We can supply good quality barbed wire and razor wire for security and fencing uses. Wire Materials: Galvanized steel wire, PVC coated iron wire in blue, green, yellow and other colors. Usage: Barbed Wire mainly serves in protecting of grass boundary, railway, highway and also widely used in military, jail, industry, agriculture, animal husbandry, dwelling house, plantation for fencing. Gauge of Strand and Barb in B.W.G. Approximate Length per Kilo in Meter Barbs Spacing 3" Barbs Spacing 4" Barbs Spacing 5" Barbs Spacing 6" 12x12 6.0617 6.7590 7.2700 7.6376 12x14 7.3335 7.9051 8.3015 8.5741 12-1/2x12-1/2 6.9223 7.7190 8.3022 8.7221 12-1/2x14 8.1096 8.814 9.2242 9.5620 13x13 7.9808 8.899 9.5721 10.0553 13x14 8.8448 9.6899 10.2923 10.7146 13-1/2x14 9.6079 10.6134 11.4705 11.8553 14x14 10.4569 11.6590 12.5423 13.1752 14-1/2x14-1/2 11.9875 13.3671 14.3781 15.1034 15x15 13.8927 15.4942 16.6666 17.5070 15-1/2x15-1/2 15.3491 17.1144 18.4060 19.3386
Steel Reinforcing Mesh Roll is used to provide tensile strength and crack control to structural concrete elements. Steel reinforcing mesh is the thin ribbed wire that can be make rolls presentation. Advantages to save more than 33% of steel, reducing costs 10% -30%; increase the speed of construction can shorten the duration of about 80%; to improve the quality of engineering structures, and concrete bonding anchoring reliable, smooth reinforcement bond strength equal to three times more, and the overall good, deviation is small, anti - cracking performance above 75%. Application Retaining and shear walls Beams and columns Concrete paving overlays Precast concrete elements Suspended floor slabs Swimming pool and gunite construction size(mm) 2.8-5.3 Reinforcement spacing(mm) Longitudinal wire 50-200mm Cross wire 30-1000mm Sheet size Length 2-50m Width 1-1.3m Mechanical and process property Meet GB/T1499.3-2002 standard;AS/NZS 4671; 2001,BS 4483:2005,A185-02
Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam. Specification of trench mesh reinforcement Surface treatment:galvanized or drawn wire Material: R250N, D500N, D500L, D300E, D500E The Tensile strength is 300Mpa. The trench mesh was produced by standard AS NZS 4671-2001 Width: 0.2m - 2.3m Length: 6m REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 And Alls of using is accordance to AS NZS 2870-2011. 1. Footing slap The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments. The trench mesh is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different. 2. Waffle rafts beam and piers The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft: (a). pier to be located on the intersection of every third internal beam. (b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.
Concertina Razor Wire is also named Razor wire or razor type barbed wire. It is a kind of modern security fencing materials with better protection and fencing strength made of hot-dipped galvanized steel sheets or stainless steel sheets. With beautiful and sharp blades and strong core wire, razor wire has the features of secure fencing, easy installation, age resistance and other properties. Concertina Razor Wire is widely used in high-grade residence district, warehouses, prisons and in military fields and other sites requiring severe fencing and security. Razor wire can be classified into straight type razor wire, concertina coils, crossed type and flat type according to the installation models. Outside Diameter No. of Loops Standard Length per Coil Type Notes 450mm 33 8M CBT-65 Single coil 500mm 41 10M CBT-65 Single coil 700mm 41 10M CBT-65 Single coil 960mm 53 13M CBT-65 Single coil 500mm 102 16M BTO-10.15.22 Cross type 600mm 86 14M BTO-10.15.22 Cross type 700mm 72 12M BTO-10.15.22 Cross type 800mm 64 10M BTO-10.15.22 Cross type 960mm 52 9M BTO-10.15.22 Cross type Reference Number Blade Style Thickness Wire Dia Barb Length Barb Width Barb spacing BTO-10 0.5±0.05 2.5±0.1 10±1 13±1 25±1 BTO-12 0.5±0.05 2.5±0.1 12±1 15±1 25±1 BTO-18 0.5±0.05 2.5±0.1 18±1 15±1 35±1 BTO-22 0.5±0.05 2.5±0.1 22±1 15±1 36±1 BTO-28 0.5±0.05 2.5 28 15 46±1 BTO-30 0.5±0.05 2.5 30 18 46±1 CBT-65 0.6±0.05 2.5±0.1 65±2 21±1 101±2
