm 9-22 2000 380 270 21 12.7mm 11-25 1000 380 270 210 12.7mm 13-27 1000 380*270*210 12.7mm 14-32 1000 4 12.7mm 17-38 1000 440 12.7mm 19-44 1000 450 12.7mm 27-51 500 30012.7mm 33-57 500 330 12.7mm 40-63 500 330 12.7mm 46-70 500 360 12.7mm 52-76 500 370 12.7mm 59-82 500 410 12.7mm 65-89 500 410 12.7mm 71-95 500 410
C Clamp Item No.: M00325 Specification: 4" More information can view Auto Tools Depot.
C Clamp Item No.: M00325 Specification: 4" More information can view Auto Tools Depot.
Item No.: M00302 Specification: 3" 4" 6" 9" More information can view Auto Tools Depot.
---Strip Materail and Fixed parts: S.S 1.4301/1.4571/1.4510 as per EN10088(AISI304/AISI316/AISI439) ----Bolt: Round head screws with hexagon socket with zinc plated Sealing rubber/Gasket:EPDM/NBR/SBR
---- Strip Materail and Fixed parts: S.S 1.4301/1.4571/1.4510 as per EN10088(AISI304/AISI316/AISI439) ----Bolt: Round head screws with hexagon socket with zinc plated Sealing rubber/Gasket:EPDM/NBR/SBR
ADSS Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Characteristics of downlead clamp Adaptable to a wide range of conductors Adequate protection for optical fibers. Bundle Adapter Availability High torque accuracy due to the removable bolts of the lattice adapter. Guide pins reduce installation problems and optical grounds are protected by aligning them on the clamp during fastening. A device that inhibits rotation of the lattice tower clamp. This supports single mounting and clamp locking to the tower. Three part numbering is sufficient to support 25" to 1.00" fiber optic cables. Bundle adapter ensures no holes are drilled in the pole The Mesh Tower Adapter has one part that covers the entire thickness of the tower steel. High resistance due to weatherproof polyurethane, but even flexible enough to support and protect ADSS or OPGW cables. Huaneng leadwire clips provide excellent durability and reliable performance in a variety of transmission line and communication applications. Our leadwire clips feature a range of plate cables, fast installation, smooth surfaces and competitive pricing. Huaneng is an ISO certified downlead clamp manufacturer, supplier and exporter based in China. If you would like to see more information about the specifications, please refer to the specifications tab below. Please feel free to contact us.
Helical Suspension Clamp Helical suspension clamps are mainly used to support ADSS fiber optic cable suspension wire clamps, applicable to ADSS fiber optic cables, conductors and ground lines in transmission lines, it is recommended to be used in the line with a turning angle of less than 30 degrees. Spiral pendant clamp is the ADSS fiber optic cable suspended in the transmission line tower connection fixtures, the line clamp can reduce the static stress of the cable in the suspension point, improve vibration resistance, inhibit the dynamic stress caused by wind vibration, to ensure that the cable does not exceed the permissible value of the bending of the fiber optic cable, the cable does not produce bending stress. Installation of the cable clamp can avoid all kinds of harmful stress concentration in the cable, so that the optical fiber inside the cable does not occur additional damage loss. Features ADSS cable clamps are made of aluminum alloy and aluminum clad steel spiral rod, aluminum shell and other connectors. ADSS cable clamps are mainly used for linear tower cable suspension and support, play a transfer of axial load and dispersion of axial pressure, the cable to play a good role in protecting, but also to prevent the ADSS cable due to the bending radius is too small or stress concentration and accidents. ADSS with a spiral overhanging wire clip according to the ADSS pitch length is different, divided into short pitch overhanging wire clip, single overhanging wire clip, double single point overhanging wire clip (referred to as a single overhanging wire clip), double point overhanging wire clip (referred to as a double overhanging wire clip) and so on several kinds. APPLICATIONS Substation Installation- Prefabricated tension clamps are used in substation installations to support and tension wires connecting different components of the grid. They also maintain proper tension on cables or busbars. Communication Lines- Clamps are also used in installations such as fiber optic cables or telephone lines. They help hold and tension communication cables to ensure reliable transmission of signals over long distances. Distribution Lines- Conductor clamps deliver power to residential, commercial and industrial areas to secure and support conductors. This provides the necessary tension for efficient power distribution.
