Find Verified Copper Millberry Scrap Suppliers, Manufacturers and Wholesalers

Item
Test result
Copper
99.9%

0.003%


As customet requirement.

Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.

Distillation column For Ethanol Alcohol Plant
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.
    a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .
 It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.

Specifications:
Thickness: 1/4oz~2oz(9µm~70µm)
Width: 260mm ~1290mm
(for normal pcb)

Vlp ed copper foil
Specifications:
Thickness: 1/4oz~3oz(9µm~105µm)
Max size: 1295mm×1295mm

Performance:
ClassificationUnit9µm12µm18µm35µm70µm105µm
Cu content%=99.8
Area weigthG/m280±3107±3153±5283±7585±10875±15
Tensile strengthR.T.(23?)Kg/mm2=28
H.T.(180?)=15=18=20
ElongationR.T.(23?)%=5.0=6.0=10
H.T.(180?)=6.0=8.0
RoughnessShiny(ra)µm=0.43
Matte(rz)=3.5
Peel strengthR.T.(23?)Kg/cm=0.77=0.8=0.9=1.0=1.5=2.0
Degraded rate of hcl(18%-1hr/25?)%=7.0
Change of color(e-1.0hr/200?)%Good
Solder floating 290?Sec.=20
Appearance(spot and copper powder)----None
PinholeEaZero
Size toleranceWidthMm0~2mm
LengthMm----
CoreMm/inchInside diameter 79mm/3 inch

High-precision rolled copper foil
Rolled copper foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material.
Base material: c11000 copper, cu > 99.96%
Thickness range: 0.009mm-0.15mm
Width range: 200mm-640mm
Temper: hard, soft
Application: ccl, electronics shielding and heat radiation, wide copper tape etc.
NameGbAlloy no.Size (mm)
(iso)(asmt)(jis)(bis)(din)
Copper foilT2Cu-etpC11000C1100C101R-cu57Thickness: 0.009-0.15 /max width: 640
ItemUnitThickness
9um12um18um35um70um90um
PurityCu%=99.97
Surface roughnessRaUm=0.17
Tensile strengthRm(hard)N/mm2420-440450-470460-480430-450410-430
Rm(soft)N/mm2160-180180-220200-230210-240220-250
ElongationA50(hard)%0.8-1.20.8-1.31.0-1.51.2-1.81.5-2.0
A50(soft)%=5.0=6.0=8.0=10.0=15.0=20.0
Oxidation resistance200?Min60
PinholeEaNone
WidthMm100-660
Width accuracyMm0~ +2
Core/3 in, 6 in, 80mm
Note: we can provide products with other properties according to customers` requirements.

Physical properties
Density: 8.9g/cm3
Electrical conductivity (20°c): min 90%iacs for annealed to temper
Min 80%iacs for rolled to temper
Thermal conductivity (20°c): 390w/(m°c)
Elastic modulus: 118000n/m
Softening temperature: =380°c

Sizes and tolerances (mm)
ThicknessThickness tolerancesWidthWidth tolerances
0.012~0.04± 0.001100~600± 0.1
> 0.04~0.10± 0.002

Specifications available (mm)
ThicknessWidthTemper
0.012~0.04100~600O, h,
> 0.04~0.10100~600O, h

Ed copper foils for fpc

Dimension range:
Thickness: 9~35µm

Performances:
The product surface is black or red, has lower surface roughness.

Applications:
Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film.

Features:
High density, high bending resistance and good etching performance.

Ed copper foils for fpc

Dimension range:
Thickness: 9~35µm

Performances:
The product surface is black or red, has lower surface roughness.

Applications:
Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film.

Features:
High density, high bending resistance and good etching performance.

S-hte ed copper foils for pcb

Specifications:
Thickness: 1/4oz~2oz(9µm~70µm)
Width: 260mm ~1290mm
(for normal pcb)


Vlp ed copper foil
Specifications:
Thickness: 1/4oz~3oz(9µm~105µm)
Max size: 1295mm×1295mm

CuCo1Ni1Be/CW103C Cobalt Nickel Beryllium Copper

Chemical Composition:
Be: 0.40-0.70%
Co: 0.80-1.30%
Ni: 0.80-1.30%
Cu: Balance
Note: Copper plus additions equal 99.5% minimum.

Shapes :
Round bars, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.

