1) Main function: recording video and audio at the same time, USB drive. 2) Video format: AVI, 720*480 resolution 3) Internal Memory: 2GB/4GB/8GB 4) USB interface: 2.0ú¿Hsú¬ 5) Charging time: 3-4 hours 6) Charging voltage:DC-5V 7) Battery use time: built-in Li battery, can work continually 2-3 hours 8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ VISTA or above (windows98 is excepted) Operationu Switch onOpen the cover on the bottom the bottle, under power-off mode, press the switch button to the í Attention: Assure that the device is under power on mode when reset time. Attention 1) If it's lack of electricity while recording, the file will be saved before the device turns off. 2) When taking video continually, the system will automatically generate a new video file after each operation. 3) Under a bright environment, keep camera vertical, stable and keepcertain distance from the scene you want to record in order to achieve a best effect . 4) Connect to computer: The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can't identify, please make sure your operating system, drivers and USB interface cable in good work order, then connect again.
l Technical Data 1) Main function: recording video and audio, taking photo, PC camera, USB drive 2) Video format: AVI, 1280*960 3) Photo format: JPEG, 1280*960 4) External memory: SD card 2GB-8GB 5) USB interface: 2.0 6) Charging time: 2-3 hours 7) Battery time: built in Li-battery, 1~2 hours. 8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ Vista or above (Windows98 is excepted) l Operation u Switch onInsert SD card into the slot before power on. u Recording video and audio1) Press Power on/ff button for some seconds, yellow and blue light turn on together, 2 seconds later, both of them turn off, it starts recording. 2) Press the button once, the light turns yellow, the device stop recording and store the data. It comes to video & photo standby mode again. At this time, press Power on/ff button for some seconds again, yellow light turns off, the camera start recording again. u Taking photoUnder photo standby mode, press Power on/ff button once, yellow light flashes once then turns off, one photo is taken and saved. u Switch offUnder standby mode or video recording mode, press Power on/ff button for some seconds, the blue light flashes 2 times then turns off. Under any mode, insert the clip to the reset hole, the camera will power off. Attention: while recording mode, press the reset hole to power off, the video can not be saved. u ResetUnder incorrect operation or a certain reason, the camera may stop working, at this time, insert the clip into the reset hole to reset, then the camera is under power off mode. While resetting, just a little strength is enough. u Play back videoUnder power off mode, connect USB cable with the camera first, then connect the USB cable with computer, there will be a moveable disk shown on computer, click the disk and playback the video. Attention: when there is no action with computer, reset the camera with the clip, then reconnect the camera with computer. u PC cameraUnder power on mode, connect the camera with computer, install the PC camera software STK02N 2.0.exe in the manual CD, the PC camera will work. u ChargingIf the device is of low electricity, yellow light and blue light flash two times together, then power off, the video file will be saved automatically before shutting down. 1) Connect the camera with computer, when charging, yellow light keeps on, yellow light and blue light turn on together when fully charged. 2) Connect the camera with charger, when green light of the charger keeps on, indicating it is being charged. When the yellow light turns off, it shows that the camera is fully charged. Attention: charging via charger is suggested. u Set ting timeWhen using the device for the first time, you can reset the time through the following way: 1) Connect the camera with computer 2) Create a new í¦ time.txtí¦ file 3) Edit time as format: 2010.12.12 12:12:12 in the file 4) Copy the file to the root of the disk of the camera 5) When starting the camera again next time, the time will be simultaneous as the time file. l Attention 1) When the device is lack of battery when taking video, the system will save the video data first, then shut down automatically. 2) Connecting computer: while connecting, do not do any operation, if the device cannot be recognized by computer, please check the computer system, driver, USB port, USB cable, then reconnect. 3) As the devise has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly. 4) While resetting, just a little strength is enough.