Power Line Suspension Clamp Power line suspension clamp protect conductors and other equipment from airborne vibrations and oscillations caused by strong winds and storms. The suspension clamps are made of galvanized steel and aluminum alloys that help resist corrosion caused by varying weather conditions in the environment. The resistance provided helps increase the durability of overhead line suspension clamps, which in turn helps reduce repair and maintenance costs. They are used along with other equipment such as bolts, nuts and washers to help secure connections on overhead lines. This helps to limit loose connections that can lead to electrocution. These devices should be made from materials similar to the conductor as they are installed near the conductor to help minimize wear and tear and friction between different devices. Suspension Clamp Component Parts The Suspension Clamp is not a single entity as it has a number of major components that make up the connection to the conductor. They are described below. Main Body- This is the frame that supports the conductor ADSS Suspension Clamp and is made of aluminum alloy which is strong and corrosion resistant. This helps in maintaining the durability of the OPGW overhanging wire clamps. Retainer- The purpose of this component is to connect the conductor of the transmission line to the body of the spiral suspension clamp. Tape - This is a rope-like structure that is responsible for transferring the load from the swing axis directly to the insulator string. Straps are well suited for this role because they are made of galvanized material, which helps them achieve their purpose. Washers - Usually used when the clamping surface is not vertical. This helps provide support for the aluminum suspension clamps and conductors. They are made of steel which helps in resisting corrosion and rust. Bolts and Nuts- Bolts and nuts are used to secure connections when using fiber optic suspension clips mechanically. They are also made of steel to provide strength and corrosion resistance. Threaded Inserts- These are the fastening elements of suspension clips that are injected into components with threaded holes to complete the connection. Threaded inserts are also made of stainless steel to resist corrosion and rust.
Design Requirements for Suspension Clamps It ensures that there is proper coordination between the physical and mechanical aspects of the suspension clamp. In addition, the design requirements ensure that all components are in the correct position. This will contribute to the smooth operation of the suspension. -Anchor Clamps First of all, you should be able to move the anchor clip next to the conductor freely. To accomplish this, make sure that the trunnion of the clamp is part of the body. -Conductor Support Slot When purchasing a suspension clamp, make sure that the conductor support slots are the correct size. Check the measurements according to the suspension clamp manufacturer's instructions. The body and keeper should be free from sharp edges or irregularities of any kind. - Design of Shoulder Straps When purchasing overhead suspension clips, check the design of the straps. Make sure that they are round and that their dimensions directly match those of the trunnions. -Design of bolts and nuts Although they may look small, they have strict design requirements. When purchasing suspension clamps or overhead cable clamps, check the position of the bolts and nuts. Make sure they are securely fastened to the clamp. They should be securely attached to prevent them from falling out during fixture operation. Design them to ensure that the robot can protrude through the threads to the outside. In addition to providing outstanding products and services, we are also passionate about educating customers on the proper application of Conductor Suspension Clamp,ADSS Cable Suspension Clamp,Overhead Line Suspension Clamp.Welcome to visit our company and factory. If you need any further assistance, please do not hesitate to contact us. The product will supply to all over the world, such as Kenya ,Palau ,Uzbekistan ,Iraq ,India . There are more than 100 jobs in our factory, and we also have a working team of 15 people to provide pre-sale and after-sale services to our customers. Welcome customers all over the world to contact us or visit our company. Thanks for the regular and new customers support. We look forward to serving you.
ADSS Cable Suspension Clamp ADSS Suspension Clamps, also known as Prefabricated Suspension Clamps or AGS Suspension Clamps, offer a full range of aluminum cladding, rubber, armored clamps, bolts, and nuts to support and protect ADSS/OPGW cables from bending damage. Armored Clamp Suspensions can be customized for different gauges, various cable sizes, wire raw materials, and armored clamp suspension design options to precisely match the clamping strength, span, and cable type requirements, including Dual Suspension Clamps, AGS Suspension Clamps, Cushion Clamp Suspension Clamps, ADSS Cable Suspension Clamps, and OPGW Suspension Clamps. adss Suspension Clamps are specifically designed for use in applications where there is a large drop in long spans, river crossings, or on hills. The double suspension clips have a vertical breaking load of 100kn. as your OEM partner for prefabricated suspension clips, we can help you save money and stay competitive. Whether it is standard, customized or different types, Huaneng Clamp Suspension offers quality solutions for all market needs.
OEM ADSS Tension Clamp Pre-twisted tension clamps are also known as pre-twisted dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. Pre-twisted dead end is a tension clamp that plays an important role in ADSS/OPGW transmission lines. Dead-end fiber optic cable clamps are used to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique design of the pre-fabricated tension clamps not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance in protecting ADSS/OPGW/OPPC cables from stress point damage and preventing signal degradation during transmission. Pre-twisted tension clamps and pulling dead-end cable clamps used on conductors and ground wires are similar in appearance, but the specifications, raw materials, and strength requirements of the two types of pulling dead-end cable clamps are quite different. Although there are different design standards in different countries, we can make OEM according to customers' requirements.
