Pneumatic Angle Seat Valve

Pneumatic angle seat valve

Fluid pressure: pn16(0-232psi)
Control pressure; 0.3-0.8mpa(43.5-116psi)
Seals material: ptfe

Pneumatic angle seat valve

Fluid pressure: pn16(0-232psi)
Control pressure; 0.3-0.8mpa(43.5-116psi)
Seals material: ptfe

Pneumatic angel seat valve (thread)

Nominal diameter: dn15-80

Pressure range: 0-1.6-2.5mpa

Medium temp.: -20c~+180c

Ambient temp.: -20c~+60c

Valve body material: stainless steel

Sealing material: ptfe

Actuator cover: pa

Applicable medium: air, liquid, steam

Controlling pressure: 3-8bar

Type: double-acting, single-acting, no water hammer

Connecting thread standard: rp (bsp), rc (bspt), npt



Option: manual position-limit actuator

This kind of actuator can adjust the piston opening, limit travel and adjusts the valve flow. It is applicable to all types of angle seat valve and also used for emergency brake when air supply is failed or mechanical (solenoid) failure occurs.


Pc to carton box, carton box to plywood case

T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types.
Da:actuator double acting , sr:actuator single acting .

Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry,

Tork actuator features body extruted.Aluminium, hard anodized
Caps die cast aluminium, electrostatic painted
Pistons die cast aluminium
Supp.Air 4-6 bar
Ball valve body full borei, aisi 316 stainless steel and 3 parts body
Way: two way.
O-ring ptfe
Pressure suitable low and high pressure.
Temperature -20....140 c degree
Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3")
Test bntnall valves are tested 48 hour, at 20 barda


50 pcs

valve type:butterfly valve
valve body and disc: UPVC
valve seat: EPDM
valve stem: SS304
valve size: DN25-DN200, 1"-8"
end connection: wafer
media: water,oil,gas etc
working pressure: PN10bar
working temperature:-20C-+120C
air pressure: 3-8bar
actuator type: rotary 90degree

stainless steel angle seat valve

We are the manufacturer of solenoid valves,angle seat valve,pneumatic actuator, pneumatic ball valve, pneumatic butterfly valve, pneumatic solenoid valves, pneumatic filter, regulator, pneumatic hose and fittings, pneumatic cylinder.

Pneumatic Sanitary Ball Valve Overview:

Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene.
Pneumatic Sanitary Ball Valve Features:

1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated;

2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard;

3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean:

4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded.

Application of Pneumatic Sanitary Ball Valve:

Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.

Overview of pneumatic regulating ball valve:

According to the structural form, the pneumatic regulating ball valve can be divided into pneumatic O-type regulating ball valve or dynamic V-type regulating ball valve. It is mainly used with the valve positioner to make a press signal according to the input and output 4.20mA, so that

Control the rotation opening of the ball valve valve. To achieve the proportional adjustment of pipeline medium pressure, flow rate, liquid door and other parameters, among them, the pneumatic/type adjustment glass closure has knotted and removed shape objects (throwing gaps, which can adjust the flow rate according to the change of the opening area in the middle of the field, and can cut off the fluid Closed by impurities contained in the medium, suitable for the control of pulp, mortar, viscous fluid,
Pneumatic regulating ball valve principle:

The pneumatic regulating ball valve uses compressed air as the driving force to drive the ball flower to rotate back and forth, so as to achieve the opening and closing of the valve. Size, to achieve different degrees of proportional adjustment to the medium flow. When the pneumatic actuator receives the signal from the control system, it generates a corresponding thrust according to the size of the control force, and pushes the adjustment mechanism to drive the valve core to move, and completes the flow and pressure adjustment of the medium in the pipeline. It has a large rated flow coefficient. , good sealing effect, adjustable performance, etc.

â??Product Name: Pneumatic flange ball valve
Valve Type: Ball valve
Design Standard: GB,ANSI,DIN,JIS
Working Pressure: 0~1.6Mpa
Medium: water, gas, oil, acid, alkali
Medium Temperature: -20�ºC~+180�ºC
Port Size: DN15-DN200
Connection: flange
Structure: floating full port
Body Material: cast steel, stainless steel
Seat Material: PTFE
Application: water system, waster water system, oil& gas industry
Driving Way: Pneumatic actuated
Actuator Material: Aluminium Alloy
Actuator Model: AT52D-AT115D
Action: double-acting
Rotary Angle: 90�°
Air Pressure: 4~8bar
Cylinder Size: 52-115 mm
Output Torque : 20-344 NM
Working Temperature: -20C~+80C
Air Access: G1/4"
Warranty: 12 months