The 10p series single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, s type flow channel, low pressure drop loss, high flow coefficient wide adjustable range, high flow characteristic precision, etc. This kind of control valve is suitable for applications with relatively low differential pressure with tight shut-off. It is suitable for controlling medium flow or pressure. The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditiona l thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti- cavitation functions can be offered according to the requirements in different service conditions. Wooden case
Working voltage:85~265vac, 50/60hz Working environment:temperature:-10~+50ºc Relative humidity:rh
Working voltage: ac22010%, 50/60hz (special-made: 24vac, 110vac) Power consumption: 4w(only when you open and close the valve) Running time of each action: ¡â 18s (valve-on); ¡â 15s(valve-off) Nominal pressure: 1.6mpa Applied medium: cold or hot water, glycol water liquor ( 50%). Medium temperature: 2-75 Working environment temperature: -5+50 Material of actuator: outer cover: pc engineering plastic Base: enhanced pps (fire-resistant) 0.7kgs 15*13.5*8.5 cm 43*32*35 cm 32pcs/ctn
1. Gate Valves 2. Globe Valves 3. Ball Valves 4. Hydraulic Control Valves 5. Butterfly Valves 6. Check Valves 7. Diaphragm Valves,Plug Valves 8. Safety Valves 9. Regulating Valves 10. Steam Trap/Valves 11. Filter Valves 12. Solenoid valve,Hydraulic Valve
Used on all kinds of pipelines of 150LB-2500LB, PN16-PN420, 10K-200K Pressure: 150LB-2500LB, PN16-PN420, 10K-200K Material: cast steel, ss steel, brass etc.
1, Pipe thread in accordance with ANSI B2.1, BS 21 1973 and DIN259/2999, etc; 2, Blow out proof stem/ Full bore; 3, Casting body and cap; 4, 1000 PSI (69 BAR) W.O.G.; 5, Material: AISI-316(DIN 1.4408) (ASTM-A351-CF8M), AISI-304(DIN 1.4301) (ASTM-A351-CF8)6, Lock device, Lug body; 7, Size: 1/4" to 4". Packaging detail: in cartons. Delivery detail: in 15 days.
This kind of valve is suitable for industries of food stuff, pharmacy, petrochemical, electric power, steel, industrial environment protection water treatment and building construction. It is an ideal device for flux adjustment and cut in water supply & drainage pipeline. Standard for design and manufacture Design standard: GB/T 12238 Flange standard: GB/T 9113.1 GB/T 9115.1 GB/T 9115.2 Structure length: GB/T 12221 Pressure test: GB/T 13927, JB/T 9092 Applicable medium: Water, steam, oil, acid corrosive and so on. Applicable temperature: Carbon steel: -29-425 Stainless steel:-40-600 Materials for main parts Body: Cast iron, cast steel, stainless steel, Cr. Mo. Steel, alloy steel Disc: cast steel, stainless steel, Cr. Mo. Steel, alloy steel Seat seal ring : stainless steel, multiple layers, polyester lactone , wear resisting material Stem : 2Cr13.1 Cr13 Stainless steel, Cr. Mo. steel Packing : Flexible graphite. Carton case.
Specifications: 1) Size: 1/2~36" 2) Pressure class: 150 ~2,500lbs 3) Temperature: -29 ~ 800°C 4) Suitable medium: water, oil, vapor 5) Body material: WCB, WC1, WC5, WC6, WC9, C12, CF3, CF8, CF3M, CF8M 6) Operation: manual control, gear operated, motor actuated Design std: API 600/6D Flanged std: ASME B16.5/ASME B16.47A Butt welded std: AEME B16.25 Face to Face std: ASME B16.10 Inspection and testing std : API 598. Carton case.
2/2 way solenoid valve Orifice diameter: 1 to 6mm Zero pressure start Clean air and liquid (no solid impurity) brass or SS304 body Applications: Application of experimental equipment, analytical instruments, to the fluid exchange, pneumatic control, medical equipment, textile printing and dyeing, welding equipment, printing equipment, hydraulic system, environmental protection equipment, petrochemical, electricity, machinery manufacturing, food industry, such as automatic control Technology data: Orifice diameter: 1 to 6mm Principal structure: direct action Body material: brass SS304 Seals: NBR and FKM Ambient temperature: -10 to +60 Fluid temperature: C2: -10 to +80¡ãC C3: -10 to +120¡ãC Fluid: clean air and liquid (no solid impurity) Viscosity: 22mm2/s Connection: internal thread (NPT/G) Install: horizontally and coil up Protection: IP65 Option: Explosion proof: ex-proof level: Exm I / II T4 Explosion proof certificate: GYB071065X Normally open: valve open when deenergized, valve closed when energized Electrical data: Voltage: 220 to 110V AC, 50/60Hz, 24 to 12V DC Power rating:Ordinary-type AC: 10V AC/ DC: 12W Explosion proof AC: 12V AC/ DC: 13W Voltage tolerance: -10 to +10%. Carton (260*180*140).