Custom ADSS Tension Clamp ADSS Tension Clamps are used to connect ADSS cables to poles/towers. Armored rods provide protection and cushioning for the ADSS cables. The special design of the prefabricated rods ensures that the tension clamps do not overstress the ADSS cables, thus ensuring a normal service life of the cable system.The ADSS tension clamps are made of aluminium-clad or galvanized steel wire. Structure and raw materials Unshackle - hot-dip galvanized steel. The shackle is connected to the reinforcing bar unit. Twisted chain ring - hot dipped galvanized steel. Twisted links are used to connect the shackle to the thimble. Sleeve - hot dip galvanized cast steel. The sleeve is inserted into the unclamp of the tension clamp to provide protection and connection. Armored rod ----- Aluminum clad steel wire. Armored rods increase friction through a layer of granular emery inside the cable. The rods are shop assembled into four subsets to minimize misalignment errors and speed installation. The ends are bent outward to provide strain relief in critical cable departure areas. Prefabricated Dead Ends - Prefabricated dead ends are made from hot-dip galvanized steel wire or aluminum-clad steel wire and are assembled in the shop into a subset with a solid layer of emery to increase the grip of the tensioning clamps while reducing lateral pressure. Direction 1. Used for connecting connecting poles (towers) to terminal poles (towers), tension poles, or poles (towers) with line clamping angles of 25�° or more. Special specifications: 1 unit for each terminal pole (tower), 2 units for each tension pole (tower), and 2 units for each connecting pole (tower). You can select the specification model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or span length from the data sheet.
ADSS Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. The downlead clamp consist of a stainless steel band and a rubber part. The stainless steel band is used to fix the rubber clip on the pole. At the same time, the rubber part fixes the optical fiber. This way, the fiber does not shake and at the same time reduces damage caused by friction. The lead wire clamps for towers have a different structure than the lead wire clamps for poles. The clamps consist of steel brackets, bolts and nuts, and rubber parts. The bolt secures the lead clip to the tower. Compared to other lead clip manufacturers, Huaneng offers the end user a wide range of lead clip design options. huaneng lead clips can be custom manufactured with a wide range of cables, materials and different connection options.
OPGW the Preformed Helical Tension Clamp The OPGW Premored/Helical Tension Clamp is primarily used to install cables with RTS less than 160 kN to tension towers/poles, corner towers/poles and terminal towers/poles. A complete set of OPGW prefabricated/spiral tensioners includes aluminum alloy or aluminum clad steel dead ends, structural reinforcement rods, support fittings and grounding clamps, etc. Wire Tension Clamp An OPGW (Optical Ground Wire) wire tension clamp is a specialized device used in the installation and maintenance of OPGW cables. OPGW cables are composite overhead cables that combine optical fibers for communication purposes with a metallic ground wire for power transmission and grounding. The OPGW wire tension clamp serves the purpose of securely attaching the OPGW cable to the supporting structure, such as poles or towers, while maintaining the necessary tension. It plays a crucial role in ensuring the stability and reliable performance of the OPGW system.
OPGW Performed Helical Suspension Clamp The unique design of the lightweight HuaNeng Fitting mechanical suspension supports spans of optical ground wire (OPGW) cables through a wide range of line angle variations. HuaNeng Fitting's mechanical suspension is easy to install while supporting vertical, lateral, and longitudinal unbalanced loads and angular tension without damaging cable strands or affecting fiber performance. Separate bolts OPGW Suspension Clamp Suspension clamps are also known as overhanging wire clamps or overhanging fixtures. According to the use, opgw suspension clamp include ABC cable overhanging wire clamps, ADSS cable overhanging wire clamps, and overhead line overhanging wire clamps. Suspension wire clamp is a general term for all types of wire clamps that suspend wires or cables from a pole tower. Pre-twisted opgw cable clamps are used for the connection of OPGW cables and towers to reduce the static stress at the support point of OPGW cables, to improve the vibration resistance of ADSS cables, to buffer the dynamic stress of wind vibration, and to ensure that the cable bends within the permissible value, so that the cable does not produce bending stress, so that the optical fiber does not produce additional loss in the cable after installation.
OPGW Preformed Double Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. Preformed Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique pre-formed tension clamp design not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance to protect ADSS/OPGW/OPPC cables from stress point damage and prevent signal degradation during transmission. Pre-formed tension clamps for conductors and grounds are similar in appearance to pulling dead-end clamps, but the specifications, raw materials and strength requirements of the two types of pulling clamps do differ significantly. Although there are different design standards in different countries, we can OEM to customer requirements. As an experienced manufacturer and supplier of preformed tension clamps, Seinei understands the standards, the manufacturing process and understands your needs. If you have any questions, please feel free to contact us.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
ADSS with The DN Short-span Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters. Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc. Purposes: support all strain, make ADSS cable connect the strain pole and tower. Features: Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line. Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life. Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity. Gripping mechanism that securely holds the cable without causing damage. Tensioning mechanism that allows for adjustment of the cable tension. Insulating material to protect the cable from electrical currents. Suitable for use with a range of cable diameters. Easy installation and maintenance. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods
