MS 2000- Parts Elastic Sealant DESCRIPTION: MS2000 is an adhesive and sealant based on MS-polymers to provide a two –part, fast curing product. It has an outstanding bonding strength and prime less adhesion on various types of substrates. ADVANTAGES: Eco-friendly, Green, Healthy High efficiency, suitable for large-scale construction Less than 5% of the waste, saving costs Excellent weather resistance Outstanding Surface compatibility with paint systems No pollution to the substrate Excellent adhesion No pollution to the substrate Low modulus, high elongation, suitable for large displacement seams APPLICATION: Joint sealing for PCA board Joint sealing for metal wall hanging Joint sealing for concrete products Sealing Around the window frames. NOTICE: Not applied to GLASS After the two-component mixing the gel time of 3 hours, the need for construction at this time Must comply with the primer, otherwise no adhesion TEST RESULT: Item Results GB/T22083-2008 F-25LM Elastic recovery% 90 Tensile Modulus 23 0.2 - 20 0.3 Tensile properties NO DEMAGE Adhesion/cohesion properties at variable temperatures NO DEMAGE Adhesion/cohesion properties at constant temperature NO DEMAGE Extension after immersion in water NO DEMAGE Volume Loss(%) 2 Liquidity/MM 0 SPECIFICATION: Properties Parameter Appearance White paste, all colors Ratio=main agent: harder: color paste 100:10:5 Shelf life(under 25) 6 months Density(g/cm3) 1.1 Operation time 5 5 23 2/4/6 35 2( summer Package 4L
1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
One Component Thermal silicone Grease/Lubricating silicone Grease CAS No.:67763-03-05 Other Names:adhesives sealants MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SI1101 Type:one-component Product name:Thermal silicone Grease/Lubricating silicone Grease Color:White Paste Density: 2.2 Thermal conducivity: 1.5 Packing: 2 KG/Bucket Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples sample time: within one week Packaging Details:Package for Thermal silicone Grease 2 KG/Bucket Delivery Detail:10 days
It is a one-part polyurethane product formulated by Gorcci International. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.
It is used to clean the gun extrusion tube, adapter and other unwanted foam before cured. You might need this when using gun/ professional type PU foam (for straw/manual type PU foam, foam cleaner is not necessary). 2-year shelf life.
It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%. The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%. Characteristics Strong acid neutralization capacity Good oil solubility Scatter glial and ash Good anti-rust and anti-foam ability Good thermal stability and hydrolytic stability Excellent performance of water resistance and high-temperature detergency. 200 liter metal drum (net weight: 200 kg/drum).
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid. Characteristics: Be available for all kinds of base oils The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc. The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224. 200 liter metal drum (net weight: 200 kg/drum).
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid. The recommended dosage is as below: API grade Single-grade Multi-grade SB/CB 1.8% 2.0% SC/CC 1.8% 2.0% SD/CC 3.5% 3.9% SE/CC 3.5% 3.9% SF/CD 4.0% 4.4%. CHARACTERISTICS Excellent detergency, dispersion and anti-oxidation ability. 200 liter metal drum (net weight: 200 kg/drum)
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%. The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Is a one component polyurethane foam used to seal gaps and crevices. The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure. Pu foam is widely used in sealing around doors, windows, pipes, indoor fittings or any other application in construction. Provides an excellent bond to lumber, plywood, concrete, metals, masonry and other substrates. 750ml, 12cans/ctn
USD650/T FOB shanghai.This is Heaven Zhu from Chemix Specialty Chemical Co.,ltd(C.S.C), in China. We are promoting 98% Calcium Formate on construction grade.
It can achieve good adhesion effect, environmental taste , high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special adhesive. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a/filter degumming problem such as adhesive, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
This series product is suitable for use in medical industry, the softening point of 80 degrees or so, wide range of uses, specific have infusion stick adhesive, base cloth, pressure sensitive adhesive products, such as white, yellow and black lump hot melt adhesive, to ensure product safety and health, no harm to human body, health, to ensure that the use of rest assured, with enjoyable. Hot melt adhesive is an environmental hot melt adhesive which meets the international fda standard and is not allergic to the skin. With the constant innovation of medical supplies, hot melt adhesive is more and more play its unique role, it has long been used in medical supplies material bonding, now it is a bigger role as the carrier of drug and skin nicely. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
Tiandiao hot melt adhesive, softening point of 80 degrees or so, this series product is suitable for display showcase display ark of goods such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, extra adhesive, suitable for all kinds of working environment. Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with adhesive. The products have been certified by sgs, which is non - toxic. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil. The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
This series of products are suitable for all kinds of sealing mouth glue, softening point of 80 degrees or so, mainly for the bottom of the bag, carpet glue, carpet ruffled, express single seal, wood sealing side, automotive interior bonding, arm in arm bag on the ground, dialysis paper, paper bag sealing glue sealing purpose, guarantee the bonding material without extra adhesive, stability, safety and health, no harm to human body, no taste, using at ease. Suitable for carton sealing, milk powder box, other color box and other sealing or bottom, side bonding with hot melt adhesive. Open time moderate, very excellent low - temperature resistance. - 20 below zero remains very strong cohesive force. It has very good temperature resistance. The product has good weather resistance and strong adhesion.
Tiandiao hot melt adhesive, softening point of 80 degrees or so, the series of products for a variety of clothing accessories, advanced material glue, shoe glue, wide range of uses, tasteless colorless, non-toxic, belong to the environmental protection hot melt adhesive, guarantee the stability of the clothes and shoes to prevent the degumming, no effect to human body health. Material rubber features are melting point of 80 degrees or so sticky: 3000 mpa. S / 150 shear strength: 210 n/min, transparent yellow granular, without impurities, no bubble. This product has strong adhesiveness, good thermal stability, the advantages of high hardness, no wiredrawing, suitable for high-end shoe adhesive and various kinds of clothing accessories, leather folding with hot melt adhesive, leather case is mainly used for albums, hardcover notebook cover, bags and other leather materials and use. The product is through sgs environmental detection, cheap and fine.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive. Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180
