1) protection different zone: 32 zones with 32 different zones indicated on panel. 2.
2) each zone can be put more sensors.
3) partial disarmed optional by remote control. One keypad easy to partial disarmed
Some sensors that programed in the second zone.
4) auto-dial up 6 phone numbers and recycle to repeat unless confirmed.
5) store voice recorded message (10 second) , it can be recovered. When received alarm
Message, it speaks as you spoken.
6) li-ion rechargeable battery to back up power built-in panel: >36hours. Auto-switch if ac power is off.
7) telephone manages the alarm system, convenience.
8) phone trunks protected to avoid any designing destroy.
9) led on the panel to display protection zone.
10) pir detector is preset for the second zone which can be disarmed solely
11. Audible / mute siren optional.
12) quick program by the panel keyboard.
13) when received alarm call, you can press the keypad on the phone to disarm / arm / monitoring / start on / off siren
14) panel keyboard password protected and incoming calling password protected.
15) alarm time can be customized.
16) siren sounds time / alarm triggered time / armed alarm times to be programmed to be delayed
17) all panels can connect with the alarm receipt managing centre
18)easy to learn the new remote control to change the code and work with new sensors
1. Revoling Door Size: 2200L x 1400W x 2300Hmm
2. Material: 304stainless steel
3. Signal: passive node; TTL signal; RS232 communication interface(selective); TCP/IP communicate interface(selective)
4. Turning Direction of Gate Bar: bi-directional; single-directional
5. Controller: using 16-bit microprocessor as a core device, can be processed according to client's requirement
6. Interface: standard input /output interface
7. Working Power: AC220Ví+10%
8. Power (optional): AC220Ví+ 10%; DC24V3Aí+ 10%; DC12V3Aí+ 10%
9. Working Environment: indoor /outdoor
10. Temperature: 0degree celsuis~65degree celsuis (customized available)
11. Humidity: 5%~90%
12. On/Off Time: 1second
13. Failture Status: allow passing after power interrupt
14. Light Indication: green light passing; forbidden passing for red light
15. Casing Protection: sealing for waterproofing
16. Service Life: continous rotation of more than 3 million.
1. Driving Mode for Gate Bar:
2. Turning Direction of Gate: single-directional; bi-directional
3. Mechanism Driving Mode: direct-current motor
4. Driving Mode of Gate Bar: automatic rotation; manual rotation; rotating 10degree manully then turn automatically
5. External Devices: able to external connection of IC, ID, barcode and other reading and writing devices
6. Protection: able to turn if the external force is over the setting point, the tripod will be moved, then resetting automatically
7. Anti-reversal Function
8. Temperature: 0degree celsius~60degree celsius
9. Humidity: 5%~95%
10. Speed: >15people /minute
11. Noise: less than 50dB
12. Channel Width: 550~570mm
13. Working Environment: indoor,outdoor(need rain-proof frame)
14. Overhaul Manholes: two
15. Service Life: 3million continuous switching
16. Power Consumption: 60W.
1) Main function: recording video and audio at the same time, USB drive.
2) Video format: AVI, 720*480 resolution
3) Internal Memory: 2GB/4GB/8GB
4) USB interface: 2.0ú¿Hsú¬
5) Charging time: 3-4 hours
6) Charging voltage:DC-5V
7) Battery use time: built-in Li battery, can work continually 2-3 hours
8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ VISTA or above (windows98 is excepted)
Operationu Switch onOpen the cover on the bottom the bottle, under power-off mode, press the switch button to the í
Attention: Assure that the device is under power on mode when reset time.
Attention
1) If it's lack of electricity while recording, the file will be saved before the device turns off.
2) When taking video continually, the system will automatically generate a new video file after each operation.
3) Under a bright environment, keep camera vertical, stable and keepcertain distance from the scene you want to record in order to achieve a best effect .
4) Connect to computer: The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can't identify, please make sure your operating system, drivers and USB interface cable in good work order, then connect again.
l Technical Data
1) Main function: recording video and audio, taking photo, PC camera, USB drive
2) Video format: AVI, 1280*960
3) Photo format: JPEG, 1280*960
4) External memory: SD card 2GB-8GB
5) USB interface: 2.0
6) Charging time: 2-3 hours
7) Battery time: built in Li-battery, 1~2 hours.