Reinforcing Trench Mesh made from CRB550(550MPa) ribbed wires. The reinforcing trench mesh products all come 6.0m longs, available in 3-Bar, 4-Bar, 5-Bar and 6-Bar, as well as 8, 11 and 12mm wires. Its long, narrow sheets of concrete reinforcing mesh, has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. Used specifically for residential footing trenches, paths or other narrow spaces. Length m Width m Longitudinal Wires mm Cross Wires mm Mass Kg 6.0 0.2 7.6 @ 100 4.77 @ 300 7 6.0 0.3 7.6 @ 100 4.77 @ 300 9 6.0 0.4 7.6 @ 100 4.77 @ 300 12 6.0 0.5 7.6 @ 100 4.77 @ 300 14 6.0 0.2 10.7 @ 100 4.77 @ 300 13 6.0 0.3 10.7 @ 100 4.77 @ 300 18 6.0 0.4 10.7 @ 100 4.77 @ 300 22 6.0 0.5 10.7 @ 100 4.77 @ 300 27 6.0 0.2 11.9 @ 100 4.77 @ 300 16 6.0 0.3 11.9 @ 100 4.77 @ 300 22 6.0 0.4 11.9 @ 100 4.77 @ 300 27 6.0 0.5 11.9 @ 100 4.77 @ 300 33
Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets. The fabric is used to provide tensile strength and crack control to structural concrete elements. Advantages: Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons : The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management. The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process. Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls. Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²: REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg) SL81 7.60@100 7.60@100 7.60@100 105 SL102 9.50@200 9.50@200 9.50@200 80 SL92 8.55@200 8.55@200 8.55@200 65 SL82 7.60@200 7.60@200 7.60@200 52 SL72 6.75@200 6.75@200 6.75@200 40 SL62 6.00@200 6.00@200 6.00@200 33 SL52 4.75@200 4.75@200 4.75@200 21 Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m². REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg) RL718 25*6.75@100 30*7.60@200 68 RL818 25*7.60@100 30*7.60@200 79 RL918 25*8.55@100 30*7.60@200 93 RL1018 25*9.50@100 30*7.60@200 109 RL1118 25*10.65@100 30*7.60@200 131 RL1218 25*11.90@100 30*7.60@200 157
Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh. Material: steel bar Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect. Wire diameter: welded steel bar panels ranges from 5mm to 16mm. Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Features: Solid construction, Easy handling Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request
The slab mesh reinforcement is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS 4671-2001. the popular specification is SL102, SL92, SL82, SL72, SL63, SL53, L8TM, L11TM, L12TM in the Australia and New Zealand civil engineeing. The slab mesh reinforcement includes reinforcement mesh and trench mesh. Aoriding to different construction site, they use the spcification of slab meshes are difference. The full of slab mesh reinforcement specification as below: REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 Slab mesh reinforcement for footing slab, beam and piers RIBBED RECTANGULAR MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG RL718 6 x 2.4m Sheet 25 x 6.75 @ 100 30 x 7.60 @ 200 67 RL818 6 x 2.4m Sheet 25 x 7.60 @ 100 30 x 7.60 @ 200 79 RL918 6 x 2.4m Sheet 25 x 8.60 @ 100 30 x 7.60 @ 200 93 RL1018 6 x 2.4m Sheet 25 x 9.50 @ 100 30 x 7.60 @ 200 109 RL1118 6 x 2.4m Sheet 25 x 10.70 @ 100 30 x 7.60 @ 200 130 RL1218 6 x 2.4m Sheet 25 x 11.90 @ 100 30 x 7.60 @ 200 157 Slab mesh reinforcement for footing slab, beam and piers REINFORCING MESH TO AS/NZS4671:2001 / RIBBED SQUARE MESH 6.0 X 2.4 METRES Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL52 6 x 2.4m Sheet 10 x4.77 @ 200 + 4 x 4.00 @ 100 30 x 4.77 @ 200 21 