Specifications: Voltage: AC: 380, 220, 110, 48, 36 and 24V at 50/60Hz DC: 220, 110, 48 and 12V Ambient temperature: -30 to 60C (Ex-proof: -20 to 40C) Fluid temperature: C1: -10 to 60C, NBR, FKM, PTFE C2: -25 to 90C, FKM, PTFE C3: -10 to 120C, FKM, PTFE C33: -10 to 150C, FKM, PTFE C5: -10 to 220C, PTFE C6: -10 to 250C, PTFE, red copper CD1: -40 to 60C, PTFE CD2: -60 to 60C (special) CD3: -120 to 60C (special) Viscosity: 22mm (
2/2 way solenoid valve Orifice diameter: t to 50mm Zero pressure start Clean air, liquid (no solid impurity) Brass ss304 body Application: application of experimental equipment, analytical instruments, to the fluid exchange, pneumatic control, medical equipment, textile printing and dyeing, welding equipment, printing equipment, hydraulic system, environmental protection equipment, petrochemical, electricity, machinery manufacturing, food industry, such as automatic control Technology data: Orifice diameter: 5 to 50mm Principal structure: direct action Body material: brass ss304 Seals: NBR, FKM, EPDM Ambient temperature: -10 to +60 deg. C Fluid temperature: C2: -10 to +80 deg. C; C3: -10 to +120 deg. C Fluid: clean air, liquid (no solid impurity) Viscosity: 22mm2/s. Connection: internal thread.(NPT/G) Install: horizontally, coil up Protection: IP65 Option: Explosion-resistant: ex-resistant level: Ex dII BT4 Explosion-resistant certificate: GYB071066 Normally open: valve open when de-energized, valve closed when energized Electrical data: Voltage: 220/110V AC, 50/60Hz; 24/12V DC Power rating: ordinary-type; AC: 10VA; DC: 12W Explosion-resistant: 17VA AC, DC: 20W Voltage tolerance: -10 to +10% Electrical connect: ordinary-type: standard connect box Ex-resistant type: M14 x 1.5, 1.5m lead. Carton.
2/2 way solenoid valve Orifice diameter: 10 to 50mm Clean air, liquid (no solid impurity) Brass, SS304 Applications: application of experimental equipment, analytical instruments, to the fluid exchange, pneumatic control, medical equipment, textile printing and dyeing, welding equipment, printing equipment, hydraulic system, environmental protection equipment, petrochemical, electricity, machinery manufacturing, food industry, such as automatic control Technology data: Orifice diameter: 10 to 50mm Principal structure: pilot diaphragm Body material: brass SS304 Seals: FKM, NBR, EPDM Ambient temperature: -10 to +60 deg. C Fluid temperature: C2: -10 to +80 deg. C; C3: -10 to +120 deg. C Fluid: clean air, liquid (no solid impurity) Viscosity: 22mm2/s. Connection: internal thread.(NPT/G) Install: horizontally, coil up Protection: IP65 Option: Explosion-resistant: Ex d I/II T4 Explosion-resistant certificate: GYB071065X Normally open: valve open when de-energized, valve closed when energized Electrical data.: Voltage: 220V, 110V AC 50/60Hz; 24/12V DC Power rating: 13W Voltage tolerance: -10 to +10% Electrical connect: Ordinary-type: standard connect box Ex-resistant type: M16 x 1.5, 1.5m lead. Carton.
Power: Ordinary-type: 12W (10V AC) Explosion-proof: 13W (12V AC) Voltage: 220V AC at 50/60Hz or 24V DC Explosion-proof: Level: DII T4/T5 Certification: gyb071065x Voltage tolerance: -10 to +10% Ambient temperature: -10 to +60C Fluid temperature:C2: -10 to +80C Principal structure: direct action and pilot Body materials: SS304 and brass Seals: NBR and FKM Fluid: clean air and liquid (no solid impurity) Viscosity: 2mm2/second Connection: internal thread Install: horizontally and coil up Protection grade: IP65 Environment-friendly With standard connection box Orifice diameter: 1.5 to 3mm Explosion-proof type: M141.5, 1.5m lead Applications: Welding, printing equipment and hydraulic system Electricity, machinery manufacturing, food industry and automatic control Experimental, analytical instruments, fluid exchange, pneumatic control, medical equipment, textile printing and dyeing. Carton.
Body: WCB SS304/316/316L Ball core: SS304/316/316L Nominal pressure: PN16, PN25 and PN40 Connection: thread Seal: PTFE and PPL (special, graphite and metal rigidity seals) Fluid temperatures: C33: -30 to 150C (PTFE) C6: -30 to 250C (PPL) C7: -30 to 350C (metal hard seal) Electric: Voltages: 220 to 380V AC Ambient temperatures: -30 to 70C Protection level: IP67 Option for electric style: Ex-proof: dII BT3/T4 Signal feedback: Mechanical passive Active signal Warmer: dry internal element of actuator in dampness Operating handle: electrical actuator can be switch by hand Regulating style: 4 to 20mA signal input Pneumatic: Cylinder options: P series, Canada Puretorq and Italy air Cylinder types: double action single action Ambient temperatures: -20 to 80C Pressure: double action: 4 to 8 bars Single action: 5 to 8 bars Optional: Limit switch: remote switch signal feedback Solenoid valve: 5/2 for double and 3/2 for single action Triplicate: voltage stabilization, filter, cylinder and lubricant Hand wheel: switch valve by wheel Standards: Design: GB/T 12237-1989 Flanged: GB 9113.1 (JB, ANSI and JIS) Structure length: GB/T 12221-1989 Detection and experiment: GB/T 13927-1992. Carton/wooden box.
Name: Trunnion ball valve Model: ball valve Size: 2"--26" Pressure:150#--1500# Product Material: Carbon&Lowalloy steel/STL/Nickel bare alloy Infomation: Ball valves featuring with 2-PC or 3-PC split body, trunnion mounted ball. This type of valves has advantage of less weighted and cost effective. It is ideal for frequent on-off flow control in big size and high pressure pipeline. SHOV ball valves are fire safe test certified by TUV API607. Design Standard: Basic Design: API 6D Test: API 6D, BS 6755, API 607, API 6FA Size ranges 2¡±-26¡± RATING 150LB-1500LB MATERIAL Carbon Steel ,Stainless Steel Trim: A105+ENP, 13Cr, F304, F316 Design features: Full port or Reduce port Hard Facing Seat and Ball Metal Seated Design Cavity pressure self relief Blowout-proof stem Anti-static device Fire safe design Products range SIZE RANGES 2¡±-26¡± RATING 150-1500 Material Carbon Steel ,Stainless Steel Application: On shore oil & gas Off shore oil & gas Refinery.
The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design of the piston is unique to the market, enabling the plug to retract farther from the flow path, ensuring the highest flow capacity. The dual packing design, and a large diameter self aligning stem insures the highest cycle life. A full range of accessory items are available including limit switches, solenoid valves, manual override devices, stroke limiters. Features & Benefits: Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360 Complete line of accessories. Materials: Body, Plug, & Stem: Zeus - Bronze Ares - 316SS Seats & Seals: PTFE alve Configurations Spring Ret. N.C. Bi-directional Flow Spring Ret. N.C. Flow from Above Plug Spring Ret. N.O. Flow from Below Plug Double Acting Bi-directional Flow Manual Handle Bi-directional Flow End Connections NPT Threaded (3/8" to 2") Tri-Clamp (1/2" to 2") Butt Weld (call) 150 lb. ANSI Flanged (call) Specifications: (Viton Seals) Temperature Range: -14 to 358F Max. Pressure: 150 PSIG Typical Applications Steam Applications Air Drying Equipment Sterilizers Autoclaves Process Control Applications Laundry Equipment Textile Dyeing & Drying Bottling & Dispensing Equipment Ink & Paint Dispensing Industrial Compressors. Box.
All kinds of auto gauge OEM quality and good prices ISO9000/TS16949, QS9000/VDA6.1 certificate. Carton.
All kinds of auto gauge OEM quality and good prices. ISO9000/TS16949, QS9000/VDA6.1 certificate. Carton.
All kinds of auto gauge OEM quality and good prices ISO9000/TS16949, QS9000/VDA6.1 certificate. Carton
2PC full bore 1000PSI stainless steel threaded ball valve Connection mode: threadedThreaded standards: NPT, BSPT, DIN2999. Materials: ASTM A216-WCB, ASTM A351-CF8, ASTM A351-CF8M Size: DN6-50, 1/4-2 inches Application: water, oil, natural gas, chemical industries. Standard seaworthy.