Passageway Interior Size Width 30" (0.76 m) Height 80" (2.03 m) Depth 23" (0.58 m) Overall Exterior Size Width 35" (0.90 m) Height 87" (2.21 m) Depth 23" (0.58 m) Shipping Size Width 35.5" (0.90 m) Height 91.5" (2.32 m) Depth 6.25" (.16 m) Weight: 143 lbs. (64 kg) Shipping Weight: 165 lbs. (74 kg).
1.Six overlapping detection region of the same height of human body. 2.With LED alarm light on columns displaying the accurate position of the targets. 3.Four corresponding infrared transmitters and receivers,no blind area. 4.Sensitivity of every area can be adjusted independently from 0-99,without the interference of scheduled metals. 5.Microprocessor digital control technology,strong anti interference ability. 6.The function of statistics:the number of passengers and alarms can be count. 7.It can be used independently or work together with the same mod(minimum spacing can be up to 40cm),to meet the requirements of the personnel large flow. 8.Password protection function:only the authorized person can operate it. 9.No harm to people, film and magnetic recording materials. 10.Installed conveniently:just put self-made four corner screws fixed door,plug in 220V power supply can be put into use
Economical and practical, beautiful appearance, it can exactly detect the location of metals that walk through person takes.Especially designed for factory , exhibition areas for indoors check.Such as hardware and electronic manufacturer check if the person steal the metals
6,12, 18 detecting zones Indoor use model: AT-IIIA,IIIC,IIID Waterproof model: AT-300A, 300B Two or four LED light bars Sensitivity adjustable from Level 0 to 299 High: Can detect a clip Shockproof to avoid false alarm LED or LCD display Sound and light alarm
Features 1.Highly sensitivity. 2.Simple and convenient to use, no adjustment is required. 3.The detection distance will not be changed when the battery voltage drops from 9V to about 7V. 4.Low power consumption, can work for 40 hours continuously. 5.There is automatic and continues alarm when the battery is used up. 6.Switch on/off audio prompt function. 7.With external rechargeable socket hole. 8.Has audio, Light and vibration hand off switch.
With belt holster, large detect zone Dimension of unit: 410 * 80 * 420 mm (l*w*h) Net weight of unit: 400 g Operate frequency: low Operating temperature: -5to +55 Operate current: < 50ma Power: 9v (6f22) alkaline battery , operate voltage 7v-9v Alarm: video led & audio/ video led & vibration Sensitivity adjust knob Sensitivity level: detect pistol at 90mm, six inches knife At 60mm, razor blade at 30mm, pin at 10mm Packing: 25pcs/ctn, n.W.: 10kg/ctn , g.W:14kg/ctn Dimension of packing: 530 *510 * 290 mm
Walk through metal detector Model:ub500 6 zones standard Parameters Power supply:ac85v-264v Working temperature:-20?--+50? Working frequency :4khz—8khz Standard external size: 2200mm(h)x800mm(w)x580mm(d) Standard internal size: 2010mm(h)x700mm(w)x500mm(d) Package size for door panels: 2260*650*260mm *1ctn Package size for control unit: 780*390*250 mm*1ctn Gross weight: 70kg Characteristic & function Six mutual over-lapping detecting zones, simultaneous alarm from multi- zones; Sensitivity adjustable: each zone has 100 sensitivity level Sound & led alarm: both side led indicator , Easily show where the metal is. Automatically count passengers and alarm times Alarm strength indicator on control panel Password protection, only the authorized person can operate. Easy assembly: designed with only 2 pieces cables and 8 screws, simply-to-follow instruction. Harmless to human body: is harmless with heart pacemaker, pregnant women, magnetic floppy, recording tapes, etc. Using high density fireproof material Program self-diagnostic when power on, no need initial or periodic calibration Modularization design, easy for maintenance and replacement. Sensitivity test piece: one yuan coin, omnidirectional detection 4-8 hours backup battery (option) Application Exhibition center, electronic factory, bank, prison, government office, hotel etc