SL62 6 x 2.4m Sheet 10 x 6.00 @ 200 + 4 x 4.24 @ 100 30 x 6.00 @ 200 33 SL72 6 x 2.4m Sheet 10 x 6.75 @ 200 + 4 x 4.77 @ 100 30 x 6.75 @ 200 41 SL82 6 x 2.4m Sheet 10 x 7.60 @ 200 + 4 x 5.37 @ 100 30 x 7.60 @ 200 52 SL92 6 x 2.4m Sheet 10 x 8.60 @ 200 + 4 x 6.00 @ 100 30 x 8.60 @ 200 66 SL102 6 x 2.4m Sheet 10 x 9.50 @ 200 + 4 x 6.75 @ 100 30 x 9.50 @ 200 80 SL81 6 x 2.4m Sheet 25 x 7.60 @ 100 60 x 7.60 @ 100 105 Slab mesh reinforcement for footing slab, beam and piers SQUARE MESH 300 X 300 SPACING TO AS/NZS4671: 2001 Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL53 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 14 SL63 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 21
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances meassure way as: a. Panel Size dimensionsâ?¤6m in length, there is 40mm tolerances. b. Panel size dimensionsï¼?6m in length, the tolerance is ±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
Material: AISI304, AISI 304L, AISI 316, AISI 316L etc. Mesh count: 8mesh-80mesh. we can also produce the following size: Normal mesh size: Plain weave: 0.5X0.5mesh to 635X635 mesh; Twill weave:20x20mesh to 400x400mesh; Plain dutch weave:10X64mesh to 80X700mesh; Twill dutch weave:20x250mesh to 400X2800mesh; Reversed dutch weave: 48x10mesh to 720x150mesh. Wire diameter: 0.1mm-0.4mm, other wire dia such as 0.025mm-1.8mm is also available. Features: High tension: Much higher tension than common polyester mesh and smooth tensio Super precision: Uniform wire diameter and aperture with extremely low difference Low elongation: Very small elongation of wire mesh at high tension High flexibility: The wire mesh will not lose elasticity at extreme tension High corrosion resistance: The excellent corrosion resistance of stainless steel wire exceeds polyester fiber.
High Grade Micron Stainless Steel Woven Wire Mesh Filter / Sieve Screen Hebei Maishi Wire Mesh Manufacture Group is one of the leading manufactures of wire mesh in China and we always support our customers high grade micron stainless steel mesh,favorable price and best customer service make us win more than 90% repeat orders, welcome to contact us if you are finding reliable wire mesh supplier. High Grade Micron Stainless Steel Woven Wire Mesh Filter / Sieve Screen Product Type: High Grade Micron Stainless Steel Woven Wire Mesh Filter / Sieve Screen Material: 304, 304L, 316, 316L, etc. Wire diameter: 0.025-1.8mm Mesh count: 2mesh-635mesh Application: sieving and filtering in acid, alkali environment Features: alkali and acid resistence, abrasive resistence Weaving Method: plain weave, twill weave, plain dutch weave, twill ducth weave, reverse dutch weave, five-heddle weave
Product Type: HGood Quality Micron Stainless Steel Woven Filter / Sieve Screen Mesh Material: 304, 304L, 316, 316L, etc. Wire diameter: 0.025-1.8mm Mesh count: 2mesh-635mesh Application: sieving and filtering in acid, alkali environment Features: alkali and acid resistence, abrasive resistence Weaving Method: plain weave, twill weave, plain dutch weave, twill ducth weave, reverse dutch weave, five-heddle weave
Stainless Steel filter mesh MAISHI Wire Mesh Manufacture Group is a professional wire mesh manufacturer in China and has produced screen wire mesh since 1986. our main market is USA, Germany etc. And we have strict quality control system to ensure the mesh quality. If you need mesh product (including deep processing product), please do not hesitate to contact us.We will do our best to support you. Stainless Steel filter mesh Material: SS304,SS316 Stainless Steel Wire Weave Type: Plain weave, Twilled weave, Dutch weave Stainless Steel filter mesh Wire Diameter: 0.025-1.8mm Performance : Corrosion-resisting, Wear-resisting, Tear-resisting Uses: Mainly used for Filter, protect, Food industry, Chemical industry and so on.
