Working voltage: ac22010%, 50/60hz (special-made: 24vac, 110vac) Power consumption: 4w(only when you open and close the valve) Running time of each action: ¡â 18s (valve-on); ¡â 15s(valve-off) Nominal pressure: 1.6mpa Applied medium: cold or hot water, glycol water liquor ( 50%). Medium temperature: 2-75 Working environment temperature: -5+50 Material of actuator: outer cover: pc engineering plastic Base: enhanced pps (fire-resistant) 0.7kgs 15*13.5*8.5 cm 43*32*35 cm 32pcs/ctn
Working voltage:85~265vac, 50/60hz Working environment:temperature:-10~+50ºc Relative humidity:rh
Manifold Valve
The manifold valves are manufactured to endure all differential pressure and liquid level application needs. Manifolds Valve is designed for static pressure and liquid level applications. These manifolds are available in traditional and compact body designs. Manifold connections include female tube fittings, pipe ends (NPT and ISO 228/1), and flanges (MSS SP-99) in 1/2 and 3/4 in. and 12 mm sizes The units are available in 2 valve manifold, 3 valve manifold, and 5 valve manifold product designs.The 2 valve units are designed to withstand static pressure in an industrial setting. The 3 level and 5 level valve units are expressly designed for the purpose of surviving and maintaining the differential pressure applications. The units have been designed with a temperature rating with operating parameters which range up to 232 C with packing of PTFE and optional 428 C with packing of graphite. The units are designed and manufactured to withstand a pressure parameter rating of up to 6000 PSIG.
Hitesh Metal is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleed off or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification. Hitesh Metal also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers specifications at affordable rates. Types of 2 Way, 3 Way & 5 Way Manifold Valves 2 Valve Manifolds Straight Type Tee Type H Type 3 Valve Manifolds Straight Type Tee Type H Type 5 Valve Manifolds Straight Type Tee Type H Type Monoflange Valves Dimensions of ANSI/ASME B16.10 Manifold Valves 2-Way Manifold Valve NPT Inlet & Outlet & NPT Vent Plug NPT Inlet & NPT Vent Plug NPT Inlet & Outlet &NPT Vent Plug NPT Inlet & NPT Vent Plug NPT Inlet & Outlet & Vent Plug 3-Way Manifold Valve NPT Inlet & Outlet NPT Inlet NPT Inlet & Outlet & NPT Vent Plug 5-Way Manifold Valve NPT Inlet & Outlet & NPT Vent Plug NPT Inlet & NPT Vent Plugs NPT Inlet & NPT Vent Plugs
Manifold Valve with Swivel end Fittings
1. Temperature sensor Temperature hysteresis:1.0 k Max admissible static pressure:10 bar Max admissible differential pressure:1.0 bar Normal pressure:16 bar Max temperature resistance:110 degree Temperature extent: 6-28 degree Relation Mark with temperature Room temperature(°c): 6 12 16 20 24 28 Scale interval: * 1 2 3 4 2. Thermostatic valve body Made of brass,easy to be installed Low resistance Water temperature : less than 120 degree Normal resistance to pressure: 10 bar Size DN15(1/2") DN20(3/4'') DN25(1'') Type Angled valve Straight valve 2-port vavle 3-port valve H valve Mixing valve Weight information (valve body only) DN15(1/2") DN20(3/4'') DN25(1'') Straight 245g 315g 390g Angle 230g 300g 370g 3 way 360g 455g 600g 3. Packaging & Shipping Packaging Details: 50 sets per carton with paper box ,carton size:51x36x22 cm; 40 sets per carton for blister packing, carton size : 48x35x29 cm; 100 pieces per carton for only thermostatic head, cartons size: 40x30x30 cm; 60 pieces per carton for only thermostatic valve body, carton size: 41x25.5x26 cm; About 20000 sets /20" container with blister packing; About 25000 sets/20" container with carton box; Pallet packing is available. Delivery Detail: 25 days but based on your order quantity 4. Our Services 1. Production time: 30 days normally. 2. Guarantee: 3 Years guarantee. 3. OEM&ODM services. 4. Payment terms: 30%TT as deposit payment,70%TT before of shipment; L/C is available. 5. Delivery terms: FOB BEIJING, FOB NINGBO or FOB Shanghai.
Passed CE/ISO9001/ISO14001 Temperature range:6-28 °C Setting number 0 to 5 Limitable and lockable Can be mounted vertically or horizontally M30 x 1.5 universal type head to body Chrome plated Frost protect DN15/20/25 avaiable OEM branding available Liquid sensor
Nominal Pressure: 1.0 MPa; Regulatory Scale: 0 - 5; Temperature Control Range: 8 - 28 deg C; Size: 3/4", 1";