Available Sizes:
Rod: Dia.5~16mm; Wire: Dia.0.1-5.0mm
Tube: OD10~60mm, ThK 0.1~10mm
Plate: thk min 0.5mm
Custom Diameter & Sizes, Random Mill lengths

Typical Physical Properties:
Density (g/cm3): 8.83
Density before age hardening (g/cm3): 8.75
Elastic Modulus (kg/mm2 (103)): 14.10
Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6
Thermal Conductivity: 209 W/m â?¢ oK at 20 C
Melting Range (°C): 1000-1070
Note: 
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.

Related Standard :
Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3
Sheets: ASTM B534
Wires: ASTM B441
Plates: ASTM B534, SAE J461,463; RWMA Class 3
European Standards: CuCo1Ni1Be, CW103C to EN

Other material are also available
C17200/CuBe2/CW101C/DIN 2.1247
C17300/CuBe2Pb/CW102C/DIN 2.1248
C17500/CuCo2Be/CW104C/DIN 2.1285
C17510/CuNi2Be/CW110C/DIN 2.0850
CuCo1Ni1Be/CW103C

C18150 Chromium Zirconium Copper bar as per RWMA Class 2

Ed copper foils for fpc

Dimension range:
Thickness: 9~35µm

Performances:
The product surface is black or red, has lower surface roughness.

Applications:
Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film.

Features:
High density, high bending resistance and good etching performance.


S-hte ed copper foils for pcb

Specifications:
Thickness: 1/4oz~2oz(9µm~70µm)
Width: 260mm ~1290mm
(for normal pcb)

S-hte ed copper foils for pcb

Specifications:
Thickness: 1/4oz~2oz(9µm~70µm)
Width: 260mm ~1290mm
(for normal pcb)

One-side shiny

High-precision rolled copper foil
Rolled copper foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material.
Base material: c11000 copper, cu > 99.96%
Thickness range: 0.009mm-0.15mm
Width range: 200mm-640mm
Temper: hard, soft
Application: ccl, electronics shielding and heat radiation, wide copper tape etc.

Note: we can provide products with other properties according to customers` requirements.

Physical properties
Density: 8.9g/cm3
Electrical conductivity (20°c): min 90%iacs for annealed to temper
Min 80%iacs for rolled to temper
Thermal conductivity (20°c): 390w/(m°c)
Elastic modulus: 118000n/m
Softening temperature: =380°c

C17200/CuBe2/CW101C/DIN 2.1247 Beryllium Copper

C17200 is manufactured to provide a combination of high strength and hardness properties coupled with superior thermal properties. This range of properties makes C17200 the premier material for copper alloy molds and a wide range of other applications from oil and gas to aerospace.

Chemical Composition:
Be: 1.80-2.0%
Co+Ni: 0.20% Min.
Co+Ni+Fe: 0.60% Max.
Cu: Balance
Note: Copper plus additions equal 99.5% minimum.

Material description:
High strength, good fatigue strength, good conductivity,
non-magnetic, wear resistance

Applications
- Nozzles and needles for hot runner systems
- Inserts in plastic blow moulding and plastic injection moulding
- Needles and nozzles for hot canal systems
- Packing bearings rings in extreme high pressure hydraulics(e.g. jet cutting)
- Stud holders for stud welding equipment
- High strength, non-magnetic, non-sparking parts, sleeves,bushings, bearings for offshore, onshore, airplanes, precision instruments and medical applications moulding

Shapes :
Round bars, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.

Available Sizes:
Rod: Dia.5~200mm; Wire: Dia.0.1-5.0mm
Tube: OD10~60mm, ThK 0.1~10mm
Plate: thk min 0.5mm
Custom Diameter & Sizes, Random Mill lengths

Related Standard :
Rods/Bars/: ASTM B196; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651;
RWMA Class 4, GOST 15835
Tubes: ASTM B251,643
Strips: ASTM B194, AMS4530,4532; SAE J461,463, GOST 1789  
Sheets: ASTM B194
Wires: ASTM B197, AMS4725, SAE J461,463, JIS 3270, GOST 15834
Plates: ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4.
European Standards: CuBe2, DIN 2.1247, CW101C to EN, BrB2

Other material are also available
C17300/CuBe2Pb/CW102C/DIN 2.1248
C17500/CuCo2Be/CW104C/DIN 2.1285
C17510/CuNi2Be/CW110C/DIN 2.0850
CuCo1Ni1Be/CW103C