100% monofilament polyester silk mesh for screen printing With more than 30 years' experience of polyester screen mesh, MAISHI Wire Mesh MFG has been one of the leading manufacturers in China, our polyester mesh use best jintong yarn to ensure the mesh quality and is widely used for printing, such as t-shirt, glass ink etc. And our product is higher Tension Strength and low elongation, can enaure the printing quality. Welcome to contact us if you have any inquiry. 1. Material: 100%Polyester 2. Shape of the hole: square 3. Function: Printing 4. Mesh count: 305mesh, 380 mesh, 420 mesh, 15mesh-355mesh is also available 5. Size available: standard and custom sizes 6. Characteristic :high tensity,low elongation,excellent dimensional stability For more details, please consult the website.ï¼?https://www.printing-mesh.com
100% polyester slik screen mesh for printing With more than 30 years' experience of polyester screen mesh, MAISHI Wire Mesh MFG has been one of the leading manufacturers in China, our polyester mesh use best jintong yarn to ensure the mesh quality and is widely used for printing, such as t-shirt, glass ink etc. And our product is higher Tension Strength and low elongation, can enaure the printing quality. Welcome to contact us if you have any inquiry. 1. Material: 100%Polyester 2. Shape of the hole: square 3. Function: Printing 4. Mesh count: 305mesh, 380 mesh, 420 mesh, 15mesh-355mesh is also available 5. Size available: standard and custom sizes 6. Characteristic :high tensity,low elongation,excellent dimensional stability
MAISHI Wire Mesh Manufacture Group is a professional nylon mesh manufacturer in China with over 30 years' experience. MAISHI is capable of heat-slitting mesh into mesh ribbons without fraying edges. Our mesh can be used as nylon filter cloth and is food grade and widely used for air filter,solid filter and liquid filter, welcome to contact us if you have nylon mesh inquiry. Opening size: from 40 micron to 1900 micron Material: PA6 (food grade) Width range from: 1.27m or at request Shape: can be made into Ribbons, rolls, Tubes, discs, pieces Finishing: 1. Hot or cold cut mesh to different shapes 2. Heat-sealed Mesh Filter Bags 3. Welded Filter Tubes 4. Stamping Mesh Filter Elements Characters: the mesh with great precision exact and regular square holes, food grade, very good dimensional stability and no any chemicals treatment in the production process Applications: avaliable in standard and food grade for food, chemicals, medical applications. https://www.printing-mesh.com
Usage: cleaning Material:Stainless Steel,ss410/430,Galvanized,copper,Brass,ss410/430,Galvanized,copper,Brass Etc Feature:Eco-Friendly, Stocked Place of Origin:Shandong, China (Mainland) Production Name:Galvanized mesh roll Color:Sliver Advantage:Strong Cleaning Capacity Packing:polybag or as your request Logo:available Weight:5-100g Certificate:CE Sample:free MOQ:3tons Supply Ability:20 Ton/Tons per Month
Usage: cleaning Material:Stainless Steel,ss410/430,Galvanized,copper,Brass,ss410/430,Galvanized,copper,Brass Etc Feature:Eco-Friendly, Stocked Place of Origin:Shandong, China (Mainland) Production Name:Galvanized mesh roll Color:Sliver Advantage:Strong Cleaning Capacity Packing:polybag or as your request Logo:available Weight:5-100g Certificate:CE Sample:free MOQ:3tons Supply Ability:20 Ton/Tons per Month
Usage: cleaning Material:Stainless Steel,ss410/430,Galvanized,copper,Brass,ss410/430,Galvanized,copper,Brass Etc Feature:Eco-Friendly, Stocked Place of Origin:Shandong, China (Mainland) Production Name:Galvanized mesh roll Color:Sliver Advantage:Strong Cleaning Capacity Packing:polybag or as your request Logo:available Weight:5-100g Certificate:CE Sample:free MOQ:3tons Supply Ability:20 Ton/Tons per Month
Our Advantage: 1.Available in 5 ft.and 10ft. lengths; 2.Elector Zinc Plated for a professional look; 3.Full line of accessories are available to mount on the wall,from the ceiling or under he door; 4.Cuts easily with bolt cutter for custom configurations; 5.Cable Trays bolt together to any custom configurations; 6.Stackable Cable Guides available to separate and secure cables in place; 7.Complete line of accessories available. Certificate CE, CUL, ROHS, ISO, SGS Material Q235, SS304, SS316 Surface Finish Electro Zinc,Hot Dipping, Powder Coating Width 50mm, 100mm, 150mm, 200mm, 300mm, 400mm, 600mm, 800mm Height 30mm, 50mm, 100mm, 150mm, 200mm Diameter 4mm, 5mm, 6mm Length 3000mm Application Data Center, Communication Room, Financial Industry Room, Government Office and so on...
