Steel Reinforcing Mesh Roll

Reinforcement steel mesh was welded by automatic electrical resistance welding machines conformance to standard AS-NZS 4761-2001. The material of reinforcement steel mesh is 250N, 500N, 500L, 300E, 500E. Reinforcement steel mesh is very poupular in civil engineering and construction. It always used on road subgrade, building foundation, tunnel support and reinforced,mine and coal reinforced and support, bridge construction etc. During construction works, It is not only increase our working speed and time but also save 75% construction cost and enhance the crack resistance. The specification of rectangular reinforcement steel mesh as below: Rectangular Reinforcing Mesh 2.4m*6m=14.4sqm Code Cross wire Longwire mm Mass/sheetkg Quantityin pack Pitch@mm No. x dia., mm Pitch@mm No. x dia., mm RL718 7.60 @ 200 30 x7.6 6.75 @ 100 25 x 7.6 68 20 RL818 7.60 @ 200 30 x7.6 7.60 @ 100 25 x7.6 79 20 RL918 7.60 @ 200 30 x7.6 8.55 @ 100 25 x 8.55 93 20 RL1018 7.60 @ 200 30 x7.6 9.50 @ 100 25 x9.5 109 15 RL1118 7.60 @ 200 30 x7.6 10.65 @ 100 25 x10.65 131 15 RL1218 7.60 @ 200 30 x7.6 11.90 @ 100 25 x11.9 157 10 The panel size 2.4m*6m is very pouplar in Australian market,but considered the transportation in container by sea and saved cost, we advise the customers to change the panel size to be 2.2m x5.8m.

Welded Wire Reinforcement (WWR) provides the exact size of reinforcement where needed through variable bar size and spacing, thereby reducing steel waste. Plain Square Mesh sheets are a multi-purpose mesh and complies with AS/NZS 4671 : 2001 Steel reinforcing materials. Plain Square Mesh sheets are available in 6 x 2.4 m. Associated standards: AS/NZS 4671 : 2001 Steel reinforcing materials Application: Welded Wire Reinforcement can be used for: Slab on Grade reinforcement Floor and Walls Systems Topping Slabs Architectural precast wall panels Tilt-up construction wall systems Shear walls Retaining walls Mechanically Stabilized Earth (M.S.E.) reinforcement

A142 mild steel mesh is used widely across a range of industries and sectors. Reinforcing mesh is most often used in the construction industry for reinforcing concrete slabs in floors and other structures. A142 steel mesh is usually lowered into concrete as it sets, the concrete will then grip the a142 mesh making it more tensile and robust. Steels have a very similar coefficient to that of concrete, this helps to reduce internal strains caused by a change temperature, helping to make a strong robust material. A142 specifications: Wire thickness 6mm Mesh aperture size (square size) 200mm x 200mm Sheet size 2400mm x 1200mm A393 reinforcing mesh Main wires: 10mm Cross wires: 10mm Mesh size: 200mm x 200mm Weight: 6.16 kg/m2

According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh. Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh. In accordance with the customer's request.

Stainless Steel Welded Rolls Mesh The Stainless steel welded wire mesh is producting of Stainless Steel wire to Welded for The mesh , The hole or mesh smooth,nice surface and strong structural .Never no rust .better than galvanized welded wire mesh. The Small wire diameter can done the roll mesh ,Called Stainless Steel welded Roll mesh . Material : stainless steel wire SS201.SS202.SS302.SS304. SS 304L .SS 316 SS 316L Mesh Wire Diam Inch mm BWG mm 1/4" 1/4" 6.4mm 6.4mm 22# - 24# 0.7mm - 0.6mm 3/8" 3/8" 10.6mm 10.6mm 19# - 22# 1.0mm - 0.7mm 1/2" 1/2" 12.7mm 12.7mm 16# - 23# 1.6mm - 0.6mm 5/8" 5/8" 16mm 16mm 18# - 21# 1.2mm - 0.8mm 3/4" 3/4" 19.1mm 19.1mm 16# - 21# 1.6mm - 0.8mm 1" 1/2" 25.4mm 12.7mm 16# - 20# 1.6mm - 0.9mm 1" 1" 25.4mm 25.4mm 14# - 21# 2.0mm - 0.8mm 11/2" 11/2" 38mm 38mm 14# - 19# 2.0mm - 1.0mm 1" 2" 25.4mm 50.8mm 14# - 16# 2.0mm - 1.6mm 2" 2" 50.8mm 50.8mm 12# - 16# 2.6mm - 1.6mm Technical Note: 1,Standard roll length: 30m;width: 0.5m to 2.5m 2,Special sizes available at request 3,Packing: in waterproof paper in rolls. Custom packing available at request Special specifications can be customized. Characteristics: It has the good property of corrosion-resisting and oxidation-resisting. Usage: It is widely used on the industry, agriculture, building, transportation, mine, field, lawn, cultivation, Professions guard,decorate, machine protection etc.

Concrete reinforcing mesh 1.Wire diameter:3mm-14mm 2.Mesh:5*5cm, 10*10cm, 10*20cm, 20*20cm, 10*30cm, 30*30cm 3.Iso & sgs Packed with the iron or wooden pallet.

Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x 2400mm Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT

Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x (200mm, 300mm, 400mm, or 500mm); width is dependent on number of wires (3,4, 5, or 6) Main Wire: 7.60@100, 10.70@100, 11.90@100 mm Cross Wire: 4.00@300, 4.75@300 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT