1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
1.Solvent free two component material 2.Transparent both before and after cured 3.Platinum catalyzed curing system 4.No by-products after curing 5.Low viscosity before cured, easy to application 6.Excellent flexibility, free from stress 7.Extremely low oil exudation, good anti-poisoning 8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion 9.It can stick repeatable 10.It can use with polyethylene release liner 11.Pass test of physiological compatibility, poison cell, skin stimulus etc. PROPERTY STANDARD/UNITS VALUE of SI2721 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Transparent Liquid Transparent Liquid Viscosity 7;C, cps 61;¨¤150161;¨¤150 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100: (80~120) Viscosity of mixture 7;C, cps 800¨¤150 Operation time 7;C, min ¡ê¾60 Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min Cured appearance ---- Transparent gel Application temperature §C -60~200 Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum. Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
5N-6N
Silica fume Analysisresult 900 (%)920 (%)940 (%)970 (%) Sio289.0292.0994.896.77 K2o1.321.120.630.26 Na2o0.520.420.350.29 Ph value8.187.786.607.10 Loi 750f¦1.801.600.900.80 Moisture content (when bagged) 0.41 0.400.430.41 Coarse particles:·+45 micron 64.732.6 Specific surface area (b.E.T.)1 8 m2/g19 m2/g19 m2/g19 m2/g Bulk density(kg/m3) 200~350 (900u)200~350 (920u)200~350 (940u) 500~600 (900d)500~600 (920d)200~350 (940u) 800kg/jumbo bag, 20'fcl contains 16 tons.
Silicon.
Key Features 1.Excellent chemical resistance, low odor, good adhesion 2.Low volatile does not exceed 300ppm, closed environment without corrosion, non-fogging 3. Moisture, dirt and other atmospheric composition proof 4.Relieving the mechanical stress and tension that cased by machinery, heat shock and vibrate 5.Excellent outdoor aging-resistance for 20-30 years 6.Stable mechanical and electrical properties between -60-260;C Typical Applications For household appliance, engineering machinery, PV modules, automotive lamps, LED lamps, PCB components fixing bonding and sealing. Technical Data Table PROPERTY STANDARD/UNITS VALUE Before curing SI1336TW/TB SI1336T Color Visual inspection White/Black Transparent Viscosity 25;C, mP6;s paste paste Density 25;C, g/cm3 161;¨¤0.03161;¨¤0.03 Tack free time 25;C, 55%RH, min 61;¨¤5 After cured Room temperature cured Hardness Shore A 35¡Â¨Â¤#161;¨¤5 Thermal conductivity W/m.K 0.35 0.27 Elongation at break % 320 230 Tensile strength MPa 2.3 1.8 Shear strength MPa, iron/iron 1.8 1.3 Dielectric strength kV/mm, 25;C 22 18 Loss factor 1 MHz, 25;C 0.09 Dielectric constant 1 MHz, 25;C 2.9 Volume resistance (DC500V6; cm 611014 SI1336, 310ml/tube, 25 tubes/carton; 100ml/tube, 100 tubes/carton
Product Properties Density: 0.96±0.03 g/ml Colorï¼?Clear, Whiteï¼?black Sag degree upright and parallel: No sag when applying Surface forming timeï¼?â?¤15min Tensile strengthï¼? â?¥0.6mpa Elongation at breakï¼?â?¥350% Application Rate: â?¥80ml/min Shore A Hardness: 13~23 Temperature resistance: -20-90 Packingï¼? 300ml ï¼?280ml ï¼?24pcs/carton
RTV Silicone Electric Conductive low modulus silicone sealant CAS No.:67763-03-5 Other Names:adhesive MF: mSiO2nH2O EINECS No.: 210-898-8 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,cables,automotive,LED,Aerospace,etc Brand Name: SEPNA Model Number:SI1336 Color:transparent/white/black Shelf life:12 months Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach Density:1.02-1.25(g/cm3) Using temperature:-60 ~ +200? Curing speed min:5-10 Tensile strengh Mpa:=2~2.5 Hardness:3 ± 3//30 ± 5 Elongation at break:=300 Packaging Details:100ml /tube 100pcs/ctn 310ml/tube/25tube /ctn black/white/transparent Delivery Detail:7-20 days
Waterproof Thermally Conductive price liquid epoxy resin adhesive Quick Details CAS No.:24969-06-0 Other Names:epoxy sealant MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Double Components Adhesives Main Raw Material:Epoxy Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SE2202 Type:Two Component Name:liquid epoxy resin adhesive Mixture ratio: A:B=100:20 Viscosity of mixture:900~1300 Preliminary Cured:4~6 25°C, hours Cure condition:25°C/ 24 hour; 80°C/ 2~3 hour Hardness:>85 Shore D Thermal conductivity: 0.35 W/mK ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples Packaging & Delivery Packaging Details:Package for Thermally Conductive liquid epoxy resin adhesive Black/White color Part A-25 KG/Bucket, Part B-5 KG/ Pot Delivery Detail:10 days
CAS No.:67763-03-05 Other Names:silicone sealant MF: mSiO2 nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics, LED lamp, photovoltaic devices ,PCB Brand Name: SEPNA Model Number: SI1102 Type:Liquid Glue Name:silicone sealant Color:Transparent/ Black/ Gray Viscosity:7,000/ 12,000/ 12,000 Curing speed:3-5mm/24hours Certificate:SGS,ISO9001-2008,MSDS,ROHS ODM/OEM:Accepted Package:310ml/tube, 25 tubes/carton Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples:Free samples
Yj 66 structural silicone sealant Performance of structural silicone sealant High mechanical performances with joint movement capability of +(-)25%. Neutral cured, no corrosion, non poisonous Package of structural silicone sealant A component 200l iron drum B component 20l plastic drum Or a component 20l plastic drum B component 310ml plastic tube Storage and usable life of structrual silicone sealant Structural silicone sealant is stored on airtight container under 30¡ãc and 12 months of shelf life. Transportation of structural silicone sealant Non-dangerous product, it can be delivered by train, car, boat and air plane. Packge: iron drum a component:200l/irondrum b component:20l/iron drum or a component:20l/plastic drum b component:310ml/plastic drum
Packing: 7kg per paper barrel, diameter being 160mm or 180mm , 4 barrel /carton Suggest: While application together with joinleader other corresponding products, it has already showed perfect function both in testing and practicing. Storage: with a shelf life of 12 months in dry, ventilated and shady places below 32¡ãc Refer to product packaging for "use by" or expiry date. Limitation: Only suitable for those mentioned products above and do test before application Certificate: Msds, iso9001. Performance of butyl sealant Clean and dry adhesion surface to get rid of dirty, oily things. Lfz28 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 120¡ãc~150¡ãc. The environment temperature should not be lower 10¡ãc in application. Package of butyl sealant Lfz28 butyl sealant for insulating glass primary seal, black, 1kg/paper pail, 5kg/pail, 7kg/pail or supply according to customer required. Storage of butyl sealant -10¡ãc~35¡ãc, shelf life of 24 months. 4pcs/carton box
Lfz21 is a kind of two-part polysulphide sealant with high performance widely used for insulating glass, construction, transportation and refrigeration field. Performance polysulphide sealant Lfz21 polysulphide sealant has excellent elasticity, low gas permeability and adherent stability. The property is certificated by gb/t11944-2002, jc/t486 standard. Excellent weatherproof , no corrosion, no poisonous. Package polysulphide sealant Composition a 200l iron drum 330kg/drum ( =571.5mm) Composition b 20l plastic drum 30kg/drum ( =280mm or 285mm) Or composition a 20l plastic drum 33kg/barrel Composition b 3kg/barrel Storage polysulphide sealant Store at the dry and cool area in airtight container. When stored at or below 27¡ãc in the original unopened containers, this products has a shelf life of 9 months from the date of production. Packge: iron drum a component:200l/iron drum 330kg/drum b component:20l/iron drum 30kg/drum or a component:20l/plastic drum 33kg/barrel b component:3kg/barrel
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
(2" 3" 4", 6",8",12") , (N/P), ( , ) One or tow sides polished IC grade silicon wafers. 25pcs/lot.
We can supply (2" 3" 4", 6",8",12") , (N/P), ( , ) one or two sides polished IC silicon dummy(test) wafers. 25pcs/Lot.
We can supply (2" 3" 4", 6") , (N/P), ( , ) IC silicon wafer. 25pcs/lot
Silicon wafers.