DAILY: South-central China Scrap Price Stable, Supply-demand Standoff Continues
Prices of scrap remained broadly stable in South-central China on Monday. 6-10mm HMS stayed at 2650-2700 yuan/t in Henan; 2630-2680 yuan/t in Hubei and Hunan; 2660-2710 in Guangdong.
According to SteelHome survey, traders were inactive in low-price sales. In addition, the large consumption supported the price to perform sturdily in these areas.
Currently, the supply-demand standoff continues.
SteelHome considers that scrap price may keep stable in the short run by and large.
Link: Market price of Wuhan Scrap on Sep 28,20
Link: Market price of Henan Scrap on Sep 28,20
Link: Market price of Guangdong Scrap on Sep 28,20

DAILY: East China Scrap Price Broadly Stable, Eye on Peak Steel Order Season
Prices of scrap remained broadly stable in East China on Thursday, but up by 30 yuan/t in some areas. 6-10mm HMS stays at 2730-2780 yuan/t in Jiangsu; at 2760-2810 yuan/t in Shandong; at 2730-2780 yuan/t in Fujian; up 30 yuan/t to 2730-2780 yuan/t in Anhui.
Currently, traders are optimistic about the further market developments as the rebar futures price and semis price rose lately. Meanwhile, September is the peak sales period for steel products in China.
According to SteelHome survey, the volume of scrap arrivals at some Chinese steel mills decreased from the week before.
SteelHome considers that prices of scrap may edge up amid fluctuations in the short run.
Link: Market price of Jiangsu Scrap on Sep 3,20
Link: Market price of Anhui Scrap on Sep 3,20
Link: Market price of Fujian Scrap on Sep 3,20
Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.

SteelHome Express: East China Scrap Price Broadly Stable on Thursday
Prices of scrap remain broadly stable in East China on Thursday. 6-10mm HMS stays at 2730-2780 yuan/t in Jiangsu; at 2760-2810 yuan/t in Shandong; at 2730-2780 yuan/t in Fujian; at 2700-2750 yuan/t in Anhui.

Scrap suppliers are active in sales due to the dropped rebar futures price lately. With the tight supplies, prices of scrap may observe rangebound movements in the near term.

Link: Market price of Anhui Scrap on Aug 27,20

Link: Market price of Jiangsu Scrap on Aug 27,20

Link: Market price of Shandong Scrap on Aug 27,20

SteelHome Express: East China Scrap Price Broadly Stable on Monday
Prices of scrap remain broadly stable in East China, but rise in some provinces on Monday. 6-10mm HMS stays at 2700-2750 yuan/t in Jiangsu; up 30 yuan/t to 2760-2810 yuan/t in Shandong; up 2730-2780 yuan/t in Fujian; at 2670-2720 yuan/t in Anhui.
Currently, scrap traders await the price to rise as the steel price increased last week. At the week, some steel mills raised the procurement price for scrap products.
SteelHome considers that prices of scrap may remain at current high levels, and to rise in some provinces where the price has not come to high levels.
Link: Market price of Anhui Scrap on Aug 24,20
Link: Market price of Jiangsu Scrap on Aug 24,20
Link: Market price of Shandong Scrap on Aug 24,20

SteelHome Express: East China Scrap Price Roughly Stable on Monday
Prices of scrap remain broadly stable in East China on Monday. 6-10mm HMS stays at 2680-2730 yuan/t in Jiangsu; 2700-2750 yuan/t in Shandong; 2680-2730 yuan/t in Fujian; 2670-2720 yuan/t in Anhui.

Several local steel makers have lowered the procurement price by 20-30 yuan/t as the futures price for rebar and steel price start dropping. The overall supply is tight amid the hot days.

SteelHome considers that prices of scrap may remain stable in the near term.

Link: Market price of Jiangsu Scrap on Aug 10,20

Link: Market price of Anhui Scrap on Aug 10,20

Link: Market price of Shandong Scrap on Aug 10,20

Link: Market price of Fujian Scrap on Aug 10,20

SteelHome Express: East China Scrap Price Roughly Stable on Active Shipping Operations from Supplier
Prices of scrap remain roughly flat in East China on Monday. 6-10mm HMS stays at 2630-2680 yuan/t in Jiangsu; 2620-2670 yuan/t in Shandong; 2600-2650 yuan/t in Fujian; 2600-2650 yuan/t in Anhui.

Affected by slack steel sales during the heavy rainfalls in Southern China, some steelmakers have lowered scrap procurement price by 20-50 yuan/t. Meanwhile, scrap shipments from suppliers have increased. SteelHome considers that East Chinaâ??s scrap price may drop in the short run.

Link: Market price of Anhui Scrap on Jul 6,20

Link: Market price of Fujian Scrap on Jul 6,20

Link: Market price of Shandong Scrap on Jul 6,20

Link: Market price of Jiangsu Scrap on Jul 6,20

Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.