8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ Vista or above (Windows98 is excepted)
l Operation
u Switch onInsert SD card into the slot before power on.
u Recording video and audio1) Press Power on/ff button for some seconds, yellow and blue light turn on together, 2 seconds later, both of them turn off, it starts recording.
2) Press the button once, the light turns yellow, the device stop recording and store the data. It comes to video & photo standby mode again. At this time, press Power on/ff button for some seconds again, yellow light turns off, the camera start recording again.
u Taking photoUnder photo standby mode, press Power on/ff button once, yellow light flashes once then turns off, one photo is taken and saved.
u Switch offUnder standby mode or video recording mode, press Power on/ff button for some seconds, the blue light flashes 2 times then turns off.
Under any mode, insert the clip to the reset hole, the camera will power off.
Attention: while recording mode, press the reset hole to power off, the video can not be saved.
u ResetUnder incorrect operation or a certain reason, the camera may stop working, at this time, insert the clip into the reset hole to reset, then the camera is under power off mode.
While resetting, just a little strength is enough.
u Play back videoUnder power off mode, connect USB cable with the camera first, then connect the USB cable with computer, there will be a moveable disk shown on computer, click the disk and playback the video.
Attention: when there is no action with computer, reset the camera with the clip, then reconnect the camera with computer.
u PC cameraUnder power on mode, connect the camera with computer, install the PC camera software STK02N 2.0.exe in the manual CD, the PC camera will work.
u ChargingIf the device is of low electricity, yellow light and blue light flash two times together, then power off, the video file will be saved automatically before shutting down.
1) Connect the camera with computer, when charging, yellow light keeps on, yellow light and blue light turn on together when fully charged.
2) Connect the camera with charger, when green light of the charger keeps on, indicating it is being charged. When the yellow light turns off, it shows that the camera is fully charged.
Attention: charging via charger is suggested.
u Set ting timeWhen using the device for the first time, you can reset the time through the following way:
1) Connect the camera with computer
2) Create a new í¦ time.txtí¦ file
3) Edit time as format: 2010.12.12 12:12:12 in the file
4) Copy the file to the root of the disk of the camera
5) When starting the camera again next time, the time will be simultaneous as the time file.
l Attention
1) When the device is lack of battery when taking video, the system will save the video data first, then shut down automatically.
2) Connecting computer: while connecting, do not do any operation, if the device cannot be recognized by computer, please check the computer system, driver, USB port, USB cable, then reconnect.
3) As the devise has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.
4) While resetting, just a little strength is enough.
1. 1.5MM stainless steel, not easy to rust.
2. LED indicated passing status.
3. 16 sets of operating mode, can adjust to normally open status.
4. Reliable safety precautions
5. Alarm function, convenient for maintain and usage.
6. Memory function, user can set to access repeatedly or passing with single card reader .
7. Good augmentability function, suitable for many kinds of card reader, and meet the request of different clients, such as barcode, IC, ID, fingerprint.
8. Standard electric interface, can connect with many kinds of reader, remote control and management.
9. Running smoothly, low noise, good stability.
10. Driving Mode: photoelectric sensor, motor driven.
11. Access Speed: í¦30 people /minute( N/C states), í¦60 people / minute (N/O states).
12. Channel Width: 60MM
13. Temperture: 0 degree~ 60 degree
14. Humidity: 5%~90%
15. Using Life: over 300million
16. Overall Dimensions: 1880L x 320 W x 1040H (mm)
1. Revolving Door Dimensions: 2200L x 1400W x 2300H mm
2. Door Material: 304 stainless steel
3. Drive Way: Electronical without mechanical card agency.
4. Turning Direction of the Gate Bar: A: bi-directional B: single-directional
5. Controller: using 16-bit microprocessor as a core device, able to programmed according to clients' needs.
6. Interface: Standard input, output interface, able to used for other system intefration.
7. Sigal: 1) Dry connect spot; 2) TTL signal; 3) 232 communication interface; 4) TCP / IP communication interface (selective)
8. Working Voltage: AC220í+10%
9. Power Supply: AC220í+10%; DC24V3Aí+10%; DC12V3Aí+10%
10. Working Enviornment: indoor / outdoor
11. Temperature: 0íµ~65íµ( special temperature need to be booked.)
12. Humidity: 5%~90%
13. On / Off Time: 1 second
14. Passing Speed: 25people /minute
15. Light Prompt: green light passing, red light no passing
16. Failure Status: Passing freely after power interrupt
17. Service Life: more than 300 million
18. Shell Protection: waterproof seal
19. Card Reader Installation: 2
20. Installation and Maintenance Position: 1
21. Protective Devices: external infrared protection grating
4-CH MJPEG Digital Video Recorder
DVR-MJ14 is a 4-channel compact DVR with motion detection record function & USB2.0 for video backup to computer. Advanced M-JPEG hardware compression provides hi-resolution playback picture quality. The DVR is ideal for usage in home to watch over premises & valuables and in business to monitor customers & staff.
Mini design for homes, small retail stores, offices
High resolution picture quality
Motion detection recording
Motion detection with sensitivity & area settings
With auto record function
One SATA HDD interface, supports up to 500GB HDD
Built-in USB2.0 port for video backup to computer
With auto-switch display function
Password protection
With IR remote control
Self-recovery after power reconnected.
Total video resources: 400 frames.Cif. Cif/half-d1/d1 for choice.
Standard infra-red remote control, mouse, vga, network, ptz control 485/422/232.
Alarm input: 16bnc. & alarm output: 4bnc.
Can be accessed by cd-rw and dvd-rw.
16bnc can be played back retrieval at the same time and the speed is up to 1 times, 2 times, 4 times, 8 times, 16 times, 32 times, 64 times, 128 times.
Sensitivity: better than 1/10th oz per year r12
Response time: 0.1 second
Spares supplied: 1 spare sensor , 1 pack filters , 1 check leak shipping
Specification: 356 x 75 x 89 mm
Battery life: 30 hours normal use
Function and Character
(1) The door is steady, robust and long service life .easy to be conveyed, mounted and dismounting.
(2) Easy Assembly,The modular design allows for a quick and very simple assembly. Only 8 screws are required for.
(3) Overhead Control Unit: LED Display, alarm lights, LED bar graphs and control touch pads plus all wiring, connections and electronics are integrated into the overhead compartment.
(4) Accurate location: 6 independent distributing search coverage and acousto-optic alarm when target is found. Panel indicator light directly displays the alarming area which can exactly indicate the target.
(5) Entry Pacing Lights: Smooth, efficient traffic flow with easy-to-view, eye-level pacing lights on the entrance side of each panel.
(6) High adjustable sensitivity: JH series digital scanner gate is adjustable. In the highest volume, articles as small as a paper clip can be detected and indicated.
(7) Complex circuit, infrared installation and computer automatic identification decrease the mistakes and missing dramatically. It can automatically show the alarm frequency and numbers of passed people.
(8) Adjustable Flexibility: We can reach the security requirements by adjusting the flexibility. There are 100 flexibility degrees in each detective area.
(9) Password protection setting: You can change the system, flexibility and other setting only after typing in the pass word correctly and only authorized person allowed to change the setting can't change the settings.
(10) Adoption of weak magnetic field launching technology will not cause harm to heart pacemaker wearer, pregnant women, disks and videos.
(11) Two or more gates can work simultaneously
(12) Warranty:Limited 12 months, parts and labor.
75.3*49.3*25.5cm G.W:22KG 231*59.5*16.5cm G.W:66 KG
This manual will be a precious learning tool in conjunction with the instructional video to become skilled at using the model 20 electroscope. As the owner of the model 20, it is important to learn proper operating procedures in order to take full advantage of the benefits this treasure hunting accessory will provide. LetÆs examine the features and functions of the model 20 electroscope.
Pulse ar iii
This professional metal detector and gold detector detects large objects at 6 m (20 feet) and deeper. Pulse-induction metal detector with microprocessor control for all kinds of metal available for gold seekers!
There are important advantages in comparison to conventional metal detectors!
? pulse-induction technology with metal differentiation ? undisturbed search in mineralized grounds and salt water ? 5 different search coils with auto-adjustment ? high sensibility compared to gold and other precious metals ? convenient search and easy handling
More than 6 m (20 feet) depth-activity: only with large search-coils it is possible to locate larger objects in a depth ofmore than 6 meters. In comparison, conventional detectors with one coil only allow a searching depth of less than 5 meters.
Larger searching-areas: you can scan large areas with a 1 x 1 m (40") search-coil (pulse-induction technology) convenient and quick. (for example: for scanning a football ground you only need 3-4 hours! with a conventional tool with a normal coil you would need weeks).
Undisturbed searching: saltwater, mineralized grounds are no problem for pulse ar iii because with the help of the reset button, most of the disturbing mineralized stones that lead to errors can be neutralised. Most of the mineralized grounds contain stones with metallical characteristics, which are denounced by most of the metal detectors. You can neutralize most of the stones with the pulse ar iii (in this case the searching-activity can be reduced a little).
Differentiation of metal for medium and larger objects: the pulse ar iii can identify metallical objects beginning at a size of 5 x 5 cm (conventional metal detectors can only differentiate very small metallic items). You can save a lot of work in practice if deep lying metallical objects can be identified by its metal kind.
Electroscope user in the search of gold, silver or other objects in the search to spend time before the scope of practice appropriate skills is essential. This will improve the use of the scope of your skills and enhance your valuable objects in the search efficiency. Now we look at the model-b characteristics and functions. Power of model-b is a nine-volt alkaline battery, the battery is located at the bottom of the device. Push the slide switch to the left so that the location is connected to activate the model-b, slide switch is located behind the model-b red board. Model-b through the sliding back of the button, and assigned to the left or the right to determine the pattern you need: gold or silver.
The use of model-b pre -
1). Slide switch, activate the apparatus.
2). Tuning knob to adjust the best equipment. (may take some time to do on the device id in order to find the best location of the resonance frequency)
3). An outdoor target placed in front of you on the ground or buried in a gold and silver you want to detect the target sample, and then stand away from the target b-foot outside.
4). The center out of three antennas, antenna away side.
5). Select settings button: gold or silver
6). In order to reduce the height of apparatus equipment in the location of zero point to the bottom, the arms stretch along the side of the body.
7). Enhance the regulator to prepare a comfortable position, usually on your left side of the test target 45 degrees.
RSB-01A is a 6-Band radar shape portable cell phone jammer. It is the latest independent research and development of a plastic casing, dual fan, built-in antenna, and uses a dedicated industrial power signal jammer cell phone, and its style is not any one of the novel has an interesting style radar It includes almost all current mobile phone signal band (including the latest in 3G services), and targeted for signal jamming, excellent design and raw materials made it the degree of life and utility greatly increased, And it is particularly suitable for examination of all places.
The specific characteristics
1. 6 band design
The cell phone jammer in a 6-band design, a fundamental solution to the jamming signal instability, sporadic phenomenon, the absolute cell phone text messages can be masked, even from mobile phone base station signal transmission can be guaranteed of more recent jamming a classroom, if the signal transmission from the phone to talk about far more than you can use a single classroom.
Because of the costs in recent years, cell phone jammer are used by manufacturers of multi-channel approach to reduce the cost of the merger, this is bound to interfere with mobile communications uplink signals, and the results will make a few hundred meters outside the examination room and even a few kilometers away, mobile phone users can not communication, causing serious disputes. RSB-01A cell phone jammer fundamental solution to this problem, which is targeted to all domestic mobile phone jamming signals, including the latest 3G, 3-band, using sub-screen mode, only the downlink interference signal, must does not affect the mobile operators uplink signals to the electromagnetic environment green pollution-free.
RSB-01A cell phone jammers use of plastic materials, to solve the problem hot metal fuselage, fuselage lightweight easy to carry, built-in antennas do not need to install the antenna, saving valuable time and can avoid an error caused by the wrong antenna position operation. Dual cooling fan design to ensure a good long life.
3. Industrial power, special shell design, Car charger (Optional)
Power is the heart of electronic products, regardless of any electronic products, the most important thing is the quality of power supply, RSB-01A with built-in dual-metal industries, switching power supply, the power supply is designed specifically for jamming device can ensure uninterrupted operation for 3 years more greatly ensure the service life of each channel has sufficient bandwidth and power. RSB-01A human design, can adjust the screen up and down about the direction of targeted areas in need of jamming. Can be wall-mounted or simply placed on the table. Furthermore, the unique cell phone jammer can car charge for being used in any vehicles conveniently.
4. For places
In the examination rooms, meeting rooms, bank halls, hosptial waiting rooms, private rooms, prison cells, security prohibited areas, casino, theatres, churches, temples, trains, buses and so on